Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Thu May 05, 2016 9:22 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 20 posts ]  Go to page 1 2 Next
Author Message
 Post subject: New fork for TI frame
PostPosted: Wed Feb 27, 2013 6:35 pm 
Offline

Joined: Fri Dec 26, 2008 2:32 am
Posts: 146
Location: Mid. PA. USA
I am looking to upgrade the fork on my Dean TI bike. At the present time in is sporting a Ritchey pro fork from 2006.
I am seeing some light stress cracks were the drop outs are glued into the fork body. I am not sure if they are just in the finnish or into the carbon. So to be safe I will be replacing the fork in the next few weeks. This one has the alloy drop outs glued into the fork body. I am looking for a one piece fork. (No glued in drop outs).
This bike has a long HT so I need a 43degree fork with a steer tube of about 220cm. It will have a 10cm spacer below the stem and a 10cm spacer above the stem. It will be going into a standard TI king HS. I would also like straight fork legs as opposed to curved.
I would like a few options for a replacement.
ENVE 2.0 is at the top of my list. Any other I should look at?
Thanks
Skiezo


Top
   
PostPosted: Wed Feb 27, 2013 8:07 pm 
Offline

Joined: Fri May 21, 2010 3:08 am
Posts: 323
Location: Milton, Canada
Just putting in my vote for the Enve. I have one on my Ti bike and have been very pleased!


Top
   
PostPosted: Wed Feb 27, 2013 9:03 pm 
Offline

Joined: Sat Nov 10, 2007 9:51 pm
Posts: 416
I'd also have a look at the 3T Funda Team

http://www.3tcycling.com/forks/funda


Top
   
PostPosted: Wed Feb 27, 2013 10:23 pm 
Offline

Joined: Thu Mar 03, 2011 7:07 am
Posts: 91
ive owned the 3t fork. they dont look as nice in person. its actually an "aero" for and looks a bit funny (to me) from some angles. also the headset compression system is a little bit annoying. there is an alloy sleeve that you need to glue in. actually not a bad idea but you do need to let the epoxy dry over night before riding.

enve 1.0 would be my first choice.


Top
   
PostPosted: Thu Feb 28, 2013 12:30 am 
Offline
Administrator
User avatar

Joined: Sat Jun 19, 2004 11:08 am
Posts: 6693
Location: Urbana, Illinois
I love my Alpha Q GS 30 on my Lynskey R320. I know they are not made anymore and that is why I have a new one stashed.

Are the forks your considering the same dropout to crown length?

_________________
RESIDENT GRUMPY OLD MAN.


Top
   
PostPosted: Thu Feb 28, 2013 12:42 pm 
Offline

Joined: Wed Jun 09, 2010 10:44 am
Posts: 291
I've just gone enve1.0 on my litespeed archon Ti. fantastic upgrade.

_________________
...


Top
   
PostPosted: Thu Feb 28, 2013 2:02 pm 
Offline

Joined: Tue May 23, 2006 9:39 pm
Posts: 562
i had an Enve 2.0 on my Litespeed. one of the better upgrades on that frame. prior to...had a Reynolds Pro Ouzo with alloy steerer. the Enve felt like it dampened more road vibration.

_________________
- AX Lightness Vial EVO D + DA9070 + Enve SES 4.5 CK hubs
- Parlee Z5 SLi + DA9070 + Enve 3.4 Tune/Dash hubs
- Parlee ESX + DA9070 + Enve SES 6.7 CK hubs
- Independent Fabrication Ti FLW + Campy SR11 + Enve 3.4 CK hubs


Top
   
PostPosted: Thu Feb 28, 2013 4:32 pm 
Offline

Joined: Fri Dec 26, 2008 2:32 am
Posts: 146
Location: Mid. PA. USA
Juanmoretime wrote:
I love my Alpha Q GS 30 on my Lynskey R320. I know they are not made anymore and that is why I have a new one stashed.

Are the forks your considering the same dropout to crown length?


That is a great question?????
On my spec sheet from the build in 05 it lists the dropout to crown length as 372mm and 43degree rake.
All the forks I have found are 368mm in 43degree rake.
I can not find any spec on the alpha Q forks.

