Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Mon May 02, 2016 2:02 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Sat Mar 09, 2013 11:59 pm 
Offline

Joined: Fri Dec 30, 2011 10:02 pm
Posts: 74
I'm getting ready to recable my race bike, which currently has Yokozuna installed. It shifts fine, but weighs a ton. I've thought about going to one of the link-based systems to drop some weight (Aican, specifically), but I understand they can get knocked out of "shape". When that happens, does it affect shift/brake performance?

_________________
__________
Seven 622 SLX
Cannondale CAAD9
Merckx Premium (in progress)
Blue CXc


Top
   
PostPosted: Sun Mar 10, 2013 1:53 am 
Offline
User avatar

Joined: Mon Dec 21, 2009 6:00 am
Posts: 440
Location: Bay Area, CA
FastforaSlowGuy wrote:
I'm getting ready to recable my race bike, which currently has Yokozuna installed. It shifts fine, but weighs a ton. I've thought about going to one of the link-based systems to drop some weight (Aican, specifically), but I understand they can get knocked out of "shape". When that happens, does it affect shift/brake performance?


I don't find that it does. When I first set up my TT bike, the rear Nokon loop would actually flop down so that it would loop upwards to the derailleur. I wouldn't notice anything until I looked down. Some zip ties fixed it. Even if they are a bit weird, usually the tension/release keeps things in smooth enough order that you don't notice anything.


Top
   
PostPosted: Sun Mar 10, 2013 3:16 am 
Offline

Joined: Sun Jul 29, 2012 12:49 am
Posts: 427
I think as long as you keep the links snug against each other, they'll maintain their shape. I'm using Aicans and have them on relatively tight bends -- they seem to be holding up.


Top
   
PostPosted: Sun Mar 10, 2013 12:50 pm 
Offline

Joined: Fri Dec 24, 2010 9:37 pm
Posts: 786
Location: it's raining, it must be uk
i use nokon/powercordz (with powercordz liner), haven't noticed any performance change with cable position, the lack of cable stretch and housing compression made the shifting much snappier than the gore ride-on they replaced


Top
   
PostPosted: Sun Mar 10, 2013 12:53 pm 
Offline

Joined: Mon May 21, 2012 2:32 pm
Posts: 75
Absolutely no problems with iLink provided they were installed nice and snug.


Top
   
PostPosted: Sun Mar 10, 2013 9:43 pm 
Offline

Joined: Sat Jul 30, 2011 6:38 pm
Posts: 361
I had a little trouble making the bend from a DA shifter into a Vukasprint bar. The links separated while snaking cable around and when they came back together it wasn't perfect and the segmented liner got munched and ended up binding the cable. A quick tip is that I now take the length of segmented housing that I will either have under the bar tape, or that passes internally in a bar with internal routing (this is actually fairly important because if you pull the cable nothing is holding the links together and you have a bar full of loose links), drop them on a spare cable with the appropriate end piece compress them and wrap them in a layer of electrical tape. This keeps them compressed in an area that is difficult to work, with especially around curves. It also makes changing cable much much easier.
You can even continue this out to the cable stops and then cut the electrical tape off after the bike is fully cabled.
The other important thing with these and the Alligator is to be really gentle with the liner. It is much easier to get the liner right with the Aican as it is segmented but you still need to watch it carefully. A kink or too hard a pull or squeeze on the Alligator liner and it will never shift right.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Jagwire elite road link v.s AICAN-Bungarus

in Road

in8402048

13

647

Thu Apr 21, 2016 5:00 am

mpulsiv View the latest post

There are no new unread posts for this topic. how much does the bike weight matter at the elite level?

[ Go to page: 1 2 ]

in Road

spectastic

22

1487

Mon Apr 04, 2016 2:41 pm

wheelsONfire View the latest post

There are no new unread posts for this topic. U shape/toroid profile aluminium

[ Go to page: 1 2 3 ]

in Road

mpulsiv

43

2235

Wed Feb 17, 2016 10:59 pm

Multebear View the latest post

There are no new unread posts for this topic. Saddle shape comparison/question

in Road

floriansantana

5

680

Tue Mar 08, 2016 1:48 pm

verbs4us View the latest post

There are no new unread posts for this topic. How to mount the Alligator iLink?

in Road

REDUTOPIA

1

252

Wed Mar 16, 2016 9:42 pm

RyanH View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Baidu [Spider], Bing [Bot], DeRibble, dunMisk, Majestic-12 [Bot], shonanmike and 29 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited