Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Tue Dec 06, 2016 7:05 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062

All times are UTC+01:00

Post new topic  Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Valve lock on a tubie
PostPosted: Fri Mar 29, 2013 6:51 am 

Joined: Mon Dec 20, 2010 2:54 am
Posts: 59
Have a slight problem which I hope WW's can help with. I am using Vittoria CR tubies that do not have removable valve core or screw off at the tyre that allows for a complete valve extension change out to the right length. I thought that I had left the valve sufficiently screwed open when putting on the extension but over time( 3 months) it has worked its way closed meaning I cannot pump it up. Obviously I would prefer not having to rip it off and was wondering if there is some nifty way or securing the top of the valve through the extension that would allow me to screw it back open again.

PostPosted: Fri Mar 29, 2013 11:42 am 

Joined: Fri Dec 24, 2010 9:37 pm
Posts: 954
Location: it's raining, it must be uk
if you can unscrew the extension it'll give you more space to work in

then use a bit of tubing that'll fit tight over the end of the core, push it on and unscrew

Posted: Fri Mar 29, 2013 11:42 am 

PostPosted: Fri Mar 29, 2013 12:11 pm 

Joined: Fri Mar 16, 2012 1:49 pm
Posts: 138
Location: LA/OC, California
If it's only lightly closed, you could just flip your valve extender upside down, push down firmly against the valve core and try to turn it open. Happened to me a few times and I just ended up doing that.

Bike: Felt FC


PostPosted: Fri Mar 29, 2013 3:50 pm 

Joined: Sat Dec 13, 2003 2:25 am
Posts: 4773
Location: Canada
That is exactly the reason we don't use them. While the 'right' answer is to remove the tire and re-do it with a 'proper' extender, the smart thing to do is to try to open the valve.

Try to unthread the valve extender. If you can't do it easily, don't force it, you could damage the interface between the valve and tube. I did this for a neighbor before (Tri-geek) with a small wooden dowel with a little tubular glue on it. It worked. Fortunately (unfortunately) he promptly rode through a whole pile of broken glass in the alley behind his house and cut his race tires to ribbons (doctors)! He learned not to ask the LBS to do that work...

PostPosted: Sat Mar 30, 2013 8:03 pm 

Joined: Fri Feb 01, 2013 12:26 pm
Posts: 33
topeak valve extenders have an internal "tube" designed for exactly this situation. They open and close the valve screw even when the extender is fitted. However, you can usually achieve the same with a thin but rigid plastic tube, like you get with spray lubes etc. You just need to open up or widen the end a bit to fit tightly over the valve screw.

Posted: Sat Mar 30, 2013 8:03 pm 

PostPosted: Sun Mar 31, 2013 12:23 am 
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
Mavic has extenders that are specifically designed to be flipped around to screw/unscrew the presta valve. it grips them just right.
Next time, though, you should "jam" the valve open by unscrewing the valve nut a little further than you normally can by hand (ie turn w pliers 1/8 of a turn more).

Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Valve extensions

in Road




Fri Aug 05, 2016 8:49 am

fabriciom View the latest post

There are no new unread posts for this topic. Thin Valve Extender

in Road




Mon Mar 14, 2016 1:00 am

Lelandjt View the latest post

There are no new unread posts for this topic. Q. tubeless valve length?

in Road




Thu Jan 07, 2016 2:13 am

ohhyeok90 View the latest post

There are no new unread posts for this topic. Valve length for 50mm rims

[ Go to page: 1 2 ]

in Road




Wed Aug 31, 2016 1:29 pm

Lugan View the latest post

All times are UTC+01:00

Who is online

Users browsing this forum: Bing [Bot], mai, Yahoo [Bot] and 17 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited