Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Sat Jul 30, 2016 8:40 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 111 posts ]  Go to page Previous 14 5 6 7 8 Next
Author Message
PostPosted: Sat Jun 11, 2011 1:24 pm 
Offline

Joined: Sat Jan 06, 2007 9:47 pm
Posts: 3553
Location: Pittsburgh
Why don't they hold CO2 well?

_________________
RUEGAMER 5.21kg, 11.48lbs

CRUMPTON 4.40kg, 9.70lbs


Top
   
PostPosted: Sat Jun 11, 2011 1:31 pm 
Offline
User avatar

Joined: Wed May 18, 2005 6:24 pm
Posts: 4438
Location: BELGIUM
CO2 permeates through latex a lot quicker.


Top
   
PostPosted: Tue Jan 08, 2013 6:37 am 
Offline

Joined: Tue May 20, 2008 5:34 am
Posts: 80
I added Stan's Notubes sealant to my Vittoria Open Corsa tubulars per the recommended amount (50-60 mL). I know this is added weight and increases rotational weight, but considering some of the roads I will use these on for training/racing, it's a good idea.

It seems as if 50-60 mL might be overkill for 700x23c tubular tires. Is this was people have used in past? Just curious what other opinions are. Thanks!

-Pete


Top
   
PostPosted: Tue Jan 08, 2013 7:17 am 
Offline

Joined: Sun Jul 17, 2011 6:34 am
Posts: 213
I only use Stan's sealant to fix a tubular (700x22) puncture after it has occurred.
    - Pinhole leaks typically only need 20-30 ml.
    - 1-2mm leaks typically need more, maybe 50-60 ml.


Top
   
PostPosted: Tue Jan 08, 2013 7:24 am 
Offline

Joined: Tue May 20, 2008 5:34 am
Posts: 80
Sounds like a good amount for repairs, but I'm using sealant ahead of time to be there if I need it during a ride.


Top
   
PostPosted: Tue Jan 08, 2013 4:27 pm 
Offline
Tubbie Guru

Joined: Tue May 03, 2005 2:20 am
Posts: 5848
Location: Belgium
Hi,

It will only be effective (if at all) for the first couple of months. After that it'll be just dead weight.

Keep in mind as well that you'll need to keep that tyre inflated and in service (as in keeping it rollng) if you don't want a lump of cured latex at the lowest point of the unused tyre or, even worse, an inner tube stuck together internally with solidified latex....

Ciao, ;)

_________________
Being a snob is an expensive hobby.


Top
   
PostPosted: Wed Jan 09, 2013 5:45 am 
Offline

Joined: Tue Jun 07, 2011 4:28 am
Posts: 118
Location: Berkeley, CA
I have had Caffélatex sealant in a pair of tubulars for about 16 months now (I should ride them more I know) and much to my surprise it is still very much liquid. I have no experience with the Stan's, but the Caffélatex stuff seems to stay liquid for quite a while. :noidea:


Top
   
PostPosted: Wed Jan 09, 2013 7:29 am 
Offline

Joined: Fri Oct 05, 2012 3:52 am
Posts: 588
I used Stan's to seal a fairly large puncture caused by a Sheetrock screw in a Conti GP4000. It's right at the peak of the tread too and I didn't think it would even seal initially. Well, it sealed and is still going and will hold 90-100psi for weeks at a time between being used.

Personally love the stuff.

_________________
"I blame Obama and the ViAS"


Top
   
PostPosted: Thu May 09, 2013 6:21 am 
Offline

Joined: Tue Jun 19, 2012 7:17 am
Posts: 6
I purchased 240ml of Continental Revo Sealant. I plan to use it on Hutchinson Fusion 3 23mm Tubless tires as advance puncture prevention. There is a trade off between weight and puncture repair ability. Also the less volume the tire the less Sealant required. What range of tire sealant is recommended for this sealant and tire combination?


Top
   
PostPosted: Fri May 10, 2013 10:38 am 
Offline
User avatar

Joined: Sat Jun 19, 2010 8:21 pm
Posts: 444
Location: Zürich, Switzerland
I think a good tubular should not be ruined with sealant.

Better is to carry an spare tubular for training, purposes, or probably train on lower end tubulars with sealant inside ( like vittoria Rallys for example )

once the tubular is puctured it is better to attempt a repair at home, than to fill it with sealant just to get home.

_________________
Hucken The Fard Up !
Colnagos : C50 ST01 - Master 30th AD10 - C40 Mapei WC


Top
   
PostPosted: Fri May 10, 2013 3:03 pm 
Offline

Joined: Sun Mar 27, 2011 8:16 pm
Posts: 443
It's very convenient to just fire half a can of Pitstop into the tyre though and carry on your way as though nothing has happened.

I run tubular Gatorskins on my commuting bike, both tyres punctured in the first week, I used PitStop on both, they now have 1,100 miles on them since- and no further flats.

I suspect that the sealant is attending to minor punctures as they occur- every now and again I notice that the pressure has dropped in one of the tyres which would lend credence to this theory.

The rear is looking a bit worn now- but I reckon there is some way to go before I have to replace it.


Top
   
PostPosted: Wed Jul 13, 2016 6:43 am 
Offline

Joined: Tue Aug 02, 2011 5:54 pm
Posts: 312
Bumping this thread again.

I am about to dip my feet into tubulars and need to pick a sealant for repairs (not preventative).

From reading the last seven pages, Vittoria Pit Stop, Tufo Extreme, and Stan's are the most common, with Pit Stop and Tufo working for some, but Stan's working for nearly everyone.

I'm not too keen on carrying the bulkier Pit Stop. Is there a compelling reason to go with Tufo Extreme over Stan's?

Thanks.


Top
   
PostPosted: Wed Jul 13, 2016 8:33 am 
Offline
User avatar

Joined: Thu Mar 24, 2011 6:06 pm
Posts: 613
I used Stans before, but have since switched to Orange based on positive reviews. Haven't had a chance to try it though as yet! A good option to consider though, as I haven't heard anything bad about it.

_________________
Trek Mad-one 7 Series team colours http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=115500&start=15


Top
   
PostPosted: Wed Jul 13, 2016 10:47 am 
Offline

Joined: Sun Jun 29, 2014 1:27 pm
Posts: 428
I've had 3 instances where Stan's failed to plug a flat tire, but all 3 cases the tire was already pretty heavily damaged. Conti Competitions (for me anyways) seem to lose a lot of tread just through normal riding, especially the rear, and just wears down to a point where failure is inevitable. Longest I've gotten out of a new tire is 1 year, shortest is just 2 months.

But for those 3 failures, Stans also saved me about 8 times. But it's enough to get me thinking about going back to clincher wheels just so I can swap a tube (or patch it) and keep riding. Such a bummer to have to cab it back home and have the rest of the ride wasted :(


Top
   
PostPosted: Wed Jul 13, 2016 10:59 am 
Offline

Joined: Sun May 25, 2014 4:57 am
Posts: 857
The e13 sealant has bigger chunks in it. May be a good alternative?

_________________
Using Tapatalk


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 111 posts ]  Go to page Previous 14 5 6 7 8 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. How to remove sealant from tubular tire?

in Road

wootenlakeguy

11

835

Sat Jan 02, 2016 1:19 pm

1415chris View the latest post

There are no new unread posts for this topic. Slime Pro Tubeless Sealant

in Road

Shmitt

3

276

Sun Jul 10, 2016 1:36 am

flashpunk View the latest post

There are no new unread posts for this topic. Carbon thread

[ Go to page: 1 2 3 4 ]

in Road

pitbull

46

5165

Wed Nov 25, 2015 1:05 am

mythical View the latest post

There are no new unread posts for this topic. WW competition thread?

in Road

xena

14

1765

Mon Jun 20, 2016 5:37 am

jonloh View the latest post

There are no new unread posts for this topic. Attachment(s) Another boring Supersix sizing thread. 48 or 50.

[ Go to page: 1 2 ]

in Road

nemeseri

25

2512

Mon Nov 23, 2015 8:28 pm

nemeseri View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot], Exabot [Bot] and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited