Berk PROTO-TYPE Composites
Moderators: MrCurrieinahurry, maxim809, Moderator Team
-
- Posts: 978
- Joined: Sat Nov 10, 2007 4:23 am
- Location: Poland/Toronto
- Contact:
Count me in too
Chris.
Chris.
Orbea Oiz - xxxx
MSC Koncept Carbon Di2 - 6955g
Leichtkraft Team Carbon - 6868g.
MSC Koncept Carbon Di2 - 6955g
Leichtkraft Team Carbon - 6868g.
Well, if I get a tube like this I could make it, but it's expensive.
Maybe I'll try to improve my tubing, but it's a process and I'll see what can I make (I do have a a short part of that tube se I can see how they make it ). At this moment I don't dare yet to make a 40g tube (270mm long).
Also the saddle shell helps to lose some more weight, compared to the SLR shape it's almost 7g lighter only because the shape that allows a lighter layup.
Maybe I'll try to improve my tubing, but it's a process and I'll see what can I make (I do have a a short part of that tube se I can see how they make it ). At this moment I don't dare yet to make a 40g tube (270mm long).
Also the saddle shell helps to lose some more weight, compared to the SLR shape it's almost 7g lighter only because the shape that allows a lighter layup.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
I haven't had one of your seatposts in my hands yet, but can tell you I already trust your skills more then Schmolke. I had one of there seatposts and broke it. They agreed it wasn't broke because of overtorque but couldn't offer me a replacement because they "calculated all forces" on the seatpost and they couldn't break in normal conditions.
So keep up the good work! If my budget allows i definetly buy one of your combo's!
So keep up the good work! If my budget allows i definetly buy one of your combo's!
Thanks!
Well, hopefully this tube will hold well. I'll really have to experiment a bit more with the tubing!
Dennis wrote:/...They agreed it wasn't broke because of overtorque but couldn't offer me a replacement because they "calculated all forces" on the seatpost and they couldn't break in normal conditions.
Well, hopefully this tube will hold well. I'll really have to experiment a bit more with the tubing!
A new project, after many many hours in SolidWorks, finaly finished! Also the moulds are designed and next step is to make them on CNC,...
I made it together with a friend of mine (www.gorjupdesign.si), a professional designer who works also for different companies, he's a real master of SolidWorks. Here osme photos during the SolidWorks work:
My aim for this saddle is to make it as light as possible and of course more comfortable than my one piece seatpost/saddle combos. The saddle has an unique design of the saddle rails - the saddle will be made in 2 steps (bonding the saddle rails and saddle shell), without any extra reinforcements between the saddle shell and saddle rails.
So here it is:
I think that I already mentined - we had a leather company in our family, so I'll be able to make some leather work again and cover some saddles,...as you can see the "bridge" on the back side of the saddle would be visible also if I cover the complete saddle with leather...we'll see, first I have to get the moulds and then make some first prototype saddles, can't wait! I'll keep you updated.
Otherwise I'm very busy with my university these days, but I'll soon have some more news, the ultralight combo is almost finished..
I made it together with a friend of mine (www.gorjupdesign.si), a professional designer who works also for different companies, he's a real master of SolidWorks. Here osme photos during the SolidWorks work:
My aim for this saddle is to make it as light as possible and of course more comfortable than my one piece seatpost/saddle combos. The saddle has an unique design of the saddle rails - the saddle will be made in 2 steps (bonding the saddle rails and saddle shell), without any extra reinforcements between the saddle shell and saddle rails.
So here it is:
I think that I already mentined - we had a leather company in our family, so I'll be able to make some leather work again and cover some saddles,...as you can see the "bridge" on the back side of the saddle would be visible also if I cover the complete saddle with leather...we'll see, first I have to get the moulds and then make some first prototype saddles, can't wait! I'll keep you updated.
Otherwise I'm very busy with my university these days, but I'll soon have some more news, the ultralight combo is almost finished..
-
- Posts: 31
- Joined: Wed Dec 12, 2012 5:55 pm
Nice saddle there Berk! a fan of your works.
What are the measurements of the saddle? Is it inspired by the Toupe 143mm?
It's online again:The Machinist
My CAAD10:http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=109014
My CAAD10:http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=109014
If I'm honest I didn't had the Toupe in my hands yet, so I don't know, but it's similar to the SLR shape. So all riders who are used to that shape, or similar, shouldn't have any problems with this saddle.
This one is 130mm wide, but if there will be more request for a wider saddle I could make it later, wouldn't be a problem at all. First I'll make the moulds for this saddle and a few prototypes, and then see how to continue.
This one is 130mm wide, but if there will be more request for a wider saddle I could make it later, wouldn't be a problem at all. First I'll make the moulds for this saddle and a few prototypes, and then see how to continue.
- RoadManiac
- Posts: 48
- Joined: Sat May 23, 2009 4:51 pm
Berk wrote:So here it is:
Berk, you're not normal,wonderful work.
One death is a tragedy- a million death is statistic.
Thanks @RoadManiac
I calculated that it should have around 78g, but it's to early to confirm it. First I'll have to make a few prototype saddles and test them etc.,...
I'll most probably use also some new materials for this saddle - hybrid carbon / innegra s:
First I have to do some more experiments etc.,..I'll keep you updated!
I'll most probably use also some new materials for this saddle - hybrid carbon / innegra s:
First I have to do some more experiments etc.,..I'll keep you updated!
My aim for this saddle is to make it as light as possible and of course more comfortable than my one piece seatpost/saddle combos. The saddle has an unique design of the saddle rails - the saddle will be made in 2 steps (bonding the saddle rails and saddle shell), without any extra reinforcements between the saddle shell and saddle rails.
So here it is:
I think that I already mentined - we had a leather company in our family, so I'll be able to make some leather work again and cover some saddles,...as you can see the "bridge" on the back side of the saddle would be visible also if I cover the complete saddle with leather...we'll see, first I have to get the moulds and then make some first prototype saddles, can't wait! I'll keep you updated.
Otherwise I'm very busy with my university these days, but I'll soon have some more news, the ultralight combo is almost finished..[/quote]
Awesome. looks similar in shape to the Dash saddle I sent you for repair recently. Also reminds me of e Ax Lightness Leaf saddle.
If we can customize the width (ie. wider) of the saddle, I'll be the 1st in queue for them!!
So here it is:
I think that I already mentined - we had a leather company in our family, so I'll be able to make some leather work again and cover some saddles,...as you can see the "bridge" on the back side of the saddle would be visible also if I cover the complete saddle with leather...we'll see, first I have to get the moulds and then make some first prototype saddles, can't wait! I'll keep you updated.
Otherwise I'm very busy with my university these days, but I'll soon have some more news, the ultralight combo is almost finished..[/quote]
Awesome. looks similar in shape to the Dash saddle I sent you for repair recently. Also reminds me of e Ax Lightness Leaf saddle.
If we can customize the width (ie. wider) of the saddle, I'll be the 1st in queue for them!!
Thanks!
I'll keep you updated about the saddle project. Otherwise it's no problem to make a wider saddle, but I'll see as soon as I make some first saddles that are 130mm. If I'll be financially able I'll invest also for a wider saddle / mould for it.
Just finished "the ultimate combo":
84,8g
I'll keep you updated about the saddle project. Otherwise it's no problem to make a wider saddle, but I'll see as soon as I make some first saddles that are 130mm. If I'll be financially able I'll invest also for a wider saddle / mould for it.
Just finished "the ultimate combo":
84,8g
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 2305
- Joined: Tue Aug 02, 2011 9:20 pm
- Location: New Zealand
Loving the new saddle design. I ride an SLR on the road and a 130 Toupe on the CX. I love both so something like this new design would be great.