Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Sun Dec 11, 2016 3:07 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Tue Feb 19, 2013 5:00 am 
Offline

Joined: Tue Jan 26, 2010 1:14 am
Posts: 23
PK01T Model

Spec is 162g

$260

I wonder if they use durable that some people comment

http://www.hti-pedals.com/ht_portal/pro ... tCname=pro


Attachments:
제목 없음.jpg
제목 없음.jpg [ 57.74 KiB | Viewed 2075 times ]
Top
   
PostPosted: Tue Feb 19, 2013 10:56 am 
Offline
User avatar

Joined: Sun Jun 12, 2005 10:56 am
Posts: 2673
Location: New Zealand
More people would ride these if they didn't achieve the low weight by using a DU bush against a Ti spindle. Like Exustar and others that use the same basic design, they will have too much drag and wear at an increasingly alarming rate once the TiN coating on the spindle is worn away. Sadly, the TiN loss takes about 2 rides......and the pedals need the bin within a year. By that reckoning, you are better off with a set of Time ULteams......about 10g heavier but last such a long time and have a very low drag/bearing resistance design.

_________________
Updated: Racing again! Thought this was unlikely! Eventually, I may even have a decent race!
Edit: 2015: darn near won the best South Island series (got second in age
-group)..woo hoo Racy Theremery is back!!


Top
   
Posted: Tue Feb 19, 2013 10:56 am 


Top
   
 
PostPosted: Tue Feb 19, 2013 3:19 pm 
Offline
Shop Owner
User avatar

Joined: Wed Aug 04, 2004 9:18 pm
Posts: 242
theremery wrote:
More people would ride these if they didn't achieve the low weight by using a DU bush against a Ti spindle. Like Exustar and others that use the same basic design, they will have too much drag and wear at an increasingly alarming rate once the TiN coating on the spindle is worn away. Sadly, the TiN loss takes about 2 rides......and the pedals need the bin within a year. By that reckoning, you are better off with a set of Time ULteams......about 10g heavier but last such a long time and have a very low drag/bearing resistance design.

sorry to hijack thread ,What do you think of the Time Xpresso 12 Titan Carbon Pedals ?

_________________
http://www.motomatt.com/?p=3831
http://gallery.motomatt.com/v/My+Mountain+Bikes/Trigon+MQC05+Full+Carbon+Bike+15lb+89oz/IMG_1893.JPG.html
http://www.strava.com/athletes/motomatt


Top
   
PostPosted: Tue Feb 19, 2013 4:25 pm 
Offline

Joined: Tue Jun 23, 2009 10:47 pm
Posts: 227
Searching "Xpresso" would have returned this thread: viewtopic.php?f=3&t=111827


Top
   
PostPosted: Tue Feb 19, 2013 5:22 pm 
Offline
Shop Owner
User avatar

Joined: Wed Aug 04, 2004 9:18 pm
Posts: 242
Estelja wrote:
Searching "Xpresso" would have returned this thread: viewtopic.php?f=3&t=111827" onclick="window.open(this.href);return false;

I wanted to get theremery's opinion.

_________________
http://www.motomatt.com/?p=3831
http://gallery.motomatt.com/v/My+Mountain+Bikes/Trigon+MQC05+Full+Carbon+Bike+15lb+89oz/IMG_1893.JPG.html
http://www.strava.com/athletes/motomatt


Top
   
PostPosted: Tue Feb 19, 2013 5:50 pm 
Offline

Joined: Tue Feb 05, 2013 8:29 pm
Posts: 236
I always wondered why more weight weenies don't go with Bebops. Cromo pedals plus titanium replacement spindles comes in around $150 and weigh the same as Speedplay Nanogram Zeros. I guess they're not for people that don't like floaty pedals, but they sure hit the sweet spot for price:weight:performance. Good quality bearings too, none of this durant bushung nonsense. The big thing though is that I don't have to have two different sets of pedals for my bikes--they're light and solid enough for race pedals, and cheap and walkable enough for casual bike shoes.

The one thing that the HT pedals have going for them is that they're LOOK compatible, which means you have plenty of cleats readily available. That durant bushing, though, gives me pause. At that point you might as well just go all out and get those pedals that are just titanium spindles with a durant sleeve.


Top
   
PostPosted: Wed Feb 20, 2013 7:01 am 
Offline
User avatar

Joined: Sun Jun 12, 2005 10:56 am
Posts: 2673
Location: New Zealand
Yeah....sorry but I can't comment on the xpressos, or the iClics. I hear the 1st generation iClics are NOT good but know nothing of the xpresso model. The ones I'd recommend are the old RXS if you are on a budget, carbon Ti if you are patient (to get a good pair second hand.....or cheap via NOS, ) or Ulteams for the weight weenies who want to search. Check you don't use them with a pair of "ridged" cleats* (the brass bit can develop a ridge if you run them under constant twisting load if you set them up a bit out of alignment with your natural foot position) but otherwise these pedals last a mighty long time and the Ti spindled ones are light.
.
[* doing this causes the cleat to make the little u-shaped bars the cleat engages into work loose over time]

_________________
Updated: Racing again! Thought this was unlikely! Eventually, I may even have a decent race!
Edit: 2015: darn near won the best South Island series (got second in age
-group)..woo hoo Racy Theremery is back!!


Top
   
PostPosted: Wed Feb 20, 2013 7:47 am 
Offline
User avatar

Joined: Wed Oct 31, 2007 10:32 pm
Posts: 8351
Location: Los Feliz, Los Angeles, California
sigismond0 wrote:
I always wondered why more weight weenies don't go with Bebops. Cromo pedals plus titanium replacement spindles comes in around $150 and weigh the same as Speedplay Nanogram Zeros. I guess they're not for people that don't like floaty pedals, but they sure hit the sweet spot for price:weight:performance. Good quality bearings too, none of this durant bushung nonsense. The big thing though is that I don't have to have two different sets of pedals for my bikes--they're light and solid enough for race pedals, and cheap and walkable enough for casual bike shoes.


BeBops are AWESOME for MTB or Casual, however to use them for road often means finding an adapter for road shoes, which adds to the weight, or use MTB shoes, which are heavier than road shoes... and this is weight weenies, so... :mrgreen:

But yes, agreed, love my BeBops... on my lockable bike and my MTB.

_________________
Exp001 || Other projects in the works.


Top
   
Posted: Wed Feb 20, 2013 7:47 am 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 8 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Problem with Shimano S-Phyre road shoes, loose cleat nut

[ Go to page: 1 2 3 ]

in Road

kkibbler

30

2020

Thu Dec 01, 2016 1:39 pm

goodboyr View the latest post

There are no new unread posts for this topic. Deda NEW 2017 Superleggera RS Components

in Road

Nitemare

7

1722

Thu Dec 01, 2016 7:39 pm

russianbear View the latest post

There are no new unread posts for this topic. Pedal Overhaul

in Road

Skunkworks

3

405

Mon Jan 25, 2016 9:15 am

Skunkworks View the latest post

There are no new unread posts for this topic. Pedal q-factor

in Road

superb

4

573

Thu Nov 03, 2016 9:21 pm

travs View the latest post

There are no new unread posts for this topic. Attachment(s) which road clipless pedal for occasional normal shoes?

[ Go to page: 1 2 ]

in Road

riochang

20

862

Wed Mar 09, 2016 6:32 am

Lelandjt View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: CLEAR, Google Adsense [Bot], lovemyway, Yahoo [Bot] and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited