Prolite Cuneo

Moderator: Moderator Team

Page 1 of 2

[ 16 posts ]

Go to page 1, 2  Next

Previous topic | Next topic

Author	Message
theosaurus	Post subject: Prolite Cuneo Posted: Wed Jan 30, 2013 4:18 pm
Joined: Mon Nov 07, 2011 8:02 pm Posts: 80 Location: England	Here's my cuneo, currently at about 7.9kg (with cassette). It's sort of a secondary/ weight weenie race bike, so on a bit of a budget. The target is sub 7kg, but I have no money atm. Looking for a cheap layback seatpost, any suggestions? more to come... Sorry for the shite photo _________________ yes, but how much does it weigh?
Top

Valbrona	Post subject: Re: Prolite Cuneo Posted: Wed Jan 30, 2013 5:52 pm
Joined: Fri Oct 28, 2011 3:25 am Posts: 689 Location: United Kingdom of Great Britain and Northern Ireland	Assuming the chain is threaded correctly through the rear mech, the chain is a little too long. Or is the cassette not fitted in that pic?
Top

Weenie	Post subject: Re: Prolite Cuneo Posted: Wed Jan 30, 2013 5:52 pm
Top

wojchiech	Post subject: Re: Prolite Cuneo Posted: Wed Jan 30, 2013 5:54 pm
Joined: Thu Feb 24, 2011 6:33 pm Posts: 249 Location: California	I don't see a cassette. I do that sometimes too when I want to stand up a bike and don't have a stand. _________________ strava / instagram
Top

theosaurus	Post subject: Re: Prolite Cuneo Posted: Wed Jan 30, 2013 8:43 pm
Joined: Mon Nov 07, 2011 8:02 pm Posts: 80 Location: England	Ah yes, there's no cassette in that Picture, but not for weight reasons _________________ yes, but how much does it weigh?
Top

paddyrider	Post subject: Prolite Cuneo Posted: Thu Jan 31, 2013 1:23 pm
Joined: Mon Oct 31, 2011 9:51 am Posts: 52 Location: NSW Australia	I like it! What bars are you using? Sent from my iPad using Tapatalk HD
Top

theosaurus	Post subject: Re: Prolite Cuneo Posted: Thu Jan 31, 2013 4:37 pm
Joined: Mon Nov 07, 2011 8:02 pm Posts: 80 Location: England	Thanks, the bars are fsa rd200, I got them for 20 quid of chain reaction and the only weigh 216g! _________________ yes, but how much does it weigh?
Top

paddyrider	Post subject: Prolite Cuneo Posted: Fri Feb 01, 2013 2:40 am
Joined: Mon Oct 31, 2011 9:51 am Posts: 52 Location: NSW Australia	theosaurus wrote: Thanks, the bars are fsa rd200, I got them for 20 quid of chain reaction and the only weigh 216g! Well done all round - that's good value for money. I like the look of the FSA classic bend - seems a fair bit deeper drop than the deda shallows. Might have to try them myself! Yep, bike looks very, very classy with those wheels and components. Sent from my iPad using Tapatalk HD
Top

theosaurus	Post subject: Pro-Lite rebuild Posted: Fri Oct 04, 2013 6:32 pm
Joined: Mon Nov 07, 2011 8:02 pm Posts: 80 Location: England	Just got my Cuneo frame back from shot blasting, not quite sure how to finish A) just glass paper B) steel wool C) polish D) ??? I would put a clear coat over any of these as I want a bare aluminium finish. Of course the aim is 7.6kg going on 6.8kg. Open to suggestion/snooty comments _________________ yes, but how much does it weigh?
Top

53x12	Post subject: Re: Pro-Lite rebuild Posted: Fri Oct 04, 2013 7:56 pm
Joined: Fri Sep 15, 2006 6:02 am Posts: 2043 Location: On the bike	Is it bad to think that I like the way it looks right now?
Top

LouisN	Post subject: Re: Pro-Lite rebuild Posted: Fri Oct 04, 2013 8:58 pm
Joined: Mon Feb 19, 2007 3:44 am Posts: 1638 Location: Canada	+1. Matte clear to protect finish . LOuis
Top

NGMN	Post subject: Re: Pro-Lite rebuild Posted: Fri Oct 04, 2013 10:11 pm
Joined: Mon May 30, 2005 7:13 am Posts: 1489	Any idea of weight before and after. This thread is timely as I was thinking about doing he same to my cyfac but leaving a panel of paint on the downtube.
Top

theosaurus	Post subject: Re: Pro-Lite rebuild Posted: Fri Oct 04, 2013 10:56 pm
Joined: Mon Nov 07, 2011 8:02 pm Posts: 80 Location: England	53x12: I think your right, I might just clear coat straight away it looks pretty good already I think I only saved around 50 grams but I would predict a cyfac's paint is a bit heavier _________________ yes, but how much does it weigh?
Top

prendrefeu	Post subject: Re: Pro-Lite rebuild Posted: Fri Oct 04, 2013 10:58 pm
Joined: Wed Oct 31, 2007 10:32 pm Posts: 7445 Location: Los Angeles	Mask off a design, polish only that part, then clear coat. _________________ Exp001
Top

theosaurus	Post subject: Re: Pro-Lite rebuild Posted: Sun Oct 13, 2013 6:24 pm
Joined: Mon Nov 07, 2011 8:02 pm Posts: 80 Location: England	Progress... _________________ yes, but how much does it weigh?
Top

Weenie	Post subject: Re: Pro-Lite rebuild Posted: Sun Oct 13, 2013 6:24 pm
Top

SWijland	Post subject: Re: Prolite Cuneo Posted: Mon Oct 14, 2013 7:29 am
Joined: Tue Aug 08, 2006 1:41 pm Posts: 817 Location: The Netherlands	Looking waaay better already. _________________ My Renovo R1 wooden bike project and the reason for my passion for all that is wood. Check it out: the most amazing vintage Colnago, Merckx and Pinarello collection
Top

Display posts from previous: All posts1 day7 days2 weeks1 month3 months6 months1 year Sort by AuthorPost timeSubject AscendingDescending

Page 1 of 2

[ 16 posts ]

Go to page 1, 2  Next