old pair of eggbeaters... tuning?
Moderator: robbosmans
ok i have this pair of eggbeater stainless that i love dearly. but thinking if it's possible to tune it to be lighter? currently it's at 283.5g per pair..
i'm not a mechanical engineer by any means.. but quite handy with tools.
any suggestion on tuning? i know you can replace some parts here and there to make it lighter.. but anything more?
i'm not a mechanical engineer by any means.. but quite handy with tools.
any suggestion on tuning? i know you can replace some parts here and there to make it lighter.. but anything more?
- bikerjulio
- Posts: 1900
- Joined: Fri Dec 11, 2009 10:38 pm
- Location: Welland, Ontario
I rebuilt a set with Ti spindles. I'd have to go weigh them as I've forgotten. Been fine for a couple of years.
There's sometimes a buggy.
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Ti spindles... are there any generic brands or do i have to get the one specifically from crank bro. reason why i ask is perhaps there's a 3rd party version that will be lighter?
i saw the eggbeater 11... 178g for a pair.. but for $450.. i rather use that on the farsport 38mm i'm saving up for.
i saw the eggbeater 11... 178g for a pair.. but for $450.. i rather use that on the farsport 38mm i'm saving up for.
- bikerjulio
- Posts: 1900
- Joined: Fri Dec 11, 2009 10:38 pm
- Location: Welland, Ontario
System has my supplier I think. Was in US and text is similar. I paid about $45 at the time for these http://shop.titaniumspindles.com/Standard-Ti-Spindle-Fits-Crank-Brothers-Egg-Beater-Pre-2010-Ward-CB-EB-STD-Ti.htm;jsessionid=4CCB52D78534717425F28C07D918B290.qscstrfrnt02 and as I say, I rebuilt the pedals with a new bearing kit and they have been fine.
There's sometimes a buggy.
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
nice.. thank you both for the info. i need to check my box to see which year my eggbeater was purchased. it's been a while, so not sure which one exactly.
the only $45 ones i see are from china.. not from the links you gave me... but as long as it lightweight, fits and works.. that's all it matters.
the only $45 ones i see are from china.. not from the links you gave me... but as long as it lightweight, fits and works.. that's all it matters.
- bikerjulio
- Posts: 1900
- Joined: Fri Dec 11, 2009 10:38 pm
- Location: Welland, Ontario
I bought mine a couple of years ago - it's the same ones - now $55.
My pedals are the older SL's. Now weigh 112g.
My pedals are the older SL's. Now weigh 112g.
There's sometimes a buggy.
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
You can get the old 4ti rather cheap if you look around. That is the best platform for the lightest pedals.
I replaced the original ti spindle with the Ward version. Nice spindles and comes in many different lengths. They have a very nice feel compared to the steel ones. More springy I also replaced the springs for ti as the old went soft. Bought from a guy in Germany.
https://www.dropbox.com/s/do8v17lui7ddtgy/Photo%2005-01-12%2019.53.37.jpg
I replaced the original ti spindle with the Ward version. Nice spindles and comes in many different lengths. They have a very nice feel compared to the steel ones. More springy I also replaced the springs for ti as the old went soft. Bought from a guy in Germany.
https://www.dropbox.com/s/do8v17lui7ddtgy/Photo%2005-01-12%2019.53.37.jpg
It's online again:The Machinist
My CAAD10:http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=109014
My CAAD10:http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=109014
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com