Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Thu Aug 25, 2016 11:07 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Mon May 27, 2013 3:56 am 
Offline

Joined: Mon Jan 16, 2012 3:05 am
Posts: 12
Depending on how you look at it I was either very lucky or very unlucky. I had just finished decending 6500 ft and was braking to a stop at my vehicle when I heard a cracking sound and my front wheel skidded to a stop. I had almost stopped when it happened so I didn't go down. My front wheel was badly out of true and rubbing on the brake pads. The hub flange had cracked off expelling three spokes! The 20 hole m5 hub was laced to an edge 25 carbon rim. When i got home I carefully loosened all the remaining spokes a little at a time around the rim until I had removed all the spokes. Can I reuse the spokes and rim? It's hard to tell but the spokes seem fine and the rim lays on a flat table with maybe a 1mm gap on one side of the rim.( the table may not be that flat)

I am new to building wheels and would probably have my local shop lace them up with a new hub if that is possible. Since I want to reuse the spokes the new hub must have a similar dimension to the broken M5 hub. I have measured the m5 hub and come up with these measurements. Hub flange diameter 30mm and outside of flange to outside of flange 75 mm or hub center to outside of flange 37.5 mm

Extralight ultrafront sx hub has the following dimensions : flange diameter 29mm center to flange 38mm. Do you think this hub would be a drop in replacement for the m5? Fairwheel bikes is out of stock on the hub does anyone know another US retailer of these hubs?

Am I silly to want to reuse the rim and spokes? the rim and spokes have less than 100 km and are almost brand new.

Disappointed to have broken my wheel but so happy it didn't happen while i was doing 40 mph getting ready to enter a tight curve.


Top
   
PostPosted: Mon May 27, 2013 7:18 am 
Offline
User avatar

Joined: Sun Jun 12, 2005 10:56 am
Posts: 2673
Location: New Zealand
I'd re-use the rim and spokes quite happily.....how close is an AC hub? (Micro).......they are about 52g but nothing is as light as your M5 unless you go for a DASH hub. Dash Mira (flanged....you'd have to contact Weston Snyder and see if he'd do you one) are about 30g.

_________________
Updated: Racing again! Thought this was unlikely! Eventually, I may even have a decent race!
Edit: 2015: darn near won the best South Island series (got second in age
-group)..woo hoo Racy Theremery is back!!


Top
   
PostPosted: Mon May 27, 2013 8:36 am 
Offline
User avatar

Joined: Tue Aug 08, 2006 1:41 pm
Posts: 853
Location: The Netherlands
Why not get a new M5 hub? As far as I know these hubs don't have a reputation for falling apart very often.

_________________
My Renovo R1 wooden bike project and the reason for my passion for all that is wood.

Check it out: the most amazing vintage Colnago, Merckx and Pinarello collection


Top
   
PostPosted: Mon May 27, 2013 6:12 pm 
Offline

Joined: Mon Jan 16, 2012 3:05 am
Posts: 12
I guess I'm not a true weight weenie, I will add 20 grams to my bike not to have a catastrophic front hub failure. Also the bearings and service from m5 don't seem up to snuff. Can one even order m5 front hubs right now? I did a quick online search and couldn't find one.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 4 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Are my hairline cracked or broken carbon fibre handlebars broken or useable? Can they be easily repaired?

in Road

ponyopo

8

758

Sat Jul 30, 2016 5:56 am

mpulsiv View the latest post

There are no new unread posts for this topic. Attachment(s) Broken frame

in Road

Timmy269

8

1291

Fri Oct 09, 2015 8:57 pm

Berk View the latest post

There are no new unread posts for this topic. Attachment(s) Rotor 3D+ broken crank

[ Go to page: 1 2 3 4 5 ]

in Road

maquisard

68

5547

Thu Nov 12, 2015 8:45 pm

maquisard View the latest post

There are no new unread posts for this topic. Broken steerer tube - result of a crash or not?

in Road

mrlobber

10

917

Mon Sep 07, 2015 9:23 am

mrgray View the latest post

There are no new unread posts for this topic. Has anyone broken a 2015 Super Record rear derailleur yet?

[ Go to page: 1 2 3 ]

in Road

skidmark

42

3654

Sat Dec 26, 2015 12:13 am

Bridgeman View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: blueturtle, ck44, fitty4 and 25 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited