BB92 pressfit BB + spacer?

Discuss light weight issues concerning mountain bikes & parts.

Moderator: Moderator Team

Post Reply
User avatar
Mads Kock
Posts: 2767
Joined: Thu May 26, 2005 7:52 am
Location: Malmö, Sweden
Contact:

by Mads Kock

I have got a UniTi BB92 pressfit BB for my bike - it comes with a spacer. I have tried mounting it with the spacer but there seems to be some play.

Do any of you use spacers with your BB92 pressfit BB?

Thanks :-)

User avatar
eliflap-scalpel
Posts: 961
Joined: Sun May 25, 2008 10:12 pm
Location: italy
Contact:

by eliflap-scalpel

put other shims to eliminate play and don't care about others ....

ciao Mads :-)
http://eliflap.it/

by Weenie


User avatar
Mads Kock
Posts: 2767
Joined: Thu May 26, 2005 7:52 am
Location: Malmö, Sweden
Contact:

by Mads Kock

Other shims and don't care about others? Andrea - how many spacers are that? 2?

User avatar
eliflap-scalpel
Posts: 961
Joined: Sun May 25, 2008 10:12 pm
Location: italy
Contact:

by eliflap-scalpel

sorry ...i red you post but my brain red crank not BB .....

try the "gold paper" , thin copper film
http://eliflap.it/

User avatar
Mads Kock
Posts: 2767
Joined: Thu May 26, 2005 7:52 am
Location: Malmö, Sweden
Contact:

by Mads Kock

Got a standard bb92 from Sram that fits. Gonna have a talk with UniTi because the cup in the driveside was way to loose.

User avatar
crazyeddie
Posts: 79
Joined: Sun Jan 26, 2003 8:32 pm
Location: Saarbrücken/Germany
Contact:

by crazyeddie

you have to use the 2,5mm spacer on the drive side, if your bottom bracket shell is 89,5mm wide.

by Weenie


User avatar
Mads Kock
Posts: 2767
Joined: Thu May 26, 2005 7:52 am
Location: Malmö, Sweden
Contact:

by Mads Kock

Yes - used the spacer. I have located the problem to the cup in the driveside is too small. The Sram fits perfectly with no play but a bit heavier than the UniTi. I'm in contact with the shop so I hope for a good solution.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post