slightly under 10kg ready to ride now, but changed some parts
Lux Build: Send help!
Moderator: Moderator Team
I measured 10.08 kg out of the box. Size L
![](https://weightweenies.starbike.com/starbike-bike-shop.gif)
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Have you found the place of the spacer, that you mentioned on mtb-news.de forums?
![Smile :)](./images/smilies/icon_smile.gif)
![Image](https://www.mtb-news.de/forum/data/attachments/1551/1551081-1f7c2901bb5efa4754109b473c2b67c7.jpg)
On rough terrain, sometimes I can hear a rattling noise from the area of the rear hub. Took me a while until I found that out, it is actually a lever of the axle, which can a little bit knocking the inner side of the hollow axle (despite of the little rubber parts).
My Lux CFR came with this axle: https://www.canyon.com/en-hu/gear/bike- ... 10452.html
So I would like to buy a simple replacement axle which doesn't have lever.
Do you know, any brand offers a 100% compatible axle to this frame?
I tried to look around and found that, this has a Syntace-like cone end at the brake-side and must have a Sram UDH-compatible thread on the other end but I found only ~3-4 mm shorter axles so far, which can be compatible.
At Canyon's site I can see that, 2021- Excess CF, SLX and CFR models also uses this axle.
![Image](https://www.canyon.com/dw/image/v2/BCML_PRD/on/demandware.static/-/Sites-canyon-master/default/dwfac20093/images/full/10010452/2022/10010452.jpg?sw=874&sfrm=png&q=90&bgcolor=F2F2F2)
My Lux CFR came with this axle: https://www.canyon.com/en-hu/gear/bike- ... 10452.html
So I would like to buy a simple replacement axle which doesn't have lever.
Do you know, any brand offers a 100% compatible axle to this frame?
I tried to look around and found that, this has a Syntace-like cone end at the brake-side and must have a Sram UDH-compatible thread on the other end but I found only ~3-4 mm shorter axles so far, which can be compatible.
At Canyon's site I can see that, 2021- Excess CF, SLX and CFR models also uses this axle.
![Image](https://www.canyon.com/dw/image/v2/BCML_PRD/on/demandware.static/-/Sites-canyon-master/default/dwfac20093/images/full/10010452/2022/10010452.jpg?sw=874&sfrm=png&q=90&bgcolor=F2F2F2)
Cool, thanks!
I have an up-to-date pic also (sorry for the quality, took it too quickly yesterday). Mainly equipped with the original parts, except for the Power2Max NGeco power meter and 70mm PRC stem + Berg 760mm handlebar. Also an old-school dropper installed, which is a 385/125mm 30.9 KS Dropzone (yes, a non-remote one!
).
Okay, the shock has been also changed to a non-remote SIDluxe (which has a slightly more progressive tune than the original remote one, with 1 volume spacer and 2 shims also different inside). Excellent climber, even in non-locked mode!![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Image](https://dgtzuqphqg23d.cloudfront.net/3ahZKpaEFbA0PlOiSZWGgHcnZFxkO9T0nd9q7zV96D8-2048x1152.jpg)
![Smile :)](./images/smilies/icon_smile.gif)
![Thumb up! :thumbup:](./images/smilies/icon_thumbup.gif)
I have an up-to-date pic also (sorry for the quality, took it too quickly yesterday). Mainly equipped with the original parts, except for the Power2Max NGeco power meter and 70mm PRC stem + Berg 760mm handlebar. Also an old-school dropper installed, which is a 385/125mm 30.9 KS Dropzone (yes, a non-remote one!
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Okay, the shock has been also changed to a non-remote SIDluxe (which has a slightly more progressive tune than the original remote one, with 1 volume spacer and 2 shims also different inside). Excellent climber, even in non-locked mode!
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Image](https://dgtzuqphqg23d.cloudfront.net/3ahZKpaEFbA0PlOiSZWGgHcnZFxkO9T0nd9q7zV96D8-2048x1152.jpg)
You can get that cone seperate. I think Specialized (Epic / Chisel / etc) uses the same axle and some measure wight and without the cone. Are you thinking 148mm is the size or did you measure it? It should be 148mm + ~10-12mm on each side for the frame droupouts, so you're looking at a 166mm axle likely. Measure your frame dropouts thickness on each side + 148mm + ~1mm for the cone.zscs wrote: ↑Wed Apr 05, 2023 8:09 amOn rough terrain, sometimes I can hear a rattling noise from the area of the rear hub. Took me a while until I found that out, it is actually a lever of the axle, which can a little bit knocking the inner side of the hollow axle (despite of the little rubber parts).
My Lux CFR came with this axle: https://www.canyon.com/en-hu/gear/bike- ... 10452.html
So I would like to buy a simple replacement axle which doesn't have lever.
Do you know, any brand offers a 100% compatible axle to this frame?
I tried to look around and found that, this has a Syntace-like cone end at the brake-side and must have a Sram UDH-compatible thread on the other end but I found only ~3-4 mm shorter axles so far, which can be compatible.
At Canyon's site I can see that, 2021- Excess CF, SLX and CFR models also uses this axle.
![]()
I think Canyons axle is the same as this https://www.rapilock.com.tw/en/product- ... e-147.html
New Lux WC CFR LTD comes with XX SL (including power meter) and new SID SL, etc.
https://www.canyon.com/en-hu/mountain-b ... /3512.html
![Image](https://www.canyon.com/dw/image/v2/BCML_PRD/on/demandware.static/-/Sites-canyon-master/default/dwfe478cf4/images/full/full_2023_/2023/full_2023_3512_lux-wc-cfr-ltd_bk-gn_P5.jpg?sw=874&sfrm=png&q=90&bgcolor=F2F2F2)
![Wink ;)](./images/smilies/icon_wink.gif)
![Image](https://www.canyon.com/dw/image/v2/BCML_PRD/on/demandware.static/-/Sites-canyon-master/default/dwfe478cf4/images/full/full_2023_/2023/full_2023_3512_lux-wc-cfr-ltd_bk-gn_P5.jpg?sw=874&sfrm=png&q=90&bgcolor=F2F2F2)