Pictures of Colnagos
Moderators: maxim809, Moderator Team
- SalsaLover
- Posts: 431
- Joined: Sat Jun 19, 2010 8:21 pm
- Location: Zürich, Switzerland
It's a 56
Thanks for the comments,
@Calnago yes it looks to be so, very well proportioned and as the line on the wall shows the stem is parallel to the floor which I like much better than the sloping stem.
I did it also because I ordered a Master 30th from Mike at maestro, special order with threaded precisa fork, I will build it with identical fit but a full metal version of this C50 and I will use a Cinelli 120mm 1A quill stem and Giro d'Italia bars, waiting for delivery in probably a month or so
Thanks for the comments,
@Calnago yes it looks to be so, very well proportioned and as the line on the wall shows the stem is parallel to the floor which I like much better than the sloping stem.
I did it also because I ordered a Master 30th from Mike at maestro, special order with threaded precisa fork, I will build it with identical fit but a full metal version of this C50 and I will use a Cinelli 120mm 1A quill stem and Giro d'Italia bars, waiting for delivery in probably a month or so
eurperg wrote:Thomson X2 -10 or Deda Superleggero -8 degree could be worth considering too...
but even after nearly a year of promotion,marketing and listed within e-stores and even asking Deda themselves when.......... the Superleggero is STILL not available........
.... bitter? ..... me?
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- SalsaLover
- Posts: 431
- Joined: Sat Jun 19, 2010 8:21 pm
- Location: Zürich, Switzerland
here with the more modest, but nicer riding wheels, hand builts Record Hubs, Open Pros, Revos/Comp, Alu nipples, Vittorial Open Corsas and Latex Tubes, this is the wheelset that actually gets ridden most
DSC00229.jpg por Salsa_Lover, en Flickr
DSC00229.jpg por Salsa_Lover, en Flickr
Last edited by SalsaLover on Sun Jun 30, 2013 11:45 pm, edited 1 time in total.
SalsaLover: Lovely, probably my dream, so a frame should look like
/jonas l
http://instagram.com/jonaslundb
http://instagram.com/jonaslundb
- irongatsby
- Posts: 404
- Joined: Fri Jan 21, 2011 7:59 am
- Location: Los Angeles
Hi Salsalover, I can already picture the 'proper' looking Master standing next to her carbon younger sister. Very nice update.
I'm with you Corky....they should rename it the 'Super-lag-gero'.
I'm with you Corky....they should rename it the 'Super-lag-gero'.
- SalsaLover
- Posts: 431
- Joined: Sat Jun 19, 2010 8:21 pm
- Location: Zürich, Switzerland
Thanks to all for the comments
I am impatiently waiting for my frame, ordered a month ago, I guess there are still 4-6 weeks still to wait for.
Master 30th Anniversary in AD10 paint scheme, threaded precisa fork
About the build kit the decided parts of it are
- Record threaded headset
- Cinelli 1A quill stem 120mm
- Cinelli Giro d'Italia handlebars 42cm
- Campagnolo Chorus/Titanium Seatpost. ( I have it )
- Wheelset 1 : Chorus hubs/Open Pro blue rims, Revos/Comp, Alu nipples, 36x3cross, Vittoria Open Corsas and Latex Tubes ( I have it )
- Wheelset 2 : Silver Record hubs/Mavic GP4 CD rims, Comps, Brass nipples, 32x3cross, Veloflex Roubaix ( I have it )
The parts of the Build kit to decide are the perennial decision on a Master: Classic Silver vs Modern Carbon
I have 2 full groupsets for this build
- A NOS Ultra Torque/Ultra Shift 2010 full silver Centaur
- A NOS 2009 Record 11
I haven't decided yet what will be the final build, but I will start with the Centaur silver and see how it goes.
That Centaur Silver will go with a Brooks Swift Titanium in black and blue handlebar tape, perfect match with the Open Pro and GP4 wheelsets I already have.
The only drawbacks on this build, is that is 10 speed, bushings in brakes and shifters instead of bearings and a bit heavier, but sure the silver will go very well with all the other chromed parts.
It is a pitty Campagnolo doesn't produce a high level groupset in full silver, a Record level 11 speed one would be very good.
If at the end I decide to go modern, it will be built on that Record 11 and on a Selle Italia SLR Carbonio White and white tape and Hyperons.
I am impatiently waiting for my frame, ordered a month ago, I guess there are still 4-6 weeks still to wait for.
Master 30th Anniversary in AD10 paint scheme, threaded precisa fork
About the build kit the decided parts of it are
- Record threaded headset
- Cinelli 1A quill stem 120mm
- Cinelli Giro d'Italia handlebars 42cm
- Campagnolo Chorus/Titanium Seatpost. ( I have it )
- Wheelset 1 : Chorus hubs/Open Pro blue rims, Revos/Comp, Alu nipples, 36x3cross, Vittoria Open Corsas and Latex Tubes ( I have it )
- Wheelset 2 : Silver Record hubs/Mavic GP4 CD rims, Comps, Brass nipples, 32x3cross, Veloflex Roubaix ( I have it )
The parts of the Build kit to decide are the perennial decision on a Master: Classic Silver vs Modern Carbon
I have 2 full groupsets for this build
- A NOS Ultra Torque/Ultra Shift 2010 full silver Centaur
- A NOS 2009 Record 11
I haven't decided yet what will be the final build, but I will start with the Centaur silver and see how it goes.
That Centaur Silver will go with a Brooks Swift Titanium in black and blue handlebar tape, perfect match with the Open Pro and GP4 wheelsets I already have.
The only drawbacks on this build, is that is 10 speed, bushings in brakes and shifters instead of bearings and a bit heavier, but sure the silver will go very well with all the other chromed parts.
It is a pitty Campagnolo doesn't produce a high level groupset in full silver, a Record level 11 speed one would be very good.
If at the end I decide to go modern, it will be built on that Record 11 and on a Selle Italia SLR Carbonio White and white tape and Hyperons.
- SalsaLover
- Posts: 431
- Joined: Sat Jun 19, 2010 8:21 pm
- Location: Zürich, Switzerland
In full Paris-Roubaix mode... who said alloy tubulars were dead ?
DSC00266.jpg por Salsa_Lover, en Flickr
DSC00266.jpg por Salsa_Lover, en Flickr
Last edited by SalsaLover on Sun Jun 30, 2013 11:46 pm, edited 1 time in total.
Love it!
Wow, tide, that's an absolute stunner!
Bikes: Raw Ti, 650b flatbar CX
- SalsaLover
- Posts: 431
- Joined: Sat Jun 19, 2010 8:21 pm
- Location: Zürich, Switzerland
That's a beautiful Master, congratulations, AD14 is a paintscheme that is high on my list of all time favorites.
This build makes me doubt even more about what to do with my Master when it arrives :p
This build makes me doubt even more about what to do with my Master when it arrives :p
Congrats tide75!
I 'd prefer it with shallow wheels and another saddle but it is nice as it is as well.
I 'd prefer it with shallow wheels and another saddle but it is nice as it is as well.
Last edited by kgt on Wed Apr 17, 2013 4:58 pm, edited 1 time in total.
Beautiful, I like it!
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com