Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Wed Sep 28, 2016 2:42 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Pinarello Dogma ?'s
PostPosted: Fri Mar 08, 2013 1:27 am 
Offline

Joined: Fri Mar 09, 2007 1:26 am
Posts: 558
Location: USA
I hope someone can help me out. I work in a shop that services quite a few bikes and have never worked on a Pinarello before. I have a friend bringing in a 2011 Dogma and it needs new headset bearings. When I pulled the fork off, the bearing was stuck on the crown race.. is that typical? Are the headset bearing pressed in or not? What headset bearing do I need for this Pinarello Dogma. Thanks in advance for the help. :beerchug:


Top
   
 Post subject: Pinarello Dogma ?'s
Posted: Fri Mar 08, 2013 1:27 am 


Top
   
 
 Post subject: Re: Pinarello Dogma ?'s
PostPosted: Fri Mar 08, 2013 12:14 pm 
Offline

Joined: Fri Mar 09, 2007 1:26 am
Posts: 558
Location: USA
Would someone pls help me on the bearings. Thanks :unbelievable:


Top
   
 Post subject: Re: Pinarello Dogma ?'s
PostPosted: Fri Mar 08, 2013 1:11 pm 
Offline

Joined: Tue Jan 11, 2005 11:40 pm
Posts: 863
Location: Eire
From the www

Pinarello uses a proprietary internal bearing for all their current frames. All upper bearings for these headsets are 1 1/8". Non-tapered headtubes use the same sized 1 1/8" bearing on the bottom. Tapered headsets require a 1 1/4" bearing on the bottom in addition to the 1 1/8" bearing on the top .... $29.99 each Add to CART

Note exceptions - The Dogma FPX frame, a Pinarello Magnesium model, was offered for just 1 year and uses the standard 1 1/8" bearing on the top (order above), but uses a special 1.5" bearing on the bottom that must be special ordered.

I haven't worked on Pinarellos but I doubt the bearing is pressed on. Its more likely corroded and sticking as a result. However, I'm sure Pinarello owners can clarify.

_________________
Not everything that counts can be counted. Not everything that can be counted counts.


Top
   
 Post subject: Re: Pinarello Dogma ?'s
PostPosted: Fri Mar 08, 2013 1:16 pm 
Offline

Joined: Fri Feb 18, 2011 8:33 am
Posts: 141
I have a 2011, and have removed the fork, the bearings were definitely not stuck on the steerer, they remained in the headtube though (as expected I suppose)


Top
   
 Post subject: Re: Pinarello Dogma ?'s
PostPosted: Fri Mar 08, 2013 1:17 pm 
Offline

Joined: Sat Jul 29, 2006 2:36 am
Posts: 1236
Location: UK
Found this old thread. Hope this helps

http://weightweenies.starbike.com/forum/viewtopic.php?f=3&t=23649&start=0

In the back of my mind I thought it might be glued but couldn't find anything.


Top
   
 Post subject: Re: Pinarello Dogma ?'s
PostPosted: Fri Mar 08, 2013 7:45 pm 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
The bearing is a light interference fit. On older ones, the fork crown would look hand-filed(!) to create the fit. Sometimes the bearing stays on the fork...


Top
   
 Post subject: Re: Pinarello Dogma ?'s
PostPosted: Fri Mar 08, 2013 10:54 pm 
Offline

Joined: Fri Mar 09, 2007 1:26 am
Posts: 558
Location: USA
Thanks for the help guy's. Looks like specific bearings for that frame set.


Top
   
 Post subject: Re: Pinarello Dogma ?'s
Posted: Fri Mar 08, 2013 10:54 pm 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. pinarello dogma 65.1 crack or paint ??

in Road

mikemon

8

892

Thu Jan 28, 2016 7:50 pm

muntos View the latest post

There are no new unread posts for this topic. Question on Magnesium Pinarello Dogma FP

in Road

mtdetermine

5

483

Sun May 22, 2016 2:42 pm

pdlpsher1 View the latest post

There are no new unread posts for this topic. trek madone 9.9 vs pinarello dogma 65.1

in Road

mikemon

12

1749

Fri Sep 23, 2016 3:37 pm

ergott View the latest post

There are no new unread posts for this topic. Pinarello Dogma BB/ crank compatibility

in Road

snowdevlin

12

954

Sun Sep 25, 2016 12:02 pm

Valbrona View the latest post

There are no new unread posts for this topic. Pinarello Dogma 65.1 vs Cipollini RB1000

[ Go to page: 1 2 ]

in Road

sk8andrace

15

3029

Thu Jan 14, 2016 9:07 am

Skunkworks View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: AZK, benzebub, caballero, Exabot [Bot], fabriciom, mattyNor, Mike V, nestornnk, rajMAN, Rascal, TurboTommy and 35 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited