Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Sat Oct 01, 2016 9:53 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062

Unanswered topics | Active topics


» »

All times are UTC+01:00

Forum rules


Please click here to view the forum rules



Post new topic  Reply to topic  Page 1 of 1
  [ 13 posts ] 
  Print view Previous topic | Next topic 
Author Message
adrianishikawa
PostPosted: Fri Mar 29, 2013 9:13 am 
Offline

Joined: Fri Feb 22, 2013 1:53 am
Posts: 11
Hello guys, just joined WW.
Just ordered a pair of 2013 eebrakes with the new updated cable adjust screws, somehow unable to fit the Alligator I-links cable stop into the adjust screw. The cable stops were too big in diameter. However have seen the cable stopper fit in the adjust screws in the following URL. Any help please ? :cry: Anyone using I-links with the new eebrakes?

http://www.cyclingtips.com.au/2012/02/bikes-of-the-bunch-cyfac-absolu/
Top
   
Reply with quote  
Weenie
Posted: Fri Mar 29, 2013 9:13 am 


Top
   
 
1415chris
PostPosted: Fri Mar 29, 2013 9:54 am 
Offline

Joined: Sat Apr 18, 2009 8:59 am
Posts: 771
Location: Surrey UK
Reg the assembly on this pic, my guess is that the alloy housing is sitting on the stopper, not going inside.
Why not putting the housing other way round?
In this case housing nicely jumps into the adjusting screw, or you can use stopper between housing and screw if you want.

http://www.flickr.com/photos/90178027@N ... /lightbox/
http://www.flickr.com/photos/90178027@N ... /lightbox/

_________________
Cervelo R5 VWD 5637g/12.43lb
Pronghorn XC SW Race 8284g/18.26lb
Top
   
Reply with quote  
adrianishikawa
PostPosted: Fri Mar 29, 2013 10:07 am 
Offline

Joined: Fri Feb 22, 2013 1:53 am
Posts: 11
1415chris wrote:
Reg the assembly on this pic, my guess is that the alloy housing is sitting on the stopper, not going inside.
Why not putting the housing other way round?
In this case housing nicely jumps into the adjusting screw, or you can use stopper between housing and screw if you want.

http://www.flickr.com/photos/90178027@N ... /lightbox/" onclick="window.open(this.href);return false;
http://www.flickr.com/photos/90178027@N ... /lightbox/" onclick="window.open(this.href);return false;


Thought of that, but I liked the idea of having all of the i-links coming at the same direction from the bars. :?
Top
   
Reply with quote  
sugarkane
PostPosted: Fri Mar 29, 2013 11:02 am 
Offline
in the industry
User avatar

Joined: Wed Jan 19, 2011 11:14 am
Posts: 1454
Location: SYD
Neither of you are doing it right.. There is a step down segment in the ilinks kit. Fits into the EE adjuster just perfect and doesn't require you running the housing backwards which makes no sense as any water running down the housing will do its best to enter the system :|



Image

_________________
Skunkworks Bikes
Top
   
Reply with quote  
adrianishikawa
PostPosted: Fri Mar 29, 2013 11:27 am 
Offline

Joined: Fri Feb 22, 2013 1:53 am
Posts: 11
sugarkane wrote:
Neither of you are doing it right.. There is a step down segment in the ilinks kit. Fits into the EE adjuster just perfect and doesn't require you running the housing backwards which makes no sense as any water running down the housing will do its best to enter the system :|



Image


Doesn't fit in mine.. :cry:
Top
   
Reply with quote  
sugarkane
PostPosted: Fri Mar 29, 2013 12:02 pm 
Offline
in the industry
User avatar

Joined: Wed Jan 19, 2011 11:14 am
Posts: 1454
Location: SYD
File it down.. There are few differnt step down segments.
Get some cailpers and measure things up. Get a nice fine file out and make the step down fit.. A bit of man craft is good for the soul :D

_________________
Skunkworks Bikes
Top
   
Reply with quote  
adrianishikawa
PostPosted: Fri Mar 29, 2013 12:25 pm 
Offline

Joined: Fri Feb 22, 2013 1:53 am
Posts: 11
sugarkane wrote:
File it down.. There are few differnt step down segments.
Get some cailpers and measure things up. Get a nice fine file out and make the step down fit.. A bit of man craft is good for the soul :D


So the ones on your Parlee are filed down ?
Top
   
Reply with quote  
Dammit
PostPosted: Fri Mar 29, 2013 12:42 pm 
Offline

Joined: Sun Mar 27, 2011 8:16 pm
Posts: 443
Older model brakes, but the fitting went straight in:

Image
Top
   
Reply with quote  
adrianishikawa
PostPosted: Fri Mar 29, 2013 12:46 pm 
Offline

Joined: Fri Feb 22, 2013 1:53 am
Posts: 11
Dammit wrote:
Older model brakes, but the fitting went straight in:

Image


I see, but with the newer cable adjustment screws, they have a small internal diameter. :(
Top
   
Reply with quote  
sugarkane
PostPosted: Fri Mar 29, 2013 1:27 pm 
Offline
in the industry
User avatar

Joined: Wed Jan 19, 2011 11:14 am
Posts: 1454
Location: SYD
At first I filed down about 3 lengths of housing to make them 5.0mm then I realized that the ilinks come with a 5.0mm housing stepdown
Get some cailpers and measure some tjngs..
I'm pretty sure you have the same adjusters that I Do you just need to work through the available parts to find he right onesZz

In the picture the stepdowns you need are In the bag in the bottom right hand corner

Image

_________________
Skunkworks Bikes
Top
   
Reply with quote  
adrianishikawa
PostPosted: Fri Mar 29, 2013 1:31 pm 
Offline

Joined: Fri Feb 22, 2013 1:53 am
Posts: 11
sugarkane wrote:
At first I filed down about 3 lengths of housing to make them 5.0mm then I realized that the ilinks come with a 5.0mm housing stepdown
Get some cailpers and measure some tjngs..
I'm pretty sure you have the same adjusters that I Do you just need to work through the available parts to find he right onesZz

In the picture the stepdowns you need are In the bag in the bottom right hand corner

Image


Thanks sugarkane, will do a quick search when I get home, otherwise I am prepared to file them down! Nice bike btw!
Top
   
Reply with quote  
styrrell
PostPosted: Fri Mar 29, 2013 1:58 pm 
Offline

Joined: Mon Apr 19, 2010 10:33 pm
Posts: 167
I know this has been asked and answered before, but it seems like the answerts comflicft and the products have had slight changes so here goes.

Has anyone had success with mini I links and the smaller diameter powercordz for shifters?

Thanks
Top
   
Reply with quote  
Weenie
Posted: Fri Mar 29, 2013 1:58 pm 


Top
   
 
Dammit
PostPosted: Fri Mar 29, 2013 7:26 pm 
Offline

Joined: Sun Mar 27, 2011 8:16 pm
Posts: 443
adrianishikawa wrote:
sugarkane wrote:
At first I filed down about 3 lengths of housing to make them 5.0mm then I realized that the ilinks come with a 5.0mm housing stepdown
Get some cailpers and measure some tjngs..
I'm pretty sure you have the same adjusters that I Do you just need to work through the available parts to find he right onesZz

In the picture the stepdowns you need are In the bag in the bottom right hand corner

pic-of-ilinks.jpg


Thanks sugarkane, will do a quick search when I get home, otherwise I am prepared to file them down! Nice bike btw!


I found the easiest way to take a housing-end down was to put it into the chuck of my drill, then hold it against a file using light even pressure. I then gave it a coat of black paint to match the rest of the iLinks.
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 1
  [ 13 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. eebrakes installation issue

in Road

tomso

7

1074

Thu May 12, 2016 4:26 pm

jrmynthn View the latest post

There are no new unread posts for this topic. eeBrakes Fork Nut - Missing Longer Nut?

in Road

RyanH

5

412

Fri Nov 13, 2015 4:18 pm

RyanH View the latest post

There are no new unread posts for this topic. How to mount the Alligator iLink?

in Road

REDUTOPIA

1

391

Wed Mar 16, 2016 9:42 pm

RyanH View the latest post


» »

All times are UTC+01:00

Who is online

Users browsing this forum: arthurf, Ltoddokc, Marin, martinko, MSNbot Media, Ritxis, stormur and 33 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited