I think you don't want to know
We need to rob a bank these days to buy a bike.
Moderator: Moderator Team
I think you don't want to know
Just put it into enough bubble foil, it won't move anywhere. And after pairing you won't need to use the blipbox anymore. FYI: micro adjustments could only be done with the "original" AXS shifter!Kristinka wrote: ↑Sat May 29, 2021 8:40 pmThank you for your reply. I am also planing to use Blipbox with the Zirbel Twister. I have already bought the AXS Blipbox. I am yet to order the Zirbel. I just need to think up where to place it and thus the cable lenght needed.
How is the Blip attached inside of the frame? Did you glued it in? How do you reach the Blipbox button? Do you need to use the button often?
You will need access to the button on the blipbox to upgrade the firmware.thepassista wrote: ↑Mon May 31, 2021 10:07 am...And after pairing you won't need to use the blipbox anymore. FYI: micro adjustments could only be done with the "original" AXS shifter!
Hi, any feedback on the carbocambers?thepassista wrote: ↑Mon May 17, 2021 3:40 pm
Thanks! Wheels has been already changed to Extralite CarboCamber 2 - Berd spoke edition (27mm inside width, 995gr/set)
8.6kg right now
Will try to take some new photos, while it's clean
Hi!njyeti wrote: ↑Sat Jun 19, 2021 3:50 amHi, any feedback on the carbocambers?thepassista wrote: ↑Mon May 17, 2021 3:40 pm
Thanks! Wheels has been already changed to Extralite CarboCamber 2 - Berd spoke edition (27mm inside width, 995gr/set)
8.6kg right now
Will try to take some new photos, while it's clean
That's a good call about bringing the spare wheelset to races (frankly one of my hesitations with going with Berd- but I'm still very interested. Any opinion on the Extralite hubs? Have you been running them during daily use as well? Thanks!thepassista wrote: ↑Tue Jun 29, 2021 3:30 pm
I only have the factory Bontrager XXX set as comparison. But they do feel lighter (not a suprise) and has def. better vibration absoption.
Used on a few XCM races, so far so good. But will bring the XXX set as a backup for stage races.... Would be hard (if not impossible) to find anybody who can repair the Berd spokes..
If i'm right, Berd sell builder kit, (cannot find it now) which would be necessary to repair/replace a spoke. Extralite gave two spare spokes but, no way to change it without that kit.njyeti wrote: ↑Wed Jun 30, 2021 3:04 amThat's a good call about bringing the spare wheelset to races (frankly one of my hesitations with going with Berd- but I'm still very interested. Any opinion on the Extralite hubs? Have you been running them during daily use as well? Thanks!thepassista wrote: ↑Tue Jun 29, 2021 3:30 pm
I only have the factory Bontrager XXX set as comparison. But they do feel lighter (not a suprise) and has def. better vibration absoption.
Used on a few XCM races, so far so good. But will bring the XXX set as a backup for stage races.... Would be hard (if not impossible) to find anybody who can repair the Berd spokes..