Good source for Ti bolts?
Moderator: robbosmans
-
- Posts: 65
- Joined: Fri Dec 30, 2011 10:02 pm
I'm interested in replacing some of the stock bolts on my bike with Ti. Anyone have a good source? Located in or easy shipping to the US is a plus.
__________
Seven 622 SLX
Colnago C50 Extreme Power
Zanconato CX
Seven 622 SLX
Colnago C50 Extreme Power
Zanconato CX
Toronto Cycles or Jersey Cyles. Both are or will soon be closed temporarily however.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- stella-azzurra
- Posts: 5066
- Joined: Mon Jan 23, 2006 6:35 am
- Location: New York
I never took drugs to improve my performance at any time. I will be willing to stick my finger into a polygraph test if anyone with big media pull wants to take issue. If you buy a signed poster now it will not be tarnished later. --Graeme Obree
my favorite source for various hardware. they're not closing for good are they? i need to place an order for some ti washers but don't want to get stuck if i place order and they close up for however long.
eric wrote:Toronto Cycles or Jersey Cyles. Both are or will soon be closed temporarily however.
- HammerTime2
- Posts: 5813
- Joined: Thu May 04, 2006 4:43 pm
- Location: Wherever there's a mountain beckoning to be climbed
A little reading, as follow-on to eric's heads-up post, can go a long way.
http://torontocycles.com/ wrote:Toronto Cycles
Temporary Store Closing - March 1st - 2013
On March 1st, 2013, we will be moving location and will close this store for about 2-3 weeks.
During this time I will not be processing orders.
Products and purchase ability will be covered so please hold your orders as we will re-open soon.
I will have email access during this period.
All past orders will be processed and shipped as usual.
We will have many new items and updates to the website after this time.
Sorry for any problems and please email me at sales@torontocycles.com if you have a question.
http://jerseycycles.com/ wrote:Dear Valued customers
From the week of March 11th until April 1st 2013
http://www.jerseycycles.com
will be temporarily closed.
I will be on a trip and unable to fill orders.
I will be reopening the first week of April with new items.
I am sorry if this is any inconvenience.
I will be able to be contacted by Email at
sales@jerseycycles.com
I will be able to process smaller orders until 3-11-13
There will be no Anodizing starting 3-8-13
Thank you and I look forward to seeing you again after I reopen.
Bob
That can't be a random coincidence.
- carlislegeorge
- Posts: 219
- Joined: Sat Mar 24, 2012 4:13 pm
2011 Tarmac Pro SL3 Project Black (gone but not forgotten)
2012 Parlee Z5 SLi (just because)
2014 Colnago C59 (why not)
2012 Parlee Z5 SLi (just because)
2014 Colnago C59 (why not)
they're related (cousins or brothers if i recall). the owner of one of 'em told me the exact relationship once--he referred me to the other store for a part that he didn't have in stock at the moment, mentioned to try his [cousin's/brother's] shop.
i've always had terrific service from both places. ordered a few random ti bits a few weeks back and he actually measured the width of the ti washer that i needed so as to make sure it would fit my application.
i've always had terrific service from both places. ordered a few random ti bits a few weeks back and he actually measured the width of the ti washer that i needed so as to make sure it would fit my application.
djconnel wrote:That can't be a random coincidence.
I just went with Pro-Bolt to replace the bow-tie bolts on my Speedplays. Shipping was a bit pricey: total was $20/10 bolts, which is still cheap on a $/gram basis.
Anyone know a source for Keywin cleats bolts?
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com