Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Wed Jun 01, 2016 6:52 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 16 posts ]  Go to page 1 2 Next
Author Message
PostPosted: Wed Jan 30, 2013 7:27 pm 
Offline

Joined: Fri Jun 19, 2009 12:03 pm
Posts: 130
Location: Denmark
Hi All,

I know, there are about 400.000 black-on-black Colnago's on this board and most of them are absolutely amazing! Also, most of them have cost an arm and a leg. This is a bit different in that the complete Di2 build will wind up around 4400 USD, which to me seems rather modest in this context, so I thought it worthwhile to do a write-up of the project. You're of course welcome to comment and come up with suggestions.

I've long (well always) wanted a Colnago and did especially like the EPS - something about those chainstays..but since a colnago frame with a build to match would be twice the cost of my car (admittedly a piece of junk) I've never had the opportunity - until now. I found a 2011 Colnago EPS Di2 specific frame in my exact size on ebay and won the bid at around 1/3 the price of a new frameset.From here it would have been easy to blow the bank and do a very expensive build, but since this is a winter project and I'm in no rush to finish it I decided to do a build exactly as i wanted - with the additional aim of not paying full retail for any part... so a sort of high-end (high end to me that is) budget build.

I'll update the thread with pics as the parts come in

Frameset
Colnago EPS Di2 specific, size 50s.

So why sloping? Well i'm 177 cm with 77 cm inseam - which means that my legs are extremely short compared to my height. On a normal geo frameset my post would be embarrasingly small. Ahem.

Wheels
All black Mavic R-sys SLR WTS, destickered (removed the yellow Mavic stuff). Because they look cool. Even if they loose the black anodization of the brake surface first time they're out in the rain. And I had them beforehand.

Challenge criterium skinwall tyres & Michelin latex tubes.

Carbonsports Lightweight Titanium QR

Drivetrain
Well some would say that Campagnolo would be the only 'correct' groupset on a colnago. I beg to differ for a couple of reasons:

- I'm not too fond of the aesthetics of the Campy EPS groups. The derailleurs look like mekano-sets and that big-ass control unit battery can't be properly hidden anywhere (on a bike at least).

- Campy EPS is just laughably expensive. Ha.

- I got hold of a lightly used Di2 groupset 7970 very cheaply. I actually like the loks of that group compared to Campag EPS and it has the added advantage compared to Campy EPS (and eTube Shimano... at least before 9070, but that battery is not in the wild yet) that you without too much fuss can hook up with a seatpost internal battery. So I've ordered one on ebay.

Cockpit
The weak spot for now... until 3T releases the Tornova i'm using a Thomson 100mm 10 degrees inverted stem and a 3T Ergonova bar. Also, I had that beforehand.

Misc
Moots King Cage Titanium bead blasted

Pics

Frameset

Image

Image

Image

Image

Image

_________________
Colnago EPS Di2
Vortrieb CX bike on a budget


Top
   
PostPosted: Wed Jan 30, 2013 8:59 pm 
Offline

Joined: Sun Dec 19, 2010 3:57 pm
Posts: 257
Hi Klingej,

It has all the makings of a good build - I cant believe the cost though - thats nearly the retail price of the frame alone - Well done. I will look forward to seeing the finished machine.... and when you say 'Winter build' you dont mean a new winter bike do you :lol: ??

Lig


Top
   
PostPosted: Wed Jan 30, 2013 10:25 pm 
Offline
User avatar

Joined: Tue Feb 02, 2010 4:22 pm
Posts: 1002
Location: Brooklyn
Frame looks amazing the build is brilliant and a master piece of a price - tillykke!


Top
   
PostPosted: Thu Jan 31, 2013 2:45 pm 
Offline

Joined: Sat Dec 13, 2003 2:25 am
Posts: 4713
Location: Canada
Ok, that's nice (the mid-century, Danish modern). Cute kid, too.

Oh, yeah. The Colnago EPS is fabulous, a favorite Colnago in my collection. Great choice.


Top
   
PostPosted: Thu Jan 31, 2013 3:17 pm 
Offline
User avatar

Joined: Tue Oct 23, 2012 3:16 pm
Posts: 29
Frame is very very attractive, but it seems too large for the boy, I think.

_________________
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=111575


Top
   
PostPosted: Thu Jan 31, 2013 3:57 pm 
Offline
User avatar

Joined: Mon Jan 10, 2005 10:47 am
Posts: 1072
Location: somewere floating between here and the other side
Good score !!
Chuck some britghly coloured hbar tape in if u wish to stand out !(;


Top
   
PostPosted: Thu Jan 31, 2013 8:04 pm 
Offline

Joined: Fri Jun 19, 2009 12:03 pm
Posts: 130
Location: Denmark
Thanks for commenting!

@lig: I think it'll be closer to 4500 USD actually. Have attached a pic of the parts prices, although i must admit that I've cheated a bit; i had some of the components beforehand, most notably the wheelset:

Image

And no, I'm happy to say I don't mean a winter bike - I've got an old Look 595 for that job, which it does quite nicely.


@CBJ: Tak for det :-)

@Geoff: I assume you men the Wegner Shell Chair in the other room - if so, thanks! It's surprisingly comfortable even if it doesn't look it. The kid's okay too - he's demonstrating a newfound interest in bikes by chewing on whatever bikepart he happens to get hold of :-)

@nijinsky510: his reach is surprisingly long. He seems to be able to grab hold of the most unlikely of things so I think it's just a matter of having the bike properly fitted to him.

@michel2: Yeah, i though about that, but i think that with the skinwall (tan sidewall? tanwall?) tyres it'll be a bit much with colored tape as well?

_________________
Colnago EPS Di2
Vortrieb CX bike on a budget


Top
   
PostPosted: Sun Feb 03, 2013 11:26 am 
Offline

Joined: Fri Jun 19, 2009 12:03 pm
Posts: 130
Location: Denmark
The parts have started trickling in so the build is coming along. The tan sidewalls work better than anticipated. I was a bit worried that using low profile rims would look silly with the frame tubes being so big, but the 'chunkiness' of the Mavics makes it look ok.

Image

_________________
Colnago EPS Di2
Vortrieb CX bike on a budget


Top
   
PostPosted: Sun Feb 03, 2013 12:42 pm 
Offline

Joined: Sun Jun 24, 2012 11:02 am
Posts: 379
Location: Danmark
All black and gumwalls is instant win! Looks great!

_________________
Tumblr
Instagram
Kaptajn Webstore


Top
   
PostPosted: Mon Feb 04, 2013 7:51 pm 
Offline

Joined: Mon Mar 01, 2010 8:07 pm
Posts: 757
Yes, that is right.
I like smart buyers and smart builds.
Look forward to the complete picture.

_________________
Kuota Kom Evo
viewtopic.php?f=10&t=111825&p=955235#p955235" onclick="window.open(this.href);return false;


Top
   
PostPosted: Mon Feb 04, 2013 7:57 pm 
Offline
User avatar

Joined: Fri Dec 09, 2005 9:39 am
Posts: 527
Location: Belgium
Nice one!
Are these clincher tires or tubulars? Which brand and type?

_________________
CANYON Ultimate AL 2010
CANYON Ultimate CF SL 2014
Instagram @coureurdusoleil


Top
   
PostPosted: Mon Feb 04, 2013 8:55 pm 
Offline
User avatar

Joined: Tue Apr 10, 2007 7:38 pm
Posts: 258
Location: Sweden
It looks nice :thumbup:

_________________
my 4053g - 8,935lbs Bike: viewtopic.php?f=10&t=98639


Top
   
PostPosted: Tue Feb 05, 2013 10:46 am 
Offline

Joined: Fri Jun 19, 2009 12:03 pm
Posts: 130
Location: Denmark
Thanks for the comments! The groupset has been held up in customs so I won't have it for another 4-5 days... :cry: But I'll make sure to post pics of hte finished build, hopefully during next week.

The tyres are clinchers, Challenge Criterium Open 700x23.

Br Jonas

_________________
Colnago EPS Di2
Vortrieb CX bike on a budget


Top
   
PostPosted: Tue Feb 05, 2013 12:37 pm 
Offline
User avatar

Joined: Thu Nov 29, 2012 12:36 pm
Posts: 240
Location: The Netherlands
Those wheels and tires


Top
   
PostPosted: Tue Feb 05, 2013 12:40 pm 
Offline
User avatar

Joined: Thu Nov 29, 2012 12:36 pm
Posts: 240
Location: The Netherlands
are super sweet.

Sorry for the double post. ;)


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 16 posts ]  Go to page 1 2 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Colnago C60 - new build

in Introduce Yourself / Gallery - Please use metric weights.

thebman

3

888

Wed Mar 23, 2016 3:42 am

thebman View the latest post

There are no new unread posts for this topic. Colnago C60 THNE build

in Road

Beancouter

10

1010

Sun Jan 24, 2016 11:29 pm

Beancouter View the latest post

There are no new unread posts for this topic. Colnago C60 PLBK Traditional 61 - Build Thread

[ Go to page: 1 2 3 ]

in Introduce Yourself / Gallery - Please use metric weights.

LorneMalvo

40

3326

Mon May 30, 2016 6:52 pm

LorneMalvo View the latest post

There are no new unread posts for this topic. New Colnago C60 build w Campy SR and ENVE wheels

in Introduce Yourself / Gallery - Please use metric weights.

thebman

11

1191

Tue Mar 22, 2016 7:59 pm

thebman View the latest post

There are no new unread posts for this topic. Pauline, my Colnago Extreme Power, new build w/ Campy EPS p3

[ Go to page: 1 2 3 ]

in Introduce Yourself / Gallery - Please use metric weights.

pritchet74

39

3911

Fri Apr 15, 2016 4:39 pm

pritchet74 View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Baidu [Spider], fitty4, GT56, MarginalChains and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited