Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Wed May 04, 2016 10:17 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 271 posts ]  Go to page Previous 15 6 7 8 919 Next
Author Message
PostPosted: Sun Jun 09, 2013 8:58 pm 
Offline

Joined: Tue Feb 05, 2013 8:29 pm
Posts: 236
I get 9mm c-c and 14mm outside. Are you measuring the center of the holes or the outsides?

To make sure we're talking about the same thing, I have this exact stem:
Image

Edit: This was the the person two posts up, not the one directly above me.

For the one directly above, looks like we're within .5mm of each other. To get an exact measurement (that doesn't involve eyballing the centers), unscrew the bolts slightly and measure the outside of the bolt shafts. It should be around 14mm. Then measure the diameter of one bolt, which should be somewhere around 5mm. Subtract for an exact measurement. (Looks like we're measuring the same stem, but your calipers are better than mine, but you're eyeballing where the centers are.)


Top
   
PostPosted: Sun Jun 09, 2013 10:51 pm 
Offline

Joined: Thu Aug 16, 2012 1:22 pm
Posts: 124
Location: UK - Hertfordshire
Ah my stem is different although it does say 4 axis on it.....will post a photo tomorrow.

_________________
2012 Canyon Ultimate AL 8.0


Top
   
PostPosted: Mon Jun 10, 2013 2:50 am 
Offline

Joined: Wed Aug 11, 2010 7:52 am
Posts: 70
Can anyone recommend me a mount that can be mounted to a handlebar with sweep back? I have a MCFK road handlebar that has a sweep back of 5 degrees.


Top
   
PostPosted: Mon Jun 10, 2013 8:49 pm 
Offline

Joined: Thu Aug 16, 2012 1:22 pm
Posts: 124
Location: UK - Hertfordshire
sigismond0 wrote:
I get 9mm c-c and 14mm outside. Are you measuring the center of the holes or the outsides?

To make sure we're talking about the same thing, I have this exact stem:
Image

Edit: This was the the person two posts up, not the one directly above me.

For the one directly above, looks like we're within .5mm of each other. To get an exact measurement (that doesn't involve eyballing the centers), unscrew the bolts slightly and measure the outside of the bolt shafts. It should be around 14mm. Then measure the diameter of one bolt, which should be somewhere around 5mm. Subtract for an exact measurement. (Looks like we're measuring the same stem, but your calipers are better than mine, but you're eyeballing where the centers are.)




This is the stem I have - this isn't my exact stem but mine is the same as the one on this Canyon. If required I can post a photo of my exct stem with calipers measuring the space between bolts. Please let me know, thanks.

Image

_________________
2012 Canyon Ultimate AL 8.0


Top
   
PostPosted: Mon Jun 10, 2013 9:12 pm 
Offline

Joined: Tue Feb 05, 2013 8:29 pm
Posts: 236
Yeah, looks like you have the 4-Axis 44, which has a wider faceplate.


Top
   
PostPosted: Mon Jun 10, 2013 9:33 pm 
Offline

Joined: Mon Jun 10, 2013 9:28 pm
Posts: 10
k-edge mounts, nuff said

Support American made


Top
   
PostPosted: Mon Jun 10, 2013 10:09 pm 
Offline

Joined: Thu Aug 16, 2012 1:22 pm
Posts: 124
Location: UK - Hertfordshire
Screw that, I'd rather something European made not something from the gas guzzling u s of a! :P


Jokes aside, I do prefer tillquists mount to the k edge.

_________________
2012 Canyon Ultimate AL 8.0


Top
   
PostPosted: Mon Jun 24, 2013 3:42 pm 
Offline

Joined: Mon Jul 02, 2012 8:43 am
Posts: 46
http://www.bikeradar.com/news/article/t ... red-37625/


Top
   
PostPosted: Mon Jun 24, 2013 3:46 pm 
Offline
Resident master of GIF

Joined: Mon Jul 18, 2011 2:44 am
Posts: 2571
bought a tate labs 2.0 barfly. really sick piece. my only grip is that the bottom part of it is super bulky and interferes with right side cables. Doesn't cause binding and still aligns straight, it's just weird. But SUPER SOLID feeling. The click to engage the edge 500 is like massively sturdy.

_________________
Nate ★ Life , my tumblr joint
Instagramz


Top
   
PostPosted: Mon Jun 24, 2013 10:16 pm 
Offline

Joined: Thu May 23, 2013 9:22 am
Posts: 181
Location: Northampton, UK
I've also fitted a BarFly V2.0 this evening.

As above, interferes with cables ever so slightly, but puts the computer in a much better position IMHO.

CLICK

_________________
2016 Cannondale Super Six Evo (Non Hi-Mod) - DA9000- Rotor InPower - Cosmic Ultimates (6500g)
2012 Cervelo P2 - UDi2 6770 - Rotor 3D+ Power2Max - Zipp 900 Disc/808FC
2015 Genesis Equilibrium - U6800 - FSA SRM - WH6800


Top
   
PostPosted: Tue Jun 25, 2013 4:52 am 
Offline
User avatar

Joined: Sat Nov 14, 2009 6:30 am
Posts: 846
Location: So Cal
shinobiph wrote:
http://www.bikeradar.com/news/article/tate-labs-bar-fly-mtb-garmin-mount-to-be-offered-37625/" onclick="window.open(this.href);return false;


Nice!

