Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Sun May 01, 2016 3:42 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed
- Tapatalk connection is currently broken

Those bugs will be fixed ASAP (next few days) as they are unfortunately more serious than expected.

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Sun Mar 10, 2013 3:11 am 
Offline

Joined: Mon Dec 28, 2009 8:30 pm
Posts: 5103
Location: Bay Area
For some reason my rear brake cable is having difficulties with that entry port. Tried different housing lengths, but it seems to end up pinching/crimping or sliding out of the ferrule. I noticed a few pro teams actually run a few Nokon links because of this, but hadn't tried that yet myself. Does anyone have any advice? Its a stupid problem and I'm surprised its giving me any grief at all.

_________________
Don't take me too seriously.
Gramz
Strava


Top
   
PostPosted: Sun Mar 10, 2013 11:12 am 
Offline

Joined: Fri Mar 09, 2007 1:26 am
Posts: 544
Location: USA
Is the rear furrule stop in place? The ferrule stop is loose and will fall out when un-building or building up. What size is the frame... some smaller frames the rear brake cable routing is quite different.


Top
   
PostPosted: Mon Mar 11, 2013 3:28 am 
Offline

Joined: Tue Jul 07, 2009 11:28 pm
Posts: 65
I believe on the 48-52 evos the rear brake routing exits underneath the top tube instead of the back of the seat tube.


Top
   
PostPosted: Mon Mar 11, 2013 11:18 am 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
You say "entry" port, so I'm assuming you're talking about the stop at the head tube. That area is always an issue with the EVO. Fortunately, it looks like Jagwire may be coming to the rescue with a housing end cap that incorporates a strain relief. (for those unclear of what that is, It's a tapered, accordion shaped rubber part that supports the housing , allowing gradually more flex as the housing gets further from the stop.)
-It comes in their newest cable sets, the "universal sport brake xl" model. Called "anti kink end caps", their intent is actually for use on folding bikes.


Top
   
PostPosted: Mon Mar 11, 2013 1:46 pm 
Offline

Joined: Mon Dec 28, 2009 8:30 pm
Posts: 5103
Location: Bay Area
I have a 58

Yah it seems no matter how I trim the housing that it ends up eating the outer housing up at the joint. I'll look for that Jagwire end cap. It doesn't hurt braking, its just really annoying.

_________________
Don't take me too seriously.
Gramz
Strava


Top
   
PostPosted: Mon Mar 11, 2013 5:04 pm 
Offline

Joined: Fri Mar 09, 2007 1:26 am
Posts: 544
Location: USA
I have set up many 58's with no issue. The front will have no ferrule on the housing going into the frame. The rear should have a furrule stop that is loose in the frame very small black piece that just sits in the frame. The cable and housing that comes out of the top tube side will NOT need a ferrule. Hope this helps.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot], numbers505 and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited