Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Sun Aug 28, 2016 3:37 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 13 posts ] 
Author Message
 Post subject: 16 spoke hubs
PostPosted: Sat Feb 16, 2013 12:03 pm 
Offline

Joined: Fri Nov 21, 2008 11:23 pm
Posts: 228
Location: Mal Born, Oz.
I have a 16 spoke gipiemme rimmed wheelset doing nothing. The rims are al 40mm that weigh inxs of 610gms each.
I have often wondered if these 16 hole shimano hubs are worth building into some lightet carbon tubs.
I weigh 78kg and dropping and ride for fitness.
Could i have any opinions on this please?
Regards


Top
   
 Post subject: Re: 16 spoke hubs
PostPosted: Sat Feb 16, 2013 12:07 pm 
Offline

Joined: Fri Nov 21, 2008 11:23 pm
Posts: 228
Location: Mal Born, Oz.
Sorry i posted outside the appropriate thread. Please feel free to move this.


Top
   
 Post subject: Re: 16 spoke hubs
PostPosted: Sat Feb 16, 2013 12:30 pm 
Offline

Joined: Sat Jun 02, 2007 1:10 am
Posts: 1845
Location: Melbourne, Australia
Shimano and Campy build wheels up with 16 spokes-so I see no reason why you can't do it.

I'd suggest something deep so you get good rim stiffness to help spread the load over the spokes better. Have a look at the deep chinese rim thread.


Top
   
 Post subject: Re: 16 spoke hubs
PostPosted: Sat Feb 16, 2013 2:39 pm 
Offline

Joined: Thu Jul 26, 2007 10:24 pm
Posts: 1582
Location: Center of the Universe
A little off topic but you can pick up bontrager branded DT Swiss 16h hubs dirt cheap, practically free.
Those might be a better option to build around.

_________________
TIME RXR


Top
   
 Post subject: Re: 16 spoke hubs
PostPosted: Sat Feb 16, 2013 4:03 pm 
Offline
Tubbie Guru

Joined: Tue May 03, 2005 2:20 am
Posts: 5850
Location: Belgium
Hi,

Those wheels are very similar to the old Campagnolo Shamal, aren't they?
The Campa rims were quite a bit lighter though weighing 500g each. If the hubs of the Gipiemmes are from the same era then I'm pretty sure they'll weigh the proverbial ton, use no separators in the bearings and may be limited to 8 speed in case of Shimano freewheel version.
They can (could?) be converted to Campa 10/11S or Shimano Ultegra using a Corima (not sure Corima still manufactures it) or Novatech freewheel. You basically need to find out the axle diameter of the hubs. I think it's the same one as used in the lower-end Campa wheels, can't seem to remember exactly how much it was.

They do not ride too bad though. The old Shamals were and still are great wheels. No need to be afraid of the low spoke count either. Not sure what Gipiemme used but the Shamal came with Sapim CX spoke wich are very strong bladed spokes.

Hope this helps, ;)

_________________
Being a snob is an expensive hobby.


Last edited by fdegrove on Sun Feb 17, 2013 2:26 am, edited 1 time in total.

Top
   
 Post subject: Re: 16 spoke hubs
PostPosted: Sat Feb 16, 2013 7:37 pm 
Offline
in the industry

Joined: Sat May 12, 2012 7:25 pm
Posts: 2633
Location: Glermsford, Suffolk U.K
I'm sure a shamel rear rim is more than 500g. I weighed one recently and all I remember it was less than 550g. The hub was nearly 400g though!

16 spoke wheel will always have a heavy rims which is why I don't like them even though I like the look alot. If you the OP can find a suitable rim at the right price then why not give a go.

_________________
www.thecycleclinic.co.uk


Top
   
 Post subject: Re: 16 spoke hubs
PostPosted: Sat Feb 16, 2013 8:30 pm 
Offline
Tubbie Guru

Joined: Tue May 03, 2005 2:20 am
Posts: 5850
Location: Belgium
Hi,

As it happens I still have a bare rim in the cellar from a 16 spoke wheel. I guess I must have been lucky, it weighs 500g spot on.

Used to ride a 16R and 12F set Shamal occasionally many years ago. Fine wheels.

Ciao, ;)

_________________
Being a snob is an expensive hobby.


Top
   
 Post subject: Re: 16 spoke hubs
PostPosted: Sun Feb 17, 2013 12:11 am 
Offline

Joined: Thu Jun 14, 2012 3:01 pm
Posts: 86
I was given a Cosmic rear hub a bunch of years ago. 16h. I've been sitting on it trying to decide what to do with it.

Maybe an 80mm deep rim... Now that they're more affordable than the custom-drilled Zipps that were offered before we 'discovered' China.

M


Top
   
 Post subject: Re: 16 spoke hubs
PostPosted: Sun Feb 17, 2013 1:51 am 
Offline

Joined: Fri Nov 21, 2008 11:23 pm
Posts: 228
Location: Mal Born, Oz.
Hi guys
Thanx a lot for the optimistic replies.
Fdegrove you are spot on as the gipiemme aims are techno 416. While they do ride fine enough as i am still on a 90's steel bike i am interested in using the hubs with my 8 speed ultegra group.
At my weight what carbon rim depth would i be looking at 50-60mm?
Btw if anyone has a recommendation as to which exact rims I'd be extremely grateful.
They will be tubular...


Top
   
 Post subject: Re: 16 spoke hubs
PostPosted: Sun Feb 17, 2013 2:23 am 
Offline

Joined: Fri Nov 21, 2008 11:23 pm
Posts: 228
Location: Mal Born, Oz.
I should clarify that i think it best to go tubular with carbon rims unless someone has experience with deep clinchers with say basalt brake track.
Regards


Top
   
 Post subject: Re: 16 spoke hubs
PostPosted: Sun Feb 17, 2013 3:00 am 
Offline
Tubbie Guru

Joined: Tue May 03, 2005 2:20 am
Posts: 5850
Location: Belgium
Hi,

Gipiemme themselve have rims that could meet your demand (tub + basalt/cfk mix) but are just a tad deeper than the 416s at 40.5mm I think.

No idea on how to get a hold of them though.

Ciao, ;)

_________________
Being a snob is an expensive hobby.


Top
   
 Post subject: Re: 16 spoke hubs
PostPosted: Sun Feb 17, 2013 8:23 am 
Offline

Joined: Fri Nov 21, 2008 11:23 pm
Posts: 228
Location: Mal Born, Oz.
Thanx Fdegrove
I'll check it out. Lighter the better though


Top
   
 Post subject: Re: 16 spoke hubs
PostPosted: Mon Feb 18, 2013 12:19 am 
Offline

Joined: Tue May 31, 2011 9:48 pm
Posts: 244
Gregorio wrote:
A little off topic but you can pick up bontrager branded DT Swiss 16h hubs dirt cheap, practically free.
Those might be a better option to build around.


Gregorio, where can I find these hubs available? There are a few on ebay but they look old.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 13 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Duotrap S and wheel spoke interference

in Road

Skunkworks

11

584

Tue Feb 23, 2016 5:31 pm

Skunkworks View the latest post

There are no new unread posts for this topic. Attachment(s) looking for plastic spoke hole plugs

in Road

alanmclean

3

321

Sat Mar 05, 2016 3:29 pm

alanmclean View the latest post

There are no new unread posts for this topic. Carbon fibre spoke magnet bracket

in Road

SebK

0

230

Mon Sep 28, 2015 8:56 am

SebK View the latest post

There are no new unread posts for this topic. Roval Star Carbon Spoke Wrench

in Road

seahuston

1

383

Sat Dec 26, 2015 3:38 am

seahuston View the latest post

There are no new unread posts for this topic. Search: Lightweight wheel with broken spoke! To repair!

in Road

Carbonwork

0

352

Sat Apr 23, 2016 7:47 pm

Carbonwork View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot], Butcher, Google [Bot], James_London, kafkathedog, MSNbot Media, ride1970, thebucket, Yahoo [Bot] and 24 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited