Scott Foil 30 size M
Moderators: MrCurrieinahurry, maxim809, Moderator Team
-
- Posts: 139
- Joined: Sun Jan 22, 2012 2:47 pm
Hi,
just got my new bike Foil 30, and the weigth was out of the box 7600gr. I'm going to take parts of my old bike (RedBull) and hoping to get it under 7kg! I fell in love to this colour, and that's the reason I settled to little extra weigth in HMF, instead of HMX carbon fork and frame.
The frame with only rd hanger was 1013gr, and the uncut fork was 375gr
just got my new bike Foil 30, and the weigth was out of the box 7600gr. I'm going to take parts of my old bike (RedBull) and hoping to get it under 7kg! I fell in love to this colour, and that's the reason I settled to little extra weigth in HMF, instead of HMX carbon fork and frame.
The frame with only rd hanger was 1013gr, and the uncut fork was 375gr
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 139
- Joined: Sun Jan 22, 2012 2:47 pm
Ok, after some modifications, this is what I ended up. Wheels are 50mm carbon clinchers from china, with mac aero spokes and Sokin hubs. shifters are Red and force, cranks are Campagnolo Centaur and so on... Total weigth as pictured, with two bottle cages, pedals and garmin 500 is 6930gr. Not bad with cheap carbon clinchers..
Sorry about crappy picture. Weather has been like this for few weeks and there is no ligth available.
Sorry about crappy picture. Weather has been like this for few weeks and there is no ligth available.
-
- Posts: 139
- Joined: Sun Jan 22, 2012 2:47 pm
I did play little with an extra seatpost. My aim was to make ligth, non setback seatpost for timetrial position, and I believe I did it. I just cut off the setback part and used some parts from my mtb seatpost. Much ligther than original and serves the purpose...
-
- Posts: 139
- Joined: Sun Jan 22, 2012 2:47 pm
It's Ritchey seatpost and weigths about 230 grams as a settback version original!
-
- Posts: 1163
- Joined: Sun May 16, 2010 7:28 pm
Who signed your generic carbon clinchers?
Also -10 points for photo in the small ring.
Also -10 points for photo in the small ring.
-
- Posts: 3
- Joined: Sat Jun 29, 2013 7:20 am
- Location: Austria (Europe)
Hi.
Is this the original foil seatpost? Is it possible to cut off the Carbon post that way? It looks like an intersting option for me to safe €250,- for a new zero seatpost.
Is this the original foil seatpost? Is it possible to cut off the Carbon post that way? It looks like an intersting option for me to safe €250,- for a new zero seatpost.
-
- Posts: 139
- Joined: Sun Jan 22, 2012 2:47 pm
Is there difference with the seatpost on HMF and HMX frames? I would be suprised if there is. Does anybody have actual weigth of HMX frame in size L (56)
You wrote size M and show a L. Very nice bike!
Can you come up with some measurements? Center of box to top saddle like you have it on the last pic. Tip nose to center of bar. Bar to saddle drop. I am thinking about the same bike, but dont know if I should go L og XL.
Can you come up with some measurements? Center of box to top saddle like you have it on the last pic. Tip nose to center of bar. Bar to saddle drop. I am thinking about the same bike, but dont know if I should go L og XL.
-
- Posts: 139
- Joined: Sun Jan 22, 2012 2:47 pm
My mistake... The frame is L. Saddle high is 770mm, 560mm from nose to the senter of the bar, 120mm bar drop.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com