Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Sat Apr 30, 2016 10:09 am

All times are UTC+01:00





Post new topic  Reply to topic  [ 26 posts ]  Go to page Previous 1 2
Author Message
PostPosted: Fri Mar 08, 2013 3:46 am 
Offline

Joined: Mon Feb 18, 2008 9:47 pm
Posts: 261
Location: CA
The "bulgy" sleeve is indeed a Trek part and not a Shimano part.

From the factory, the SMBTR2 battery does not come with any type of adapter.

I used an o-ring around the battery, shoved it into the seatpost of my TCR (aero seatpost) and then made up the difference with packing foam - work's just fine.

_________________
Turn down the suck knob.


Top
   
PostPosted: Fri Mar 08, 2013 4:53 am 
Offline

Joined: Sat Mar 10, 2012 1:00 pm
Posts: 22
Can this battery be charged through the "old" style junction box jc-4x if I disconnect a cable, or must this be through the new Ew-90-x models? Sorry if this is explained elsewhere I'm confused. Thanks.


Top
   
PostPosted: Fri Mar 08, 2013 7:07 am 
Offline

Joined: Tue Dec 15, 2009 3:09 pm
Posts: 142
The charging port on the new junction box is some type of USB port separate from the other plugs. The charger does not plug into one of the cable ports. So you need one of the new junction boxes. Also need to update firmware.


Top
   
PostPosted: Fri Mar 08, 2013 10:04 am 
Offline

Joined: Sun Mar 27, 2011 8:16 pm
Posts: 437
Battery, AKA round hole:

Image

Charger, AKA square peg:

Image
Image

As far as I can see there is absolutely no way to connect the internal battery charger to the internal battery itself, you have to get the new junction box.

I've ordered the junction box from Bike24.net and will finally allow me to put everything together.


Top
   
PostPosted: Fri Mar 29, 2013 4:24 am 
Offline

Joined: Mon Dec 31, 2012 5:27 am
Posts: 46
Hi All,

i wondering if the following setups would work -

1) DIY or third-party charger
a) Cable Junction SM-EW67-A-E
b) Internal Battery SM-BTR2
c) Charger with DIY connector to plug into EW-SD50 cable
2) SM-BCR2 Charger
a) Cable Junction SM-EW67-A-E
b) Internal Battery SM-BTR2
c) SM-BCR2 Charger, with DIY adapter to plug into EW-SD50 cable

With setup 1, the cost is reduced by not using 1 x SM-EW90-A junction, 2 x additional EW-SD50 and 1 x SM-BCR2 Charger (substitute with 8.4V, 0.4A charger).
With setup 2, the cost is reduced by not using 1 x SM-EW90-A junction, 2 x additional EW-SD50. The OEM charger is used for firmware updates.

Both setups are based on the assumption that the SM-EW90-A junction does not have any circuitry. It seemed to be the case as charging with SM-PCE1 can be done at any exposed connection - http://www.youtube.com/watch?v=Bh7XoKQzJ6A. Besides cost saving, the advantage of this approach is no hacking to the OEM parts is required.


Top
   
PostPosted: Tue Apr 02, 2013 5:23 am 
Offline

Joined: Fri Sep 30, 2011 4:48 pm
Posts: 48
I just received the SM-BTR2 internal battery. To install in a seatpost, Shimano includes a plastic shim, some washers and a snap ring. These bits are only useful if your seatpost includes a Di2-ready/friendly sleeve.

I have an 27.2mm FSA K-Force seatpost from a stock Cannondale EVO Hi-Mod Di2 that includes such a sleeve. I don't know if FSA or Cannondale installed the sleeve, but it seems semi-permanent. Battery installation pics...

Image
Image
Image
Image
Image
Image
Image



Alternative #1: a little foam and zip ties: http://glorycycles.blogspot.com/2013/03/Ultegra-Di2-Internal-Battery-Conversion.html

Alternative #2: ask a Trek dealer to help procure this elegant rubber leaf spring: http://www.bikerumor.com/2013/01/10/closeup-look-at-shimano-dura-ace-di2-9070-internal-battery-more/


Top
   
PostPosted: Tue Apr 02, 2013 7:40 am 
Offline

Joined: Wed Jul 16, 2008 10:38 pm
Posts: 67
Location: North Wales
My LBS have just taken delivery of most of my Di2 parts. Apparently Shimano have specified how to design a seat post to hold the internal battery and secure it with the parts they supply. To date very few manufacturers have started to modify their seatposts to do this.

_________________
Riding my road bike in North Wales

http://www.strava.com/athletes/keith_robertson


Top
   
PostPosted: Tue Apr 02, 2013 8:13 am 
Offline

Joined: Fri Sep 30, 2011 4:48 pm
Posts: 48
here's a scale shot with the battery installed...

Image


Top
   
PostPosted: Tue Apr 02, 2013 8:29 am 
Offline

Joined: Mon Jan 21, 2008 12:09 pm
Posts: 2643
So, no more cutting down seatposts to save weight?


Top
   
PostPosted: Sun Jan 31, 2016 4:48 pm 
Offline

Joined: Sat Sep 19, 2009 12:23 pm
Posts: 58
Someone else ask this but I don't see an answer

Can you use the internal battery on a 2013 Cervelo S5?


Top
   
PostPosted: Sun Jan 31, 2016 5:45 pm 
Offline

Joined: Mon May 04, 2015 8:22 pm
Posts: 113
Where do you want to put it? It only fits In the seat down tube.


Sent from my iPhone using Tapatalk


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 26 posts ]  Go to page Previous 1 2

All times are UTC+01:00


Who is online

Users browsing this forum: Google Adsense [Bot], Yahoo [Bot] and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited