HOT: Active* forum members generally gain 5% discount at starbike.com store!
Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Articles FAQ Contact About




Post new topic Reply to topic  [ 12 posts ] 
Author Message
PostPosted: Mon Apr 08, 2013 12:17 pm 
Offline

Joined: Thu Feb 14, 2008 7:19 pm
Posts: 900
Location: South Carolina
Guys especially those who are tinkers and or mechanic. I have a new CAAD10, love the bike, but the clamp is shite! The bolt sheared, and then the clamp itself stripped, all using the handheld torque key from Bontrager that is set to the recommended torque. The clamp itself is an odd ball size, 30.9 I think I have seen it mentioned. Is there a way to shim the clamping area to a larger clamp so that I can buy a better aftermarket one, say a Thomson or something else stronger. I was racing yesterday and at the end of the race, the saddle had slipped down about 5mm, it was actually a good thing, I started feeling stronger due to that, but I dont want it to continue to move.

No CDale dealers around here have spares and God forbid they pull one off a floor bike and not have a customer wait four days to get one.

HUMP

_________________
Why are the best things in life always the ones you start last?


Top
 Profile  
 
Posted: Mon Apr 08, 2013 12:17 pm 


Top
  
 
PostPosted: Mon Apr 08, 2013 2:26 pm 
Offline

Joined: Tue Feb 05, 2013 8:29 pm
Posts: 236
If it's a new CAAD10, why aren't you warrantying it? If your Cannondale dealer isn't willing to get you another one, send a complaint to Cdale. Cdale is VERY good about customer service, up to the point of replacing a years-out-of-warranty frame if it develops a problem. They'll give you a new clamp no problem and probably yell at your dealer for being idiots as well.

As for the seatpost clamp...what did you do to that poor thing? Just giving you a hard time. You must have just gotten unlucky and gotten a bad one, so long as you're sure your torque key isn't trash and you did actually just hamfist the poor thing. That's what warranties are for, and they'll probably give you a new one even if you did cause it yourself.

30.9 is a bit of an odd size for a clamp, so you'll want to double check that and measure it yourself/have it measured for you. There's nothing saying you can't shim your collar, it's just not the "right" way to od it.


Top
 Profile  
 
PostPosted: Mon Apr 08, 2013 2:54 pm 
Offline

Joined: Thu Feb 14, 2008 7:19 pm
Posts: 900
Location: South Carolina
I was adjusting a good bit, and used the torque T-handle from Bontrager that I had with my TREK. I do adjust alot until I get to the sweet spot, which I have finally found.

HUMP

_________________
Why are the best things in life always the ones you start last?


Top
 Profile  
 
PostPosted: Mon Apr 08, 2013 9:15 pm 
Offline

Joined: Mon Dec 28, 2009 8:30 pm
Posts: 3668
Location: Bay Area
KCNC makes a 30.9

_________________
Don't take me too seriously. Super Six Evo Hi-Mod


Top
 Profile  
 
PostPosted: Tue Apr 09, 2013 12:40 pm 
Offline

Joined: Thu Feb 14, 2008 7:19 pm
Posts: 900
Location: South Carolina
I see 30.7 KCNC, Would that work?

My Cannondale Rep is supposed to be sending me one, but I need one now. That does not help with KCNC either, but at least this may be an option for having some just in case.

HUMP

_________________
Why are the best things in life always the ones you start last?


Top
 Profile  
 
PostPosted: Tue Apr 09, 2013 1:17 pm 
Offline
User avatar

Joined: Mon Apr 11, 2011 6:28 pm
Posts: 172
Location: Palm Coast, Fl.
Call this shop they are excellent Cannondale dealers and will sell and send parts anywhere fast for your Cannondale. They are about a 2 hour drive from me and I had them sell me some Cannondale carbon spacers right off a floor bike. They will go the extra mile and send the clamp too you the same day. http://outspokenbikes.com/Out-SpokeN/Home.html


Top
 Profile  
 
PostPosted: Tue Apr 09, 2013 1:19 pm 
Offline

Joined: Wed Mar 17, 2010 4:16 am
Posts: 28
Double clamps are the best for solving slippage issues. The clamp not only the frame but the post as well. You don't need excessive torque on them. If you can't find exactly the right size, get one a little big and use a coke can to make shims up.

Image


Top
 Profile  
 
PostPosted: Tue Apr 09, 2013 1:41 pm 
Offline

Joined: Thu Feb 14, 2008 7:19 pm
Posts: 900
Location: South Carolina
jacks1071 wrote:
Double clamps are the best for solving slippage issues. The clamp not only the frame but the post as well. You don't need excessive torque on them. If you can't find exactly the right size, get one a little big and use a coke can to make shims up.

Image


This would be a great option, I noticed this on the Giant bikes of a team this weekend, that they had double opposing clamps.

Where can I get these?

HUMP

_________________
Why are the best things in life always the ones you start last?


Top
 Profile  
 
PostPosted: Tue Apr 09, 2013 8:43 pm 
Offline

Joined: Mon Dec 28, 2009 8:30 pm
Posts: 3668
Location: Bay Area
Yup, that KCNC will work. I got mine from Fairwheel.

_________________
Don't take me too seriously. Super Six Evo Hi-Mod


Top
 Profile  
 
PostPosted: Tue Apr 09, 2013 9:59 pm 
Offline
User avatar

Joined: Fri May 12, 2006 2:11 pm
Posts: 1200
Location: Bergen, Norway
Tune also have. Never had any problem with my Cannondale clamp. Maybe it's some problem with Bontrager and Cannondale ;)

_________________
/jonas l
http://cerrol.wordpress.com (my cyclingblog)


Top
 Profile  
 
PostPosted: Wed Apr 10, 2013 12:13 pm 
Offline

Joined: Thu Feb 14, 2008 7:19 pm
Posts: 900
Location: South Carolina
cerro wrote:
Tune also have. Never had any problem with my Cannondale clamp. Maybe it's some problem with Bontrager and Cannondale ;)


You may be right, mixing those two parts may have caused a rift that sheared the bolt!

HUMP

_________________
Why are the best things in life always the ones you start last?


Top
 Profile  
 
PostPosted: Thu Apr 11, 2013 7:13 am 
Offline

Joined: Thu Mar 26, 2009 11:06 pm
Posts: 167
Double clamp looks like the antithesis of all things ww!


Top
 Profile  
 
Posted: Thu Apr 11, 2013 7:13 am 


Top
  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 


Who is online

Users browsing this forum: AGW, Bing [Bot], Exabot [Bot], Google [Bot], maggierose, WESTMOTORSPORTS and 60 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Lightweight seatpost clamp

in Road

vitriol

10

1213

Wed Oct 02, 2013 1:43 pm

Ceebers1 View the latest post

There are no new unread posts for this topic. Your take on Mcfk seatpost & seat-clamp?

[ Go to page: 1, 2 ]

in Road

Limbo

19

1144

Wed Jan 01, 2014 4:27 pm

DMF View the latest post

There are no new unread posts for this topic. USE Alien seatpost clamp breakage

in Road

odin99

2

489

Sat Aug 10, 2013 4:58 pm

CrossRob View the latest post

There are no new unread posts for this topic. Bontrager seatpost rotary clamp/ears (+SLR carbon rails)

in Road

sanrensho

4

194

Thu May 29, 2014 8:11 pm

sanrensho View the latest post

There are no new unread posts for this topic. Hub adjustment Lightweight Standard III

in Road

tomtom

0

284

Thu May 29, 2014 9:50 pm

tomtom View the latest post


It is currently Thu Jul 31, 2014 3:35 pm

All times are UTC + 1 hour




Advertising   –  FAQ   –  Contact   –  Convert   –  About

© Weight Weenies 2000-2013
hosted by starbike.com


How to get rid of these ads? Just register!


Powered by phpBB