Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Sun May 01, 2016 4:00 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed
- Tapatalk connection is currently broken

Those bugs will be fixed ASAP (next few days) as they are unfortunately more serious than expected.

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Sun Feb 17, 2013 6:54 pm 
Offline

Joined: Wed Aug 20, 2008 2:12 pm
Posts: 190
For the wheel builder experts.....if I was to switch a standard Reynolds Assault from Shimano to Campagnolo, any re-dishing required or it would be a straight swap of freehub?
Thank you


Top
   
PostPosted: Sun Feb 17, 2013 7:44 pm 
Offline

Joined: Sun Sep 21, 2008 9:07 pm
Posts: 1036
Location: Slovenia---that forest land
No - same freehub 10 or 11 speed campa

_________________
http://kavitec.blogspot.com/

click this! http://www.youtube.com/watch?v=0m8maAO-m-w


Top
   
PostPosted: Sun Feb 17, 2013 8:33 pm 
Offline

Joined: Thu Aug 23, 2012 11:19 pm
Posts: 195
Campy 10 to 11 requires no re-dish. However, most wheel companies do require a re-dish to go from Shimano to Campy. There are a few exceptions. Zipp and Fulcrum come to mind. Spinergy as well if I'm not mistaken. They dish all of their wheels for campy and have a larger gap between the frame and freehub when shimano freehubs are installed. Other companies, such as HED for example, prefer the not to have that large gap and therefor, shimano wheels are dished for shimano and campy wheels are dished for campy.


Top
   
PostPosted: Sun Feb 17, 2013 10:16 pm 
Offline

Joined: Wed Aug 20, 2008 2:12 pm
Posts: 190
Thank you. That's what I was thinking, worried about and the actual question....going from Shimano to Campagnolo. Reynolds mention a possible re-dishing...so more than likely would need one for a set of Assault. The price is really good...that's unfortunate.
:(


Top
   
PostPosted: Sun Feb 17, 2013 11:51 pm 
Offline

Joined: Thu Aug 23, 2012 11:19 pm
Posts: 195
Re-dishing is actually pretty simple. Most shops should be able to do it pretty quickly and cheaply, provided the nipples haven't seized. Aluminum nipples have a nasty habit of seizing to their steel spokes. Most modern, light wheels with alloy nipples suffer this fate eventually. So,, as long as the nipples are free and turnable, it's still a good deal.


Top
   
PostPosted: Tue Feb 19, 2013 9:44 pm 
Offline
in the industry

Joined: Sun Nov 21, 2004 2:45 pm
Posts: 2871
Location: London, UK
boolinwall wrote:
Campy 10 to 11 requires no re-dish. However, most wheel companies do require a re-dish to go from Shimano to Campy. There are a few exceptions. Zipp and Fulcrum come to mind. Spinergy as well if I'm not mistaken. They dish all of their wheels for campy and have a larger gap between the frame and freehub when shimano freehubs are installed. Other companies, such as HED for example, prefer the not to have that large gap and therefor, shimano wheels are dished for shimano and campy wheels are dished for campy.

And Mavic, any one who uses DT as well as Campagnolo. So basically the major players have designed their wheels to work either way. The rest are either micky mouse wheel manufacturers whose designs are a little half assed or, in the case of Shimano, so big they have no interest in cross-compatability


Top
   
PostPosted: Tue Feb 19, 2013 10:25 pm 
Offline

Joined: Sat Jan 09, 2010 12:07 am
Posts: 117
Location: Dublin, Ireland
I switched my Reynolds Assaults from Ultegra to 11 speed Super Record. AFAIK freehub change is all that I needed. I'll double check with my mechanic tomorrow.


Top
   
PostPosted: Wed Feb 20, 2013 3:36 am 
Offline

Joined: Wed Feb 04, 2009 5:37 am
Posts: 190
ultimobici wrote:
And Mavic, any one who uses DT as well as Campagnolo. So basically the major players have designed their wheels to work either way. The rest are either micky mouse wheel manufacturers whose designs are a little half assed or, in the case of Shimano, so big they have no interest in cross-compatability


I’m not sure that is entirely fair. Some companies purposely take/took advantage of the wider bracing angle S10 hubs could provide. (DT180 and possibly Alchemy). Others clearly view the changeability btwn Shimano and Campag as more important. Now with S11, I understand the bracing angle advantage will disappear, but someone may be able to correct me on that.


Top
   
PostPosted: Wed Feb 20, 2013 10:43 pm 
Offline

Joined: Thu Aug 23, 2012 11:19 pm
Posts: 195
I prefer all of my wheels to be spaced the same. So I've re-dished my Hed wheels for campy and adjusted the spacers to work with a shimano cassette. Without doing this, I needed to readjust the derailleur every time I switched from either my Zipp or Fulcrum wheels to my head ones. It'd be a lot easier if everyone just used the campy dish. But I understand from a strength point of view why they don't. Wheels dished for shimano 10 are stronger. However, I'm not convinced the extra 5% (not real numbers) of strength are worth the headaches.lol


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 9 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: Google Adsense [Bot], IDENTITAIRE, ms6073, MSNbot Media, numbers505 and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited