Fox 32 FLOAT 29 100 FIT CTD - change float fluid in air cham

Discuss light weight issues concerning mountain bikes & parts.

Moderator: Moderator Team

Post Reply
User avatar
Posts: 124
Joined: Fri Aug 12, 2005 12:36 pm
Location: Denmark

by ebsilon

Hello All :D

Do any of you guys know how to perform the change float fluid in air chamber on a Factory Series 32 FLOAT 29 100 FIT CTD.

I have been searching the for help but did not succeed.



Speed of Lite

Posts: 69
Joined: Wed Feb 22, 2012 6:56 pm

by Jepas

Release all the pressure at the valve and unscrew the nut. This gives you access to the air (spring) chamber at the top. Usually there is a minimal ammount of oil to lubricate the piston seals, 20 to 30ml of 10Wt oil according to Fox.

If you turn the fork upside down, the remaining oil will come out, just add with fresh one after that.

by Weenie

Posts: 1037
Joined: Fri May 02, 2008 5:39 pm
Location: Here, there and everywhere

by DanW

There is a good summary video here:

Post Reply
  • Similar Topics
    Last post