Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Fri May 27, 2016 3:25 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Sat May 04, 2013 12:59 am 
Offline

Joined: Sun Jan 06, 2013 8:44 am
Posts: 26
Hi all,

Stupid question but I am wondering if I can use Sram/FSa BB30 BB kits to install my Cannondale Hollowgram SL crank and spindle or I have to use the original Cannondale parts for my Caad10?

What I have; Left and right crank arms and the 104mm spindle.

From the Cannondaleexpert.com's site, I would need the shim, circlips, bearing shields & wave washer for the installation.

Thinking grabbing one set from lbs rather than waiting.

http://www.competitivecyclist.com/produ ... .19.1.html

comparing to these

http://www.cannondaleexperts.com/Bottom ... _c_18.html

Thank for answering my question in advance.


Top
   
PostPosted: Sat May 04, 2013 1:25 am 
Offline
User avatar

Joined: Fri Dec 11, 2009 10:38 pm
Posts: 1535
Location: Welland, Ontario
BB30 is a technical standard. It should not matter who makes the parts.

So, yes.

_________________
There's sometimes a buggy.
How many drivers does a buggy have?

One.

So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.

http://www.youtube.com/watch?v=GekiIMh4ZkM


Top
   
PostPosted: Sat May 04, 2013 7:56 am 
Offline
Shop Wrench

Joined: Sun Sep 05, 2010 9:31 am
Posts: 164
Location: Belgian border
Yes. Bearings, bearing shields, wavy washers and plastic spacers are all standard sizes. It will work.
Do you have the crank bolts and the tiny bolt washers?


Top
   
PostPosted: Sat May 04, 2013 3:40 pm 
Offline

Joined: Sun Jan 06, 2013 8:44 am
Posts: 26
bikerjulio wrote:
BB30 is a technical standard. It should not matter who makes the parts.

So, yes.


Thank you for confirming that.


Top
   
PostPosted: Sat May 04, 2013 3:42 pm 
Offline

Joined: Sun Jan 06, 2013 8:44 am
Posts: 26
roselend wrote:
Yes. Bearings, bearing shields, wavy washers and plastic spacers are all standard sizes. It will work.
Do you have the crank bolts and the tiny bolt washers?


I do have the crank bolts and bolt washers. They were bought used, can I still reuse the washers or I need to buy new as well?

Thank you for helping.


Top
   
PostPosted: Sat May 04, 2013 7:13 pm 
Offline
User avatar

Joined: Tue Feb 19, 2008 5:17 am
Posts: 614
Location: NZ
So does that mean I could ditch the spacers and wavy washer from my Hollowgram and use the preload spacer from the new Sram Red Exogram crank? I like the idea of being able to set preload using the Sram adjustable spacer.


Top
   
PostPosted: Sun May 05, 2013 12:04 am 
Offline
Shop Wrench

Joined: Sun Sep 05, 2010 9:31 am
Posts: 164
Location: Belgian border
You can reuse the washers.
No you can not use the SRAM preload adjuster on a hollowgram crank because the threads of that adjuster are on the non drive crank arm/spindle.

In my opinion the adjuster is no good because its sometimes moves, you can easily damage the 1 mm hex screw, and I've seen multiple SRAM cranks were the plastic threads come loose from the spindle.


Top
   
PostPosted: Sun May 05, 2013 12:31 am 
Offline

Joined: Sun Jan 06, 2013 8:44 am
Posts: 26
roselend wrote:
You can reuse the washers.
No you can not use the SRAM preload adjuster on a hollowgram crank because the threads of that adjuster are on the non drive crank arm/spindle.

In my opinion the adjuster is no good because its sometimes moves, you can easily damage the 1 mm hex screw, and I've seen multiple SRAM cranks were the plastic threads come loose from the spindle.


Sweet. Thank you Roselend!


Top
   
PostPosted: Sun May 05, 2013 12:51 am 
Offline
User avatar

Joined: Fri Dec 11, 2009 10:38 pm
Posts: 1535
Location: Welland, Ontario
My original answer was a little brief.

BB30 is really a dimensional standard for the BB area and crank spindle.

The accuracy of the machining, quality of bearings and materials, etc could still vary between manufacturers. And the method of adjustment.

And I suspect, the reason behind we see complaints about some BB30 systems.

_________________
There's sometimes a buggy.
How many drivers does a buggy have?

One.

So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.

http://www.youtube.com/watch?v=GekiIMh4ZkM


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 9 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. What bottom bracket do I have?

in Road

G6612

3

237

Thu May 05, 2016 8:58 pm

Calnago View the latest post

There are no new unread posts for this topic. Which GXP bottom bracket?

in Road

cnyn

8

451

Wed May 11, 2016 6:44 pm

topflightpro View the latest post

There are no new unread posts for this topic. bottom bracket tool

in Road

goldielox

11

668

Sat Feb 13, 2016 3:38 pm

BRM View the latest post

There are no new unread posts for this topic. Best BB386 : GXP bottom bracket ?

in Road

stormur

12

345

Wed May 18, 2016 8:49 am

micky View the latest post

There are no new unread posts for this topic. Reset Racing BSA bottom bracket

in Road

Stockie

3

582

Thu Jul 16, 2015 1:15 am

tinozee View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot] and 25 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited