Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Sat Apr 30, 2016 12:23 pm

All times are UTC+01:00





Post new topic  Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Sun Jul 07, 2013 11:36 pm 
Offline

Joined: Sat Nov 14, 2009 4:41 am
Posts: 20
Really like how they feel but I get minor rubbing on non drive side .
Wheels sit slightly closer to that side and when I rand Scott they said it was normal and should not use 25mm tires
Is this correct ? anything I can do to remedy ? Should I just not worry about slight rubbing ?


Top
   
PostPosted: Sun Jul 07, 2013 11:40 pm 
Offline

Joined: Mon Nov 02, 2009 8:38 pm
Posts: 293
Is your wheel out of dish? Where is it rubbing? What rims are you using?

I've just put 25mm Veloflexes on my Addict R3 with 23mm wide rims and there's lots of clearance, enough that I was wondering if I might get a 28 in there.

_________________
Blog: http://thesetbackpost.com/


Top
   
PostPosted: Sun Jul 07, 2013 11:48 pm 
Offline

Joined: Mon Jun 13, 2011 12:54 am
Posts: 42
I've got a Conti GP4000s 25 on a 303 firecrest on the back and there's not much clearance, it might rub if the wheels or tires flex with hard efforts but the wheel is centered in the frame.


Top
   
PostPosted: Mon Jul 08, 2013 5:20 am 
Offline

Joined: Sun Jun 12, 2005 10:56 am
Posts: 2672
Location: New Zealand
To answer 1 part of this:
DO NOT RIDE IT WITH ANY RUBBING AT ALL!!!
^I'm not sure how to emphasize this enough....absolutely NO RUBBING IS ACCEPTABLE ......at all!!! You WILL (note will, not "may") damage your frame very quickly, and a repair here would be dodgy to say the least. Dish your wheel properly and try again or abandon the idea.

_________________
Updated: Racing again! Thought this was unlikely! Eventually, I may even have a decent race!
Edit: 2015: darn near won the best South Island series (got second in age
-group)..woo hoo Racy Theremery is back!!


Top
   
PostPosted: Mon Jul 08, 2013 6:52 am 
Offline

Joined: Sat Nov 14, 2009 4:41 am
Posts: 20
I've tried it on some Shimano R500 s and also my 2011 Fulcrum Zeros .
Both wheels sit slightly off centre away from drive side and Scott said because of flex from drive side it is normal .


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: Attermann, MSNbot Media, tabmaster and 37 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited