New Quarq?

View unanswered posts | View active topics

Board index » Discussion » Road

Page 2 of 2

[ 28 posts ]

Go to page Previous 1, 2

Print view

Previous topic | Next topic

Author

Message

MattSoutherden

Post subject: Re: New Quarq?

Posted: Tue Jan 29, 2013 11:20 am

Joined: Fri Jul 10, 2009 7:22 pm
Posts: 688
Location: London

Mike: Does the calibration work with o-symmetrics rings?

Also, do the BB30 Quarks have better heel clearance, in the same that normal bb30 cranks do over standard 86mm?

_________________
Snacking on carrot sticks - Where did it all go so wrong?
-
Finsbury Park CC

Top

Kasparz

Post subject: Re: New Quarq?

Posted: Tue Jan 29, 2013 11:31 am

Joined: Mon Jul 16, 2007 10:17 am
Posts: 585
Location: Latvia

Completely useless product (for me) without 180mm crank option.

Top

mieke@quarq

Post subject: Re: New Quarq?

Posted: Tue Jan 29, 2013 6:10 pm

in the industry

Joined: Sat Aug 23, 2008 9:44 pm
Posts: 44

iscarrr wrote:

mieke@quarq wrote:

That is correct, the ELSA powermeters do have the Exogram cranks whereas the SRAM Red are currently shipping with the regular carbon arms. The RIKEN will also have regular carbon arms when they ship in February.

Mieke
Quarq Technology

Mieke - Are the ELSA powermeters also shipping in February or are they ready to go now? Seems like there are some samples already around the place, e.g http://www.flickr.com/photos/glorycycle ... 414368663/" onclick="window.open(this.href);return false;

Thanks for the info.

The ELSA powermeters are available now. We have been shipping them for a week. The RIKEN powermeters will be shipping at the end of February.

Mieke
Quarq Technology

Top

OwenN

Post subject: Re: New Quarq?

Posted: Tue Jan 29, 2013 7:15 pm

Joined: Sat Dec 24, 2011 2:28 am
Posts: 32
Location: Roanoke, VA

I would like to know if I can purchase the new hollow carbon arms and install my older Quarq model on them. Anyone know if that will be possible?

Top

mieke@quarq

Post subject: Re: New Quarq?

Posted: Tue Jan 29, 2013 8:07 pm

in the industry

Joined: Sat Aug 23, 2008 9:44 pm
Posts: 44

OwenN wrote:

I would like to know if I can purchase the new hollow carbon arms and install my older Quarq model on them. Anyone know if that will be possible?

The new Exogram carbon arms will not be sold separately. They are only sold with the complete power meter setup.

Mieke
Quarq Technology

Top

cwdzoot

Post subject: Re: New Quarq?

Posted: Tue Jan 29, 2013 8:57 pm

Shop Owner

Joined: Sun Feb 20, 2005 5:17 am
Posts: 314
Location: Greenville, SC USA

Images here for those who want to see the crank.

_________________
Blog: http://glorycycles.blogspot.com/" onclick="window.open(this.href);return false;
Flickr: http://www.flickr.com/photos/glorycycles/" onclick="window.open(this.href);return false;

Top

aaric

Post subject: Re: New Quarq?

Posted: Tue Jan 29, 2013 11:35 pm

Joined: Thu Jun 09, 2011 4:10 pm
Posts: 139

removed - other people said similar stuff in the powermeter thread. move along.

Top

scott_racer

Post subject: Re: New Quarq?

Posted: Wed Jan 30, 2013 3:27 am

Joined: Sat Sep 23, 2006 11:30 am
Posts: 82
Location: Melbourne, Australia

The brochure for the new models mentions "clearance for oversize bottom brackets" for the Riken, but as far as I can see the back side of the spider looks the same for all the most recent models.

Can anyone confirm that the Red quarq, Elsa and Riken should all have the same clearance?

You can remove the preload adjusted from a BB30 S975 Quarq and it the spindle will fit in a BB386 bike, but the cadence magnet ring of the spider just interferes with my frame. Wanting to know if the newer models are more likely to work.

_________________
Start flat out ... then pick the pace up halfway

Top

Stalkan

Post subject: Re: New Quarq?

Posted: Wed Jan 30, 2013 1:34 pm

Joined: Tue Sep 21, 2010 1:04 pm
Posts: 45

cwdzoot,

Is that the weight for the whole crank or just the drive side?

Top

OwenN

Post subject: Re: New Quarq?

Posted: Wed Jan 30, 2013 4:49 pm

Joined: Sat Dec 24, 2011 2:28 am
Posts: 32
Location: Roanoke, VA

Quote:

cwdzoot,

Is that the weight for the whole crank or just the drive side?

Yes, I would like to know that as well. Also, what is the crank length? Compact or standard?

Top

Stalkan

Post subject: Re: New Quarq?

Posted: Wed Jan 30, 2013 4:54 pm

Joined: Tue Sep 21, 2010 1:04 pm
Posts: 45

I am a bit skeptical that it comes in 120g lighter than my 110BCD 170mm HG SRM, but you never now.

Top

HammerTime2

Post subject: Re: New Quarq?

Posted: Wed Jan 30, 2013 5:00 pm

Joined: Thu May 04, 2006 4:43 pm
Posts: 4587
Location: Wherever there's a mountain beckoning to be climbed

As I wrote in a similar discussion in the New powermeter rumours thread

http://www.quarq.com/quarq-elsa-10r wrote:

Weight 735g (GXP, 130BCD, 172.5mm)

Yes, quarq website figure is for GXP, not BB30, nevertheless ...

Top

Stalkan

Post subject: Re: New Quarq?

Posted: Wed Jan 30, 2013 5:03 pm

Joined: Tue Sep 21, 2010 1:04 pm
Posts: 45

I have seen all that but the man has one on a scale and it looks like it is just the drive side, but always best to not assume.

Top

Page 2 of 2

[ 28 posts ]

Go to page Previous 1, 2

Board index » Discