Some new photos after a few days of silence..quite busy these days and didn't had a lot of time for carbon projects, but anyway, here are some of them.
If you ever wondered how a combo looks before clearcoat, somehow like this:
I still had to sand it a bit, then clean with alcohol etc.,...and clearcoat.
Just another photo - worn nail after hours of precise work with different tools...
Working on a completely new custom project, this time not for cycling...
And some more interesting news that I didn't shared yet - a new prototype combo for a special bike..
Some weight and aero tuning:
352g vs. 455g(the tuned PROTO-TYPE combo on the left is ~30mm shorter).
More than 100g weight savings and more aero.
And a new roll of high quality carbon fiber - UD prepreg
Complete roll (!) will be used for experiments, prototype products and testing..of course the roll is stored in freezer at -30°C..
I'm preparing for some new projects...
But not everythign is perfect - the moulds for the saddle rails still aren't finished. There is a small detail that has to be changed for making the moulds for it. The product will remain as it was designed, but the tools have to change a bit, so it may take some more time before I'll have the first prototype saddles,..I'll for sure keep you updated about the progress!
_________________Berk PROTO-TYPE Composites - Handmade In SloveniaBerk Compositeshttp://www.berk-composites.com/