After seeing a picture of WW user Donald's bike, I asked him about his hoods, he responded that they were mtn bike innertubes. I've used heatshrink tubing w/ success and they lasted over a year, but once they move, they're pretty much done. This was cheap and easy enough to try.

No pics yet, but I picked up a 26in tube for 3.99, estimated a length and cut and then stretched it over the hood. Definitely needs to be shaped a bit, but it seems to hold perfectly and it's nice and thin (and weighs 7g as opposed to the stock sram hood at 34g). Even if it doesn't last all that long it takes only a couple of minutes to replace and with a tube costing 3.99 (and being able to make many, many hoods from that 1) this could be a real winner. Pics later, ride now!

_________________
Speedplay is the devil!

WW is alive and well

I'd like to see how this actually looks...

same here.

_________________
- AX Lightness Vial EVO D + DA9070 + Enve SES 3.4 Enve carbon hubs
- Parlee Altum + DA9070 + Enve 2.2 Enve carbon hubs
- Parlee ESX + DA9070 + Enve SES 4.5 CK hubs
- Independent Fabrication Ti FLW + Campy SR11 + Enve 3.4 CK hubs

+1

Can we see some photographic evidentiary material??

_________________
Mosaic RS-1
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=138478

Cielo by Chris King Cross Racer
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=134376

Hi,

We've seem this monkey trick before. Sorry.

Ciao,

_________________
Being a snob is an expensive hobby.

yuck fou? callin' a brutha out like that!

_________________
Speedplay is the devil!

have pics cannot post them -- nevermind, came up w/ workaround-- they ain't pretty, but they work perfectly as is- didn't move at all on my ride this afternoon in snowstorm and they did not have any negative effects on shifting nor braking. each one is
7-8g.

_________________
Speedplay is the devil!

Not the most ideal in terms of aesthetics but as far as WWism goes ... its well within acceptable limits as long as it functional and saves weight !!!

This may be just what I need to get under 6.8 for $-0-

_________________
Mosaic RS-1
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=138478

Cielo by Chris King Cross Racer
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=134376

There are different sizes of 26 inch tubes, also 24 inch tubes can be used, even 700 c tubes. Thinner tubes work better. They can also be trimmed a little once installed. Mine look more like original hoods. Also I have a little light weight padding just under the top of the hood, about 1 1/2 inchs long. With a thin tube used they can be very light and really are durable. If using a 700 c tube its best to use a very thin 700 x 32c tube.

Hi,





Sorry about that, just couldn't resist it.

How about latex inner tubes on those shifters? I dare you but won't suggest any brand of comdom in particular.
We'll leave that to other experts.

It would look kind of suggestive though.....

Ciao,

_________________
Being a snob is an expensive hobby.

The ribs may would help with grip.....

_________________
Mosaic RS-1
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=138478

Cielo by Chris King Cross Racer
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=134376

The choice for discriminating WW's is obvious. AX Lightness, of course.



Well, I don't thinks it's ribbed, but a WW does have to make some sacrifices.

Hi,

An open door perfectly kicked in by a local troubadour.

"Geh mit Leichtigkeit durch Leben"........Catchy indeed.

Ciao,

_________________
Being a snob is an expensive hobby.