Sram S2200 help

Discuss light weight issues concerning mountain bikes & parts.

Moderator: Moderator Team

Post Reply
Attermann
Posts: 916
Joined: Sun Jan 05, 2014 11:04 pm
Location: Denmark

by Attermann

I'm about to mount a Sram S2200 short spindle on my PF30 73 mm wide focus raven, right now it has two 5 mm spacers, one on each side, but's that not nearly enough, what spacers do i need for this setup? Srams manuals are pretty much rubbish on that point, i hope you can help.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



grover
Posts: 1302
Joined: Mon Jul 26, 2004 1:06 pm

by grover

pretty sure the short spindle crankset use a 9.11mm spacer on the driveside. long spindle uses 15.45mm.

non drive side it's probably just the threaded bearing preload assembly. the long spindle crankset uses that and a 5mm spacer.

the 2.5mm spacers are for use if your shell was 68mm wide. don't use them if your shell is 73mm wide.

Attermann
Posts: 916
Joined: Sun Jan 05, 2014 11:04 pm
Location: Denmark

by Attermann

Thank you very much, just what I needed!

Post Reply