Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Sat Jul 02, 2016 8:34 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Thu May 23, 2013 11:21 am 
Offline

Joined: Wed Sep 05, 2012 2:38 pm
Posts: 125
I'm looking to move onto a new frame and wondered what experience people had of the following consideration...

I currently ride a 56cm Trek 1.7 and am looking at Cannondale Supersix Evos. I'm going to go and get my leg over one in a shop before actually buying, but from looking at the geometries and tube lengths, the 56 Cannondale will be v. similar to my 56cm Trek, but with a lower headtube (which is what I want). However, I think I could get myself easily onto a 54 if I used a longer stem and laid my seat back slightly more.

Has anyone weighed the difference of offsetting a smaller frame against a longer stem and more seatpost left un-cut? Calculations I've made make me think the smaller frame will always translate into a lighter overall bike..?


Top
   
PostPosted: Thu May 23, 2013 3:52 pm 
Offline

Joined: Mon Jul 18, 2011 4:37 pm
Posts: 158
573 wrote:
...but from looking at the geometries and tube lengths, the 56 Cannondale will be v. similar to my 56cm Trek, but with a lower headtube (which is what I want). However, I think I could get myself easily onto a 54 if I used a longer stem and laid my seat back slightly more...


I can't tell you if the 54cm Cannondale will fit you, but do not go moving your saddle around to correct your reach on the bike. As a general rule you need to set saddle height and setback first. These measurements should be based on your relationship to the bottom bracket. Then worry about where your hands fall. The difference between a 54 and 56 TT lengths can be made up with a 20mm stem increase, i.e. 100mm to 120mm. The stack height can be changed with spacers and stem angle. If a couple of CM's of spacers don't get your hands high enough you need to stick to the larger frame size.

The smaller frame will probably be slightly lighter, but discomfort affects your ride far more than a few extra grams ever will. Get the size right first, then try to save weight.


Top
   
PostPosted: Thu May 23, 2013 4:02 pm 
Offline

Joined: Wed Sep 05, 2012 2:38 pm
Posts: 125
Thanks. I appreciate the importance of comfort over weight and wouldn't compromise fit to save a few grams. Part of the change of frame is to get lower at the front and a 54 should give me more scope to do that.


Top
   
PostPosted: Fri May 24, 2013 3:06 am 
Offline

Joined: Fri Feb 17, 2012 5:33 pm
Posts: 46
Location: Louisiana USA
573 wrote:
Part of the change of frame is to get lower at the front and a 54 should give me more scope to do that.


They still make -17 degree stems (you can flip a +20 degree also for more neg gain, you can find track and mtb stems light and bomb proof) and as xjbaylor mentioned, the relationship of your knee over the pedal should not be monkeyed with.
However I have a 57 cm EV3 and a 59 cm Dolomiti (both Bianchi). They are totally different setups, one is a straight up race bike and the other is my "Rivendell crowd" bike. I have carefully set them up to have the same geometry between the contact points, without a bit of trouble, because really there's a net difference of only 10 cm; they both have the same seat tube angle, but the Dolomiti has a 1 degree slacker head tube, which effectively shortens the top tube. The EV3 has a 120 with a 10 cm spacer and the Dolomiti has a 110 slammed (well I have a 2 cm washer in there to make it look right). I'm 6'0" 182 cm with an 84 cm inseam.

Hope this helps.


Top
   
PostPosted: Fri May 24, 2013 10:05 am 
Offline

Joined: Fri Oct 28, 2011 3:25 am
Posts: 1295
Location: United Kingdom of Great Britain and Northern Ireland
573 wrote:
I think I could get myself easily onto a 54 if I used a longer stem and laid my seat back slightly more.


In the case of 2cm incrament frames it is often the case that two sizes could fit the same person. A longer headtube, slammed stem type of fit. Or a fit with a higher saddle and a couple of headset spacers.

My point being ... Let 'fit' be your guide and not 'weight'.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Attachment(s) Crank sizes

[ Go to page: 1 2 ]

in Road

Lewski33

19

1093

Tue Oct 13, 2015 11:41 pm

rmerka View the latest post

There are no new unread posts for this topic. Lake shoe sizes

in Road

Lewski33

9

778

Mon Jun 13, 2016 8:28 pm

MattSoutherden View the latest post

There are no new unread posts for this topic. Help estimate my frame weight

in Road

rms13

2

220

Mon Mar 21, 2016 5:14 pm

rms13 View the latest post

There are no new unread posts for this topic. Supersix Hi Mod frame weight

in Road

Simon430

10

1156

Sat Jul 11, 2015 4:41 pm

em3 View the latest post

There are no new unread posts for this topic. Felt Ar 3 or 5 Frame Weight?

in Road

szcyclist

4

372

Thu Jan 07, 2016 12:24 am

Alexvpaq View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: abrown3mtg, Baidu [Spider], Bing [Bot], Exabot [Bot], MSNbot Media, Yahoo [Bot] and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited