Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Mon Nov 20, 2017 8:27 pm

All times are UTC+01:00





Post new topic  This topic is locked, you cannot edit posts or make further replies.  [ 4 posts ] 
Author Message
PostPosted: Fri Mar 29, 2013 9:43 pm 
Offline

Joined: Fri Jun 03, 2011 6:30 pm
Posts: 112
Getting ready to put these on. I have si sl armes and a new spider ring. Which parts of the spindle should be greased? Any guidelines on the number of shims to me used on a super six evo?

Many, many, many threads on this.


Top
   
 
Posted: Fri Mar 29, 2013 9:43 pm 


Top
   
 
PostPosted: Sat Mar 30, 2013 1:17 am 
Offline
Best Freak bike poster

Joined: Mon May 25, 2009 9:34 am
Posts: 425
Location: Mel, Australia
SiSl2 Install Guide

In regards to the number of shims, install the cranks using just the standard DS and NDS spacers and wave washer. Torque to 40nm and see how many shims you can fit in the space between the NDS spacer and the bearing shield to fully compress the wave washer. This is the number of shims you'll need.

On my bike, I use one 1mm shim.

_________________
CAAD10 Di2


Top
   
 
PostPosted: Sat Mar 30, 2013 12:31 pm 
Offline

Joined: Sat Feb 07, 2009 5:52 am
Posts: 561
I would grease the following:
crank/spidering interface
Lockring
spindle flutes
crank bolt threads and underside of head (including steel washers)

AS above, you'll need to install in order gauge # of shims required.


Top
   
 
PostPosted: Sat Mar 30, 2013 11:55 pm 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
If you want to do it how it's supposed to be done, do not grease the spidering or the lockring. Cannondale specs Loctite 242 for both places, although I consider the spline interface a retaining ring type of fitment and go with 603/609. You should grease all other contact points, bolt threads and bolt head face, spindle spline, etc.
Tcurtbike's method of determining the ideal number of washers is the best way. Just make sure that the crank is fully bottoming out every time.


Top
   
 
Display posts from previous:  Sort by  
Post new topic  This topic is locked, you cannot edit posts or make further replies.  [ 4 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Cannondale SI non-flat Crank-Spider interface

in Road

Kurets

5

668

Sun Apr 16, 2017 9:03 pm

Kurets View the latest post

There are no new unread posts for this topic. How To Fit A Campagnolo Ultra Torque Crank To Cannondale PF30a BB

in Road

JayTheCyclist

7

880

Sat Apr 22, 2017 10:44 pm

stormur View the latest post

There are no new unread posts for this topic. Di2 install help

in Road

stub

4

728

Thu Apr 13, 2017 12:37 am

stub View the latest post

There are no new unread posts for this topic. Attachment(s) How to install the Canyon Aeroad cf slx 8.00 seatpost

in Road

edenn

3

947

Mon May 15, 2017 4:40 pm

Shrike View the latest post

There are no new unread posts for this topic. Attachment(s) How to install a Campy SR 11s fr. derailleur clamp-on 35mm on a Colnago Super?

in Road

Kupepe

0

223

Fri Mar 17, 2017 12:36 pm

Kupepe View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: agfu, beanbiken, Bing [Bot], DurianGrey, Miller, MoreRideTime, PSJoyce, TimmS and 36 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited