This is my latest bike Merida time warp
Moderators: MrCurrieinahurry, maxim809, Moderator Team
-
- Posts: 165
- Joined: Mon Sep 01, 2008 5:07 pm
- Location: Zwaag Nederland
This is my updated timetrial bike for this spring. I replaced my old cannondale slice alu frame with this one and also a new crankset and a 3T bar. I only struggled with the cable routing, when the snow is gone I am going to testride it to see if everything fits.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 165
- Joined: Mon Sep 01, 2008 5:07 pm
- Location: Zwaag Nederland
these are my TT wheels for four years. I wand a closed rear wheel but I don`t like the feel of the wind blowing against it.
This is the first TT Merida in the forum I guess.
Very nice.
Im not the most expert one, but isnt the front derailleur cable doing a wrong route on the steer tube?
Very nice.
Im not the most expert one, but isnt the front derailleur cable doing a wrong route on the steer tube?
-
- Posts: 165
- Joined: Mon Sep 01, 2008 5:07 pm
- Location: Zwaag Nederland
I`ve tried several cable routings but none of them works maybe because it is not a complete intergrated TT bar. I wanted the cable routing trough the bar to my shifter. If i change my shiftcables to front right and rear left the routing is better but then it is difficult to remember witch shifts what.
And I am going to try this setup first on the road then all is differend. after that I make a deccision.
And I am going to try this setup first on the road then all is differend. after that I make a deccision.
WOW.
That is stunning!
That is stunning!
-
- Posts: 165
- Joined: Mon Sep 01, 2008 5:07 pm
- Location: Zwaag Nederland
After some paint cracks and 6 months of waiting for a warranty frame,
Merida gave me a Black Night 2011 including top tube cable routing.
The frame was well equipped with a piece of foam to put around the top tube for clamping in a workstand
an 2 spacers to increase the headtube, two trp brakes, adjustable seatpost.
I`ve got a DT swiss rrc1300 disk wheel in order and will post a pic with that also.
holy molly! Black is outstanding...it needs disc rear wheel
-
- Posts: 165
- Joined: Mon Sep 01, 2008 5:07 pm
- Location: Zwaag Nederland
Updated my TT bike with:
Front wheel DT DICUT 66 clincher 742g
Rear wheel DT RRC 1300 disk clincher
Pulley`s carbon ceramic
Bottombracket full ceramic
Chainring FSA TT 53t
Tires specialized turbo s-works 21mm
-
- Posts: 165
- Joined: Mon Sep 01, 2008 5:07 pm
- Location: Zwaag Nederland
Yes that is correct and there the brake cable comes out too.
I,m currently awaiting on the Continental TT LTD tires.
I,m currently awaiting on the Continental TT LTD tires.
-
- Posts: 165
- Joined: Mon Sep 01, 2008 5:07 pm
- Location: Zwaag Nederland
-
- Posts: 165
- Joined: Mon Sep 01, 2008 5:07 pm
- Location: Zwaag Nederland
-
- Posts: 165
- Joined: Mon Sep 01, 2008 5:07 pm
- Location: Zwaag Nederland
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 165
- Joined: Mon Sep 01, 2008 5:07 pm
- Location: Zwaag Nederland
Updates on the bike:
Ultegra 6800 group 11 speed and carbon 6800 pedals 42t 9000 innerchainring
DT swiss 11 speed body on a 10 speed disc wheel. not too much dish problems. still tucked away behind the seattube.
Pioneer Power meter and display
Titanium carbon QR.
Whishlist: Black Prologo TT CPC saddle and rearwheel stickers the same as the frontwheel.