Anyone have the Bar Fly 2.0 and know how close to the stem face plate an Edge 500 sits? From this picture, it looks close (which I like). Unlike the 1.1, the unit sits below the stem which is cool too.

http://brimages.bikeboardmedia.netdna-c ... ly-2-0.jpg" onclick="window.open(this.href);return false;

_________________
http://ddubcustomsportswear.com

Here's mine, looks to be approx. 3mm.



This thing is super sturdy, holds the 500 tight, and the price was right - $23.74 shipped from Ebay (US).

yea close is dope.

_________________
Nate ★ Life , my tumblr joint
Instagramz

I must say, 3T finally released the Integra Team Edition aluminum mount with Garmin adapter. It is only available in 110mm now, but I'm real pleased with it so far.

If you buy from 3T directly, they include the Garmin mount, all shipped worldwide for $195. Oddly it matches my Scott Foil Team edition black/red exactly. Very striking.

Do you have A picture or a link ?

Pics got whacked on hosting site..sorry.

This is weight weenies. Nobody is going to comment on the weight of that thing?

True...that chunk of carbon below the unit looks heavier than any mount out there...

_________________
Trek Mad-one 7 Series team colours http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=115500&start=15

Weight is exactly the reason I didn't get it, and it looks like a walrus.

_________________
My 09 DiS2
My 10 Vigorelli
My 09 Kilo

Somewhere between 15mm and 20mm

And keeps everything very neat.

Us sprinters need something bigger than the pencil stems. Yeah, it's a bit bulky, but whatever.

There is no alternative like this that is integrated on the market. Think the barfly type mounts that try to be like SRM bother my OCD with the imbalanced appearance. Like an after thought.

Cavendish, Greipel, Sagan, etc. seem to be doing OK on the pencil stems. . . Just sayin'

how many watts u droppin' brah

_________________
Nate ★ Life , my tumblr joint
Instagramz

Thanks Steno. I decided to go with the Far and Near mount, it appears as though I may be able to mount the 500 almost flush with the face plate. I'll post some pics when it arrives.

_________________
http://ddubcustomsportswear.com

Ok, so I've had 3 Barfly 1.0's when they came out. They were ok, but a very tight fit and no positive engagement or "click" in the perfect spot. Always seemed to be adjusting it ever so slightly. But the biggest thing was that the tabs of a Garmin 500 Edge broke off and were wedged into the tight fitting mount. Can't say for sure if the mount is too tight or the tabs on the head unit are too weak. In any case, Garmin charges $80 to fix it (and what can ya do at that point).

So I tried the Garmin mounts. Very nice construction and I like the finish and texture of the material best of all the other units out there and it mounts very nicely. However, when the head unit is in the mount, although it has a nice positive and not overly tight engagement, the unit itself is slightly skewed to the left. Has anyone else noticed this? I've had three units, on three different bikes, and all the same thing. I contacted Garmin yesterday and the response I got was less than satisfactory. All I wanted to do was make sure they were aware of this (I'm sure they are) and that future runs correct this slight misalignment. But they said there were no plans to fix it. Seems strange when you strive to have everything on your bike perfectly aligned then you get a computer head that is slightly misaligned. Not enough that I asked for my money back, but still... quite annoying. Friend of mine has the same unit with the exact same issue.

_________________
C59 Five Years Later
My Special Colnago EPQ
Trek Emonda SL