Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Fri Oct 21, 2016 2:24 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062

All times are UTC+01:00

Post new topic  Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Wed May 22, 2013 9:46 am 

Joined: Mon Aug 06, 2007 1:22 am
Posts: 167
Excuse the carbon paranoia here...

Was installing a set of di2 shifters into these bars. Since the clamp mounting surface has that rough sand-paper like coating, I didn't use any carbon assembly paste.

Put everything together and start tightening the clamps. I would tighten it finger tight, and then try rotating the shifters. If they still moved, I would tighten some more - each time a tiny bit incrementally.

After not all that much torque and with the shifters still moving if I twisted them hard enough, I tighten it a bit more and I heard a "crack" sound come from the bar.

So I take everything apart, inspected with a flashlight and magnifying glass and could not find a crack or scratch on the bar. Put everything back together. Grab both sides of the bars and try to flex them as hard as I could. No creaks, no sounds. Put the front wheel between my ankles, grab the bar ends and tried twisting it from side to side. Nothing.

What does everyone suggest? Put some miles on it and see if anything turns up? Or toss them (brand new bars :( ) and not risk it?

How strong are these bars anyways? for those of you who have actually cracked a handlebar by overtightening the shifter clamps - how hard were you tightening them before something broke?

thanks in advance

Posted: Wed May 22, 2013 9:46 am 

PostPosted: Wed May 22, 2013 10:27 am 
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
1. I've tightened lever clamps pretty hard before on many, many 3t bars and have had no failures.
2. Sometimes the T-bolt at the lever clamp is turned from the clamp itself and will slide into place after a lot of torque is applied, making a "pop" or "crack" sound. It's definitely a different sound than carbon cracking, but I wouldn't be surprised if one mistook it for that.
3. Use grip paste no matter what.

PostPosted: Wed May 22, 2013 3:27 pm 

Joined: Fri Nov 14, 2008 4:55 am
Posts: 600
Use a torque wrench!!

Carbon paste for sure but especially if you are using the LTD bars use a torque wrench. Yes carbon can generally take quite a bit of force but the tolerances with the LTD plastic are pretty refined. It's easier to go past 5 or 7nm than you realize.

I would agree the ti bolts can ping and make noise as well while tightening if you have those.

Just ride ..

PostPosted: Thu May 23, 2013 3:13 am 

Joined: Fri Dec 14, 2012 4:17 am
Posts: 66
I too would recommend use of a torque wrench for installation of carbon parts.

A respectable torque wrench can be had for ~100 USD new. A fraction of what 3T Ltd bars cost.

Sent from my iPad using Tapatalk HD

My Bikes

Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 4 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. eebrakes installation issue

in Road




Thu May 12, 2016 4:26 pm

jrmynthn View the latest post

There are no new unread posts for this topic. Colnago Headset Installation Please HELP

in Road




Wed Jul 13, 2016 8:38 am

pdiomidis View the latest post

There are no new unread posts for this topic. sigma out front mount installation..

in Road




Tue Mar 15, 2016 2:54 pm

addict View the latest post

There are no new unread posts for this topic. Specialized Allez Race crank installation.

in Road




Wed Jan 27, 2016 7:50 pm

CrankAddictsRich View the latest post

There are no new unread posts for this topic. Garmin Varia radar - installation on saddle bag

in Road




Tue Jul 05, 2016 6:59 am

mattr View the latest post

All times are UTC+01:00

Who is online

Users browsing this forum: 4ster, Bing [Bot], crn, Matt28NJ, RippedUp and 28 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited