Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Fri Jul 29, 2016 1:17 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Tune Mag 170 disassembly
PostPosted: Thu May 16, 2013 1:04 pm 
Offline

Joined: Thu Feb 21, 2013 11:53 pm
Posts: 4
Can anyone make any sense of the Tune MAG 170 instructions regarding adjusting play with shims?

From what I can tell, you need to measure the protruding axle length on the drive side from the outer bearing recessed in the freehub. Then the instructions say make sure the end cap plus shims is no more or less than 0.2 (aardvarks? I assume mm).

1.I'm not sure quite what that means

2.The axle is so tight in the bearings I'm not sure how to ensure all the 'play' is at the drive end

3.What sort of device do you need to measure? Most regular calipers I've seen wouldn't measure inside the recess of the end cap or the freehub.



Thanks


Top
   
PostPosted: Thu May 16, 2013 4:31 pm 
Offline
Shop Owner
User avatar

Joined: Sun Feb 06, 2005 4:22 pm
Posts: 3669
Location: Tucson, Az.
An easier way to do it, is to just clamp the wheel tightly into a truing stand with a skewer and check the amount of play. If there is any binding in the freehub body or axle, remove a spacer and re-check.

_________________
Fair Wheel Bikes

Fair Wheel Blog

Instagram


Top
   
PostPosted: Thu May 16, 2013 4:38 pm 
Offline

Joined: Thu Feb 21, 2013 11:53 pm
Posts: 4
madcow wrote:
An easier way to do it, is to just clamp the wheel tightly into a truing stand with a skewer and check the amount of play. If there is any binding in the freehub body or axle, remove a spacer and re-check.


Aha, thanks. That sounds like my kind of solution :thumbup:


Top
   
PostPosted: Thu May 16, 2013 6:06 pm 
Offline

Joined: Sat Apr 18, 2009 8:59 am
Posts: 738
Location: Surrey UK
I've noticed that the end cup can go loose as a result of changing the wheels.
First when I found a small play in the hub, I removed the cup end, spacers, re-assembled, no play.
Second time I just made sure that the end cup is seated properly by few gently taps.

_________________
Cervelo R5 VWD 5637g/12.43lb
Pronghorn XC SW Race 8284g/18.26lb


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 4 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Tune Mag 180 from 10 to 11V Shimano

in Road

alasamerlin

1

320

Sat Sep 26, 2015 11:23 pm

androidavies View the latest post

There are no new unread posts for this topic. Tune wassertr├Ąger 2.0

in Road

mariovalentim

13

1723

Wed Mar 02, 2016 2:31 am

RyanH View the latest post

There are no new unread posts for this topic. HED Jet with Tune Hubs from Planet X?

in Road

cccycle

3

1020

Fri Oct 30, 2015 11:11 pm

Jmdesignz2 View the latest post

There are no new unread posts for this topic. Tune stem, why spacer on top?

in Road

Canofale

10

641

Sat Apr 30, 2016 4:58 am

Canofale View the latest post

There are no new unread posts for this topic. Tune Mag conversion 10 to 11s advice

in Road

1415chris

7

233

Mon Mar 14, 2016 7:20 pm

madcow View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: 5DII, Baidu [Spider], MSNbot Media, prebsy, simnorm and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited