Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Fri Jul 29, 2016 1:13 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 92 posts ]  Go to page Previous 1 2 3 4 5 6 7 Next
Author Message
PostPosted: Wed Mar 06, 2013 7:55 pm 
Offline

Joined: Thu Jul 17, 2008 9:37 pm
Posts: 171
If you guys haven't already, there is a massive thread about these rotors over at MTBR, in the Brake forum. The issue of the out-of-true rotor has even come up, and in the case of that specific poster, they didn't have the rotor mounted up perfectly, which caused it to rub at one point on its rotation.


Top
   
PostPosted: Wed Mar 06, 2013 10:26 pm 
Offline
User avatar

Joined: Fri Jul 23, 2004 8:24 pm
Posts: 1819
Location: Houston, Texas
lordconqueror wrote:
The issue of the out-of-true rotor has even come up, and in the case of that specific poster, they didn't have the rotor mounted up perfectly, which caused it to rub at one point on its rotation.
I have already removed/remounted the rotor prior to my previous post and that did not resolve the issue. Just perused the last few pages of that thread, starting with were folks started receiving rotors and did not see any other posts about rotors being out of true.

_________________
Michael - The Anaerobic Threshold is neither...


Top
   
PostPosted: Thu Mar 07, 2013 7:09 am 
Offline

Joined: Thu Jul 17, 2008 9:37 pm
Posts: 171
lame. i guess it's time for you to fill out the online customer service request form they are so insistent on people using, so they can get you sorted.


Top
   
PostPosted: Thu Mar 07, 2013 5:29 pm 
Offline
User avatar

Joined: Fri Jul 23, 2004 8:24 pm
Posts: 1819
Location: Houston, Texas
Actually I see that as being very customer oriented. So this morning again removed the rotor but this time laid it flat on a granite countertop which indicated the rotor was within +/-2mm of laying flat along the brake track. I also placed the wheel in the truing stand (budget model for basic truing), and using a micrometer, was able to make some adhoc checks for hi/lo variation on the face of each of the rotor disc mounts. I did this by placing the micrometer flush against the arm of the stand and measuring the differences between each of the 6-mounts which varied from as little as .05mm to possibly as much as .50mm. This seems like a very small degree of variation but since it is near the center of the rotors rotation, I am guessing that the lateral variance would be amplified further out along the surface of the rotor. At this point, I am thinking I might need to check with a local machine shop than turned the flanges off my hollowgram spindles to see if they also mill the hub's disc mount faces to much tighter tolerances.

_________________
Michael - The Anaerobic Threshold is neither...


Top
   
PostPosted: Thu Mar 07, 2013 7:50 pm 
Offline

Joined: Fri Jan 05, 2007 5:33 pm
Posts: 374
Location: Stockholm, Sweden
If you have the same rotor sizes front and rear, a simple swap of rotors would reveal if one of them is out of true or if the problem lies with the rear hub...


Top
   
PostPosted: Thu Mar 07, 2013 9:00 pm 
Offline
User avatar

Joined: Thu Oct 26, 2006 8:54 pm
Posts: 470
Location: USA
Or rotate the rotor on the hub by a couple of bolt holes and see if the high / low spots follow the rotor or stay with the wheel...

_________________
Enjoying my Funk


Top
   
PostPosted: Sat Mar 09, 2013 11:07 pm 
Offline

Joined: Thu Jan 13, 2011 4:04 pm
Posts: 514
Location: Sunny UK
ms6073 wrote:
Actually I see that as being very customer oriented. So this morning again removed the rotor but this time laid it flat on a granite countertop which indicated the rotor was within +/-2mm of laying flat along the brake track.


not sure of the whole story but +/- 2 mm runout is far too much. any rotor I have that is fitted to my wheels is well within within 0.5 mm, or +/- 0.25mm (haven't measure any but just by looking)


Top
   
PostPosted: Tue Mar 12, 2013 12:13 am 
Offline
in the industry
User avatar

Joined: Thu May 29, 2008 12:22 am
Posts: 605
That's what I was thinking. 2mm is an awful lot for a brake track to be out, especially on something so small. Is it 2mm extra thickness or is it the same thickness all over but out of flat by 2mm?


Top
   
PostPosted: Tue Mar 12, 2013 2:07 am 
Offline

Joined: Wed Apr 16, 2008 7:43 am
Posts: 214
Location: Sapporo City, Hokkaido, Japan
Anybody using/used these rotors on Formula R1? Seems like a very tight fit into the calipers.


Top
   
PostPosted: Tue Mar 12, 2013 2:28 am 
Offline

Joined: Mon Sep 27, 2010 8:38 am
Posts: 502
Any comments on the brittle-ness of the rotor? On cars, rotors are pretty shielded. On MTBs, they're sort of out there in the wind.


Top
   
PostPosted: Sat Apr 06, 2013 6:47 am 
Offline

Joined: Wed Apr 08, 2009 5:23 am
Posts: 346
Location: Port Angeles, WA
I took delivery of mine (a 160 SFL), and then decided to stick with my Scrubs. I listed it for sale hedre, but no one bought it. So I decided to have a go at it, and mounted it up. Dead-on true mine is. no wobbles. still in the process of properly breaking it in, so i'll report later on its maximum abilities.


Top
   
PostPosted: Sat Apr 06, 2013 9:34 am 
Offline

Joined: Wed May 02, 2012 7:22 pm
Posts: 47
What do you mean, "Dead-on true mine is "? That it has bad or no breaking performance?


Top
   
PostPosted: Sat Apr 06, 2013 12:11 pm 
Offline

Joined: Fri Jan 05, 2007 5:33 pm
Posts: 374
Location: Stockholm, Sweden
Erhar wrote:
What do you mean, "Dead-on true mine is "? That it has bad or no breaking performance?

That it is straight.


Top
   
PostPosted: Mon Apr 08, 2013 2:19 am 
Offline

Joined: Wed Apr 08, 2009 5:23 am
Posts: 346
Location: Port Angeles, WA
LOL, thx for interpreting!
Yes, straight as can be. When the pads just begin touching the rotor, it's a constant sound.


Top
   
PostPosted: Tue Apr 09, 2013 4:19 am 
Offline

Joined: Tue Jan 24, 2012 9:16 pm
Posts: 56
ehh, just wait till the places in china that make the $500 carbon frames start making these things for $30 bucks. Kettle Cycles has no rep anyway so who cares.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 92 posts ]  Go to page Previous 1 2 3 4 5 6 7 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. The Argonaut Cycles

[ Go to page: 13 4 5 6 7 ]

in Introduce Yourself / Gallery - Please use metric weights.

Bely

90

12182

Thu Jul 28, 2016 9:07 am

Bely View the latest post

There are no new unread posts for this topic. The FIELD Cycles

[ Go to page: 17 8 9 10 11 ]

in Introduce Yourself / Gallery - Please use metric weights.

Bely

153

21542

Mon Mar 14, 2016 10:26 pm

Haydn View the latest post

There are no new unread posts for this topic. Field Cycles

in For sale - Pictures are mandatory 22-3-13

Bely

0

470

Fri May 13, 2016 1:45 pm

Bely View the latest post

There are no new unread posts for this topic. Werking cycles prototypes

[ Go to page: 1 2 ]

in Introduce Yourself / Gallery - Please use metric weights.

Werking

25

3920

Tue Jun 21, 2016 8:08 am

Werking View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: MSNbot Media and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited