For my seatpost.
Its the same as this one
Its a bit roughed up where previous owner used a saddle bag on some long rides. I'd ideally like to strip it back to the carbon weave or plain carbon, not fussed as long as its black and not scuffed white. If it saves me £200 on a new one then I'll be happy.
What are my options?
Wet sandpaper? Grade?
Chemical stripper?
Thanks in advance.
Same process. There is a thread in the Road Index about it
viewtopic.php?f=3&t=83500&hilit=sharp+blade
Stripping advice
Moderator: robbosmans
- btompkins0112
- Posts: 2635
- Joined: Fri Feb 11, 2011 3:04 am
- Location: Mississippi
I would go with wet sanding....should come off rather easily.
Mosaic RS-1
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=138478
Cielo by Chris King Cross Racer
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=134376
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=138478
Cielo by Chris King Cross Racer
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=134376
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- btompkins0112
- Posts: 2635
- Joined: Fri Feb 11, 2011 3:04 am
- Location: Mississippi
You can use a clear coat if you want to have a gloss finish.
Mosaic RS-1
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=138478
Cielo by Chris King Cross Racer
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=134376
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=138478
Cielo by Chris King Cross Racer
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=134376