front DuraAce derailleur won't fit, other suggestions?

Discuss light weight issues concerning mountain bikes & parts.

Moderator: Moderator Team

Post Reply
Dennis
Posts: 729
Joined: Sat Nov 06, 2004 1:31 am
Location: Belgium

by Dennis

When trying to mount a DuraAce front derailleur with a custom carbon clamp, I noticed that the size between the mountbolt and undersite cage is 1cm smaller then for instance my Sram Red on a other bike. Because of this the carbon clamp needs to be mounted to low, wich isn't possible because the seattube flairs out on the underside. Any suggestions on a light braze-on derailleur with a lower cage. I didn't like the Sram Red btw.
Anyone nows if the Frm front derailleur has a longer swingarm? Anyone els had such a problem?

Thanks

keebo
Posts: 7
Joined: Sat Oct 01, 2011 9:48 pm
Location: North West UK

by keebo

Hi read your post a couple of times can't picture what
you need, maybe a picture of where you can get it fixed
on (with it in there wrong place)
I have a band on with braze on attachment for braze on
Front Mech on a Tarmac.
Specialized S-Works SL3 Team Geo Super Light
Enve 3.4 tubular, 7800 SRM, 7800 group, 7900
front mech

limba
Posts: 956
Joined: Tue Dec 16, 2003 4:24 am

by limba

You know the new RED front has been completely redesigned? Maybe you would like the new one? If you tell everyone the bike you're using and exactly what the problem is someone will be able to help.

Dennis
Posts: 729
Joined: Sat Nov 06, 2004 1:31 am
Location: Belgium

by Dennis

Sorry, I will be a little more specific. I'm building up a Scott Scale 29er Rc frame. On my previous Scale 26 inch frame I could mount the Sram red so that the cage is 2mm above the big ring. Whit the Duraace this isn't possible because this derailleurs swingarm seems alot shorter + I use a smaller big ring (38 in stead of 42). Therefore I need to mount the braze-on adapter to low on the seattube.

I probably going to try the Frm fd-m zx front derailleur. This is supposed for smaller rings.

thisisatest
Shop Owner
Posts: 1980
Joined: Sat Jun 13, 2009 4:02 am
Location: NoVA/DC

by thisisatest

If you skip the carbon clamp, you can use the dura ace derailleur. some braze adapters have long slots like an actual braze on, instead of a single mounting hole. This would give you the range you need.

User avatar
yourdaguy
Posts: 2206
Joined: Thu Mar 17, 2005 3:25 am
Location: Southern Indiana USA
Contact:

by yourdaguy

You know there are top swing and bottom swing derailleurs and different frames are designed for the different types. You need to look up the specs for your frame and see which you need. My guess is that you have the wrong type.

There are basically two types of swing and two types of pull (top pull and bottom pull) Most Shimano der's can function as top pull or bottom pull but you still have to get the correct swing type.
For certain parts stiffer is more important than lighter.

Dennis
Posts: 729
Joined: Sat Nov 06, 2004 1:31 am
Location: Belgium

by Dennis

I'm shure I need a downswing, but still I need to mount the braze-on adapter to low. I'm going to order the Frm derailleur. I know a guy that used this with the carbon clamp. I will let you know how good the Frm actualy is.

bmCube
Posts: 41
Joined: Wed Jan 05, 2011 8:37 pm

by bmCube

FRM front derailleur is pretty good! I use them on a 36-22 setup with no issues at all. Cage is 2mm above the big chainring and still clears the chainstay. :wink:

Dennis
Posts: 729
Joined: Sat Nov 06, 2004 1:31 am
Location: Belgium

by Dennis

Great news! Thanks, I hope my Frm will arrive next week.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post