I like my Garmin on my stem for my mountain bike...but using a 70mm stem...its too short to run the stock Garmin mount. I wonder if the new Bar Fly would allow me to center my 510 on the 70mm stem.

This is what I currently use:
Image

I would like to have the Garmin centered on the stem.


Top
   
PostPosted: Tue Jun 25, 2013 6:00 am 
Offline
User avatar

Joined: Mon Dec 21, 2009 6:00 am
Posts: 440
Location: Bay Area, CA
SRAM also has a MTB mount coming out


Top
   
PostPosted: Wed Jun 26, 2013 3:29 pm 
Offline
in the industry
User avatar

Joined: Fri Jan 23, 2004 6:31 pm
Posts: 348
xclemjustinx wrote:
k-edge mounts, nuff said

Support American made


But I moved to Europe :wink:

Honestly, I like the Garmin. It is matte black and matches the bike I use it on and I like that the clamp is lined in rubber so it wont slip and gouge up a set of $350 handlebars. Plus, I own a Garmin.

Tillquists mount looks nice, but he is clearly more into posting pics and blogs then making it for anyone.

K-Edge, alloy.... skip.

Some of the self-made offerings are nice but look like everyone else so whats the point?

I'll save more weight with a skewer or lighter tires/inner tubes (where grams matter).... I know, I know, this is WW (go drill some holes in your Garmin mount)

I'm waiting for a mahogany or bamboo one :idea: (not rly)

_________________
carbonLORD.com


Top
   
PostPosted: Wed Jun 26, 2013 4:40 pm 
Offline

Joined: Wed Sep 05, 2012 2:38 pm
Posts: 122
carbonLORD wrote:
Tillquists mount looks nice, but he is clearly more into posting pics and blogs then making it for anyone.


Yep, I've pretty much given up trying to find out when or if I can buy one.


Top
   
PostPosted: Fri Jun 28, 2013 1:09 am 
Offline

Joined: Fri Sep 11, 2009 9:23 pm
Posts: 57
Location: Fremont, CA
I recently picked up the SRAM QuickView because it was only $16.45 shipped on Amazon and tried it for the first time today. I think at that price I'm going to equip all of my bikes with it. It's 19g, subtract out the original 8g of the stock Garmin band mount and it adds 11g to my steed. . . It's molded plastic with hollow recesses underneath so I don't think you can get much weight out other than the bolt. To mount it I had to spread open the c clamp pretty wide but fortunately it didn't break. Bolt was torx which was annoying. . . but after using carbon paste and tightening it 1/4 past finger tight, it's not moving anytime soon.

Bonus was due to how thin the clamp was, it fit perfectly in between the two zipties on my Di2 satellite shifter.

I was weary of the aesthetics with it on because I like the handlebars with a clean front end, but I guess it will grow on me. Hey, now I can actually see the 3T logo on my stem :mrgreen: (that reminds me - I should scratch out the SRAM logo on this) The head unit fits snug and is harder to lock in, better than the stock mount so it's not going to accidentally rotate out. I don't have to look as far down to see the display which is the main reason I got this so the weight gain is worth it.

Image
Image
Image

With safety in mind I hope more companies come out with the sunglasses mounted head units so I wouldn't even have to look down. If it was in the $300 range I wouldn't hesitate. For $499 or $599 whatever it is now, I'll pass.

On a related note I was tired of being buzzed by stupid drivers all the time so I also got a cycling mirror (Bike Peddler Take a Look) and it is lifechanging. I may look like an old geezer but I don't have to turn my head to see behind me which keeps my head straight as it should be.

Image

_________________
My 09 DiS2
My 10 Vigorelli
My 09 Kilo


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 271 posts ]  Go to page Previous 15 6 7 8 919 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. FS: 3x K-Edge Garmin mounts *SOLD*

in For sale - Pictures are mandatory 22-3-13

emorydptt

0

148

Tue Apr 19, 2016 11:06 pm

emorydptt View the latest post

There are no new unread posts for this topic. Attachment(s) Out Front Mounts?

in Road

aham23

14

1419

Fri Apr 01, 2016 1:09 pm

GeniuSH View the latest post

There are no new unread posts for this topic. Garmin out front mount

in Road

SuperflyRick

5

1080

Sun Jun 14, 2015 10:45 am

isharamet View the latest post

There are no new unread posts for this topic. Out in front mount for Garmin Edge 810

in Cycle Chat

racersir

12

586

Wed Feb 03, 2016 8:01 pm

racersir View the latest post

There are no new unread posts for this topic. Stems, comp mounts, posts- 3T, Easton, Zipp, Bontrager, Deda

in For sale - Pictures are mandatory 22-3-13

KWalker

0

383

Thu Jan 28, 2016 2:04 am

KWalker View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: burglarboycie, miklm, Sacke and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited