XX1 (10-42) Cassette with XTR Deraillieur

Discuss light weight issues concerning mountain bikes & parts.

Moderator: Moderator Team

User avatar
maddog 2
Posts: 348
Joined: Wed Feb 25, 2009 7:58 pm
Location: Lancaster, UK

by maddog 2

sounds like the problem is the XD driver, to me.

It's (somehow) sitting too far inboard. Is it the correct XD driver for that hub?

[I run a number of Sram 10-42 cassettes with XT and XTR mechs, no problem]

The issue isn't the mech, the issue is the cassette is too far inboard, which is therefore a XD driver issue as the Sram cassette only fixes on in one way i.e. no spacers or anything.

Posts: 31
Joined: Wed Mar 19, 2008 8:38 pm

by egebhardt

I'm sold. I'll be trying this soon. I've got all the parts but haven't pulled the trigger yet.
Eric in San Carlos, CA

User avatar
Posts: 185
Joined: Thu Mar 31, 2016 9:54 pm


Just an update on this one, I ended up going with an XTR cassette with the OneUp 45T conversion kit and using a 34T chainring (which I had anyway). Worked flawlessly out of the box, only needed 2 clicks on the barrel adjuster to get it dialed.

I still have the cassette sitting there waiting until I have enough time to muck around with it but for now I'm just enjoying riding the bike. Ill update this thread with a solution once i get to it just in case someone finds this and has the same issue!

Post Reply
  • Similar Topics
    Last post