willier cento 1 superlagera bb question.

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Post Reply
User avatar
wshiong
Posts: 301
Joined: Tue Oct 12, 2010 4:00 pm
Location: MY

by wshiong

Any idea how to fit a. clavicula crank into this frame?

As shown at picture. Bb seems to be shorter.
Attachments
IMG-20130202-WA0002.jpg
IMG-20130202-WA0001.jpg
Passoni Mirror

Passoni Xxti

nlouthan
Posts: 188
Joined: Mon Jan 31, 2011 2:41 am
Location: SF Bay Area

by nlouthan

Is the Clavicula a regular BSA crank? If so, you need different bearings that press into the BB and a little plastic spacer/collars that go between the crank axle and the bearings. You can get the spacers from a Wilier dealer. The bearings are size 6805. If the crank is not a standard BSA, I don't think it will work.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



User avatar
wshiong
Posts: 301
Joined: Tue Oct 12, 2010 4:00 pm
Location: MY

by wshiong

Yes, its the standard bsa bb. The other photo shows 6806 bearing.

Now i concern about the length of the bb, it seems shorter then expected. the end part that the arm goes in are shorter.

Did you have any photo shows after installation? anyone done before?
Passoni Mirror

Passoni Xxti

thisisatest
Shop Owner
Posts: 1980
Joined: Sat Jun 13, 2009 4:02 am
Location: NoVA/DC

by thisisatest

It will not fit.


User avatar
wshiong
Posts: 301
Joined: Tue Oct 12, 2010 4:00 pm
Location: MY

by wshiong

too bad :evil:
Passoni Mirror

Passoni Xxti

YinYang
Posts: 43
Joined: Tue Dec 09, 2008 5:54 am

by YinYang

Hit up the guys @ twohubs.com; they managed to install the Clavicula on Wilier frames (Zero 7 & Cento Uno).


http://twohubs.com/news.aspx?showarticle=169

thisisatest
Shop Owner
Posts: 1980
Joined: Sat Jun 13, 2009 4:02 am
Location: NoVA/DC

by thisisatest

the Cento1 at Twohubs is the SR version. That, and the Zero7, have 386evo bb dimensions, for a 30mm spindle 86mm long. The original Cento1 is basically bb86/bb90, which is for a 24mm spindle. there's just not enough room on this one.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



User avatar
wshiong
Posts: 301
Joined: Tue Oct 12, 2010 4:00 pm
Location: MY

by wshiong

Our one is too short.. we already give up.
Passoni Mirror

Passoni Xxti

Post Reply