I did find this tho and I will be looking at it in more detail before I drop the $$$$$$
http://sheldonbrown.com/rinard/forklengths.htm" onclick="window.open(this.href);return false;

So will 4mm shorter make that much of a difference in the ride or handling?


Top
   
PostPosted: Thu Feb 28, 2013 4:54 pm 
Offline
Administrator
User avatar

Joined: Sat Jun 19, 2004 11:08 am
Posts: 6693
Location: Urbana, Illinois
The Alpha Q is 371mm and so is the THM fork. King does make a crown race that os 5mm taller than the standard but i think its fugly.

Will you notice? Maybe. You might also have to change the level of your bars.

_________________
RESIDENT GRUMPY OLD MAN.


Top
   
PostPosted: Thu Feb 28, 2013 9:30 pm 
Offline
User avatar

Joined: Thu Oct 26, 2006 8:54 pm
Posts: 463
Location: USA
4mm shorter axle to crown will correspond to an effective ~0.25 degree increase in head-angle. Whether that's something that you'll notice or care about only you can really answer. But unless you think the steering on your bike is already really fast, I'd say that you'll be fine with the change.

_________________
Enjoying my Funk


Top
   
PostPosted: Fri Mar 01, 2013 12:40 am 
Offline

Joined: Thu Mar 01, 2012 2:10 am
Posts: 303
Think about what sorts of rims and tires you want to use.

It was recommended to me that if I want to run 25c tires, go the Enve over the 3T. My Enve 2.0 fork will just fit Michelin Pro Optimum 25c on Hed Belgium 23 mm rims. I think the Michelin 25c tires are on the larger side, compared to a Continental for example.

I doubt you'd get enough clearance on a 3T fork to run that.


Top
   
PostPosted: Fri Mar 01, 2013 3:40 am 
Offline

Joined: Fri Dec 26, 2008 2:32 am
Posts: 146
Location: Mid. PA. USA
I found a NOS EDGE branded fork from an online retailer. It has a crown to dropout length of 371mm and a 43degree rake. So it is about as close as I can find spec wise to my existing fork. I run a 25 on the rear and a 23 on the front so clearance will not be a problem. I ordered it today so it should be here the middle of next week.
I have a EVNE 1.0 fork on my steel bike that I had built so I now of the quality of there products.

Thanks
Skiezo


Top
   
PostPosted: Fri Mar 01, 2013 4:06 am 
Offline

Joined: Tue Apr 27, 2010 2:36 am
Posts: 329
After 2 other carbon forks, I put an Enve 1.0 on my Merlin CR Works. I absolutely love it.


Top
   
PostPosted: Fri Mar 01, 2013 4:19 am 
Offline

Joined: Thu Aug 11, 2011 6:36 pm
Posts: 43
I've only ever had the chance to ride the funda, but I've always been green for the enve.


Top
   
PostPosted: Fri Mar 01, 2013 10:15 am 
Offline
Tinker, Taylor, Tart
User avatar

Joined: Sat Nov 29, 2008 8:00 pm
Posts: 1793
Location: Sydney, 'straylia
Pegoretti Falz.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 20 posts ]  Go to page 1 2 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Does a System Six fork fit in a Evo frame?

in Road

Multebear

1

464

Sun Jul 19, 2015 8:40 pm

topflightpro View the latest post

There are no new unread posts for this topic. scott speedster s30 frame & fork weight

in Road

av520

2

235

Sun Dec 20, 2015 6:38 pm

av520 View the latest post

There are no new unread posts for this topic. Current Frame/Fork Combos Under 1,000g

[ Go to page: 1 2 3 4 ]

in Road

RyanH

46

5460

Fri Mar 18, 2016 12:21 pm

wheelsONfire View the latest post

There are no new unread posts for this topic. Which Dedacciaistrada fork

in Road

Body

0

262

Thu Jun 04, 2015 3:06 pm

Body View the latest post

There are no new unread posts for this topic. Enve 2.0 Fork

[ Go to page: 1 2 ]

in Road

beatle

17

1069

Sun Jan 10, 2016 1:32 pm

beatle View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: 4ibanez, Baidu [Spider], CBJ, defride, Ekorre, Enda Marron, Google [Bot] and 47 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited