Old Dura Ace / Lightweight to Campag 11 Can any one help?

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Post Reply
User avatar
benkc1984
Posts: 2
Joined: Sun Apr 21, 2013 6:20 pm

by benkc1984

Hello.

Can anybody help me, I have just purchased a set of Original Dierl & Obermayer Lightweight Wheels with Dura ace 7700 Hubs from Ebay:

http://www.ebay.co.uk/itm/Lightweight-Carbon-Tubular-Wheels-Wheelset-Continental-Tyres-Shimano-8-9-10hub-/290898826441?_trksid=p2047675.l2557&ssPageName=STRK%3AMEWNX%3AIT&nma=true&si=WQ8C1XC6%252FqI1Z6GTsmUZ%252BGJIGOk%253D&orig_cvip=true&rt=nc

I would like to run Campagnolo Super Record 11 Speed EPS groupset on them.

Does anyone know if there is a Freehub that will allow this on Shimano 7700 hub?

Or is there a 11 Speed Campagnolo friendly Cassette that will drop onto the Shimano Freehub?

Thank you in advance.

User avatar
BeeBee30
Posts: 1304
Joined: Sun Dec 21, 2003 8:32 pm
Location: WALES,UK
Contact:

by BeeBee30

I'd like to add that I have the exact same wheels and wonder what my options are to run Dura ace 11?
Ti or dye!

The Weenie formally known as CAADHEAD

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



User avatar
N.T
Posts: 374
Joined: Wed Sep 08, 2004 7:13 pm
Location: Finland

by N.T

carbon sports can refit a dt 240 hub to that and that will enable you to run what you want.
Fuelled by kofein

borja
Posts: 50
Joined: Mon Mar 05, 2012 1:36 am

by borja

I think these are DT240s hubs. If so you just need a DT Campy rotor.
For DA 11 speed you need to get a 11speed conversion kit - new 11speed rotor and the washer on the left side.

User avatar
BeeBee30
Posts: 1304
Joined: Sun Dec 21, 2003 8:32 pm
Location: WALES,UK
Contact:

by BeeBee30

They are Dura Ace 7700 hubs.
Ti or dye!

The Weenie formally known as CAADHEAD

User avatar
benkc1984
Posts: 2
Joined: Sun Apr 21, 2013 6:20 pm

by benkc1984

Thanks for the help N.T, i was not aware that Carbon Sports could do that, it sounds expensive but the only way.

Cheers, Ben.
--------------------------------------

Cipollini RB800 - Cannondale Super Six Evo HM - Ritte Bosberg - Kona Paddywagon

sedluk
Posts: 412
Joined: Mon Sep 07, 2009 3:10 am

by sedluk

They don't look like DT Swiss hubs to me. It was my understanding that they had Tune hubs. If that is the case maybe Carbonsports can change them to a Campy Tune hub.

thisisatest
Shop Owner
Posts: 1980
Joined: Sat Jun 13, 2009 4:02 am
Location: NoVA/DC

by thisisatest

The rear is definitely a Shimano hub, or at least the freehub body. I was not aware Lightweight ever did that, I thought it was always Tune or DT.
But it's not a 7700 hub either. It's a 7400-series hub. It is compatible with up to 10speeds, but NOT compatible with any cassettes with an 11tooth first cog. Must start with a 12 or larger.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



phallenthoul
in the industry
Posts: 692
Joined: Wed May 28, 2008 12:15 pm

by phallenthoul

mail Lightweight. they're very responsive and helpful according to my experience.

Post Reply