Hi Guys, I'm looking for a bit of help setting up my Sram Red Rear deralleur.
The Screw Limits seems to be fine (did the adjust acording with the sram manuals), b-limit screw also (setting up for get a 6mm distance), the longitude of the chain is also correct (acording with sram manuals), Im running it with a sram red 11-26 cassete with 2000 miles
The problem is if I adjust it with the chain in the big ring for a perfect out of noise in all the cogs setting, as soon as i put the chain in the small cog it seems to be fine in the cogs between 11 to 19, but when I try to put 21-23-26 it makes noise and have a hard time going up between cogs,, so puting more tension in the wire it fix the problem, but ... when i Put the chain back in the Big Ring now i have noises with most of the cogs.
Long History Short, adjusting the wire tension for dont have noises in the small ring makes the chain sound when I use the big ring and viceversa... teoricly if you setup it in the small or big ring, should keep the settings in both rings.
Thank u in advance