Building custom length axles.

View unanswered posts | View active topics

Board index » Discussion » Road

Building custom length axles.

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

Mattias Hellöre

Post subject: Building custom length axles.

Posted: Sat Feb 02, 2013 7:27 pm

in the industry

Joined: Fri Sep 23, 2005 6:34 pm
Posts: 495
Location: Insjön, SWEDEN

I finalized my glue fixture, in upcoming week I will make custom length axles for my fatbike and later for others.

Currently my fixture can take BOR XC666 , AX Morpheus and Hollowgram, these will be sent out to customers very soon.

Did a slight crosspost here and on MTB forum as I see it´s of interest for all in WW.

_________________
Experimental Prototype

Top

Mattias Hellöre

Post subject: Re: Building custom length axles.

Posted: Sun Feb 03, 2013 11:11 am

in the industry

Joined: Fri Sep 23, 2005 6:34 pm
Posts: 495
Location: Insjön, SWEDEN

Attachment:

Glue Fixture AX.jpg [ 54.07 KiB | Viewed 475 times ]

Here is a glue fixture for Ax Lightness Morpheus crank axle, my plan is to cut it up as close as to bearing surfaces and replace the cutted out part with carbon fiber tube.
This fixture is built with very close tolerance, with less than 0.1mm out of parallellism and less than 0.1mm clearance in hole before clamping down axle.

_________________
Experimental Prototype

Top

TimmS

Post subject: Re: Building custom length axles.

Posted: Sun Feb 03, 2013 12:31 pm

Joined: Mon Mar 28, 2011 6:46 pm
Posts: 139
Location: Amsterdam

Interesting, aside from custom length, what is the weight saving?

Top

Mattias Hellöre

Post subject: Re: Building custom length axles.

Posted: Sun Feb 03, 2013 12:56 pm

in the industry

Joined: Fri Sep 23, 2005 6:34 pm
Posts: 495
Location: Insjön, SWEDEN

I don´t know the exact weight saving on a Morpheus axle but on my earlier Hollowgram axles there was a signficant reduction in weight.

If I recall right a 132mm axle weighs 116 grams.

_________________
Experimental Prototype

Top

Page 1 of 1

[ 4 posts ]

Board index » Discussion » Road

Who is online

Users browsing this forum: Bing [Bot], Doolop, ferrarista, Google Adsense [Bot], kevhogaz, rowdysluggins, shoopdawoop, WMW and 46 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

	Author	Replies	Views	Last post
Building my own wooden disc wheel: what hub/axle to use? in Road	SWijland	5	940	Sat Dec 08, 2012 4:17 pm latman
Building urban Steel Bike single speed [ Go to page: 1, 2 ] in Road	JWolf	23	2235	Thu Aug 23, 2012 7:42 am ticou
spoke length in Road	thijsken	3	903	Sat Aug 18, 2012 9:10 pm thijsken
Dogma 2 seatpost length in Road	ParisCarbon	1	387	Fri Jun 15, 2012 9:23 pm cycleboyco
Chain length and new cassette in Road	Frankie13	6	426	Fri Jun 22, 2012 12:46 am Camilo