Lightweight aero road bars
-
- Posts: 276
- Joined: Thu Mar 28, 2013 11:07 pm
Anyone got experience of Vukasprint vs Bontrager XXX Aero
http://www.zipp.com/bars/vukasprint/
http://bontrager.com/model/11289
Or any alternative suggestions at similar weight - full internal cable routing (for SRAM Red not electronic) is mandatory
http://www.zipp.com/bars/vukasprint/
http://bontrager.com/model/11289
Or any alternative suggestions at similar weight - full internal cable routing (for SRAM Red not electronic) is mandatory
It looks nice, get it.
Trek Mad-one 7 Series team colours http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=115500&start=15
Fuji SL 1.1 http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=140134&hilit=Fuji
Fuji SL 1.1 http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=140134&hilit=Fuji
-
- Posts: 276
- Joined: Thu Mar 28, 2013 11:07 pm
Yeah the question is which one and why.
I already bought the alloy version of the Bontrager but now I think I'll be able to find the money for the carbon (and the bike frankly deserves a carbon bar), so the alloy will go on the flea
I already bought the alloy version of the Bontrager but now I think I'll be able to find the money for the carbon (and the bike frankly deserves a carbon bar), so the alloy will go on the flea
I've been using the Kuota Katch-01 for some time, and like it a lot for its compact shape and the nice transition from the hoods to the bar: http://kuota.it/component.php?IDComponente=29 .
Bikes: Raw Ti, 650b flatbar CX
-
- Posts: 236
- Joined: Tue Feb 05, 2013 8:29 pm
If you have the alloy version of the Bonty one and you like it, go for that one. There won't be any particular difference between the two except for specific shape and graphics, so you might as well go with the one that you know is comfortable for you.
-
- Posts: 276
- Joined: Thu Mar 28, 2013 11:07 pm
It's still in the box so hard to say if it's comfortable or not...
-
- Posts: 276
- Joined: Thu Mar 28, 2013 11:07 pm
I do know I want the shortest reach version - the Bonty is 85mm, but not sure about the Zipp
I doubt anyone has tried both, and the most important thing about choosing bars is its fit for your bike. Look at the reach and drop and see which one you like. I used the 3T ergonova before the vuka sprint now and prefer the latter for the longer reach.
Both of the bars you listed have internal cable routing, weight doesn't differ significantly, and no one can possibly do a watt savings comparison, so just look at fit.
Both of the bars you listed have internal cable routing, weight doesn't differ significantly, and no one can possibly do a watt savings comparison, so just look at fit.
Trek Mad-one 7 Series team colours http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=115500&start=15
Fuji SL 1.1 http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=140134&hilit=Fuji
Fuji SL 1.1 http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=140134&hilit=Fuji
I know Bonty has a 30-day "trial" period for certain items, where an authorized Trek dealer will take back a used item within 30 days if you aren't happy with it for any reason (keep your receipt). I'm not sure if that applies to handlebars, but it might be worth it to find out.
Madone 9 https://goo.gl/7UwZpV
Crockett https://goo.gl/f5PdCN
Madone 5 https://goo.gl/cMdyFo
Madone 4, Cobia. I own a lot of Treks.
Crockett https://goo.gl/f5PdCN
Madone 5 https://goo.gl/cMdyFo
Madone 4, Cobia. I own a lot of Treks.
-
- Posts: 276
- Joined: Thu Mar 28, 2013 11:07 pm
Reach - short or long?
Comfort of the flats (rear edge looks quite "sharp"?)
Stiffness / road feel.
Ease of internal cabling and tidiness of cabling from "output" ports into bike frame
thanks
Comfort of the flats (rear edge looks quite "sharp"?)
Stiffness / road feel.
Ease of internal cabling and tidiness of cabling from "output" ports into bike frame
thanks
mattjevans wrote:Reach - short or long?
Comfort of the flats (rear edge looks quite "sharp"?)
Stiffness / road feel.
Ease of internal cabling and tidiness of cabling from "output" ports into bike frame
Reach - Short or Long depends on your fit!
Comfort - much wider than the 3T Ergonovas I had but I can't say it's very uncomfortable even if my thumb has to go over the rear edge. Don't spend too much time on the top bars anyway.
Stiffness - Better than 3T Ergonova Ltd
Ease of cabling - my mechanic did that, I didn't ask...
Trek Mad-one 7 Series team colours http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=115500&start=15
Fuji SL 1.1 http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=140134&hilit=Fuji
Fuji SL 1.1 http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=140134&hilit=Fuji
Hi
I have about a 800 miles on the Zipps they are not uncomfortable for me but they do not take any road vibration away like FSA wing bars.
I installed Di2 in my bars it went easier than installing cables in FSA wing bars.
Do I think they make you faster no way but on a Cervelo S5 it looks fast.
uote="mattjevans"]Anyone got experience of Vukasprint vs Bontrager XXX Aero
http://www.zipp.com/bars/vukasprint/" onclick="window.open(this.href);return false;
http://bontrager.com/model/11289" onclick="window.open(this.href);return false;
Or any alternative suggestions at similar weight - full internal cable routing (for SRAM Red not electronic) is mandatory[/quote]
I have about a 800 miles on the Zipps they are not uncomfortable for me but they do not take any road vibration away like FSA wing bars.
I installed Di2 in my bars it went easier than installing cables in FSA wing bars.
Do I think they make you faster no way but on a Cervelo S5 it looks fast.
uote="mattjevans"]Anyone got experience of Vukasprint vs Bontrager XXX Aero
http://www.zipp.com/bars/vukasprint/" onclick="window.open(this.href);return false;
http://bontrager.com/model/11289" onclick="window.open(this.href);return false;
Or any alternative suggestions at similar weight - full internal cable routing (for SRAM Red not electronic) is mandatory[/quote]
I've got vukasprints. The cable routing was kind of a pain, but that was with i-links, I'd imagine standard cable housings would be a breeze. It is pretty tidy, cables come out right where they need to, to get into the frame cleanly. The comfort is fine, I don't really rest my hands on the flats a whole lot, but when I do it's palm down on the tops, fingers rolled over the front, so I don't really feel the back edge, and it isn't really sharp anyway. They are stiff, I feel like there's still a bit of vibration damping though.
Final FYI, don't clip your knee on them in a sprint!
Final FYI, don't clip your knee on them in a sprint!
-
- Similar Topics
- Replies
- Views
- Last post
-
- 11 Replies
- 1364 Views
-
Last post by bilwit
Tue Jul 11, 2017 8:00 pm
-
-
Alloy road bar with a drop curve like the ENVE SES Aero Road Bar?
by VTR1000SP2 » Mon May 22, 2017 12:38 am » in Road - 11 Replies
- 2335 Views
-
Last post by cwdzoot
Wed Oct 04, 2017 4:08 pm
-
-
- 9 Replies
- 1268 Views
-
Last post by joejack951
Tue Sep 19, 2017 12:10 pm
-
- 1 Replies
- 439 Views
-
Last post by jeanjacques
Tue Jul 11, 2017 9:16 pm
-
- 2 Replies
- 427 Views
-
Last post by Marin
Thu Nov 02, 2017 8:12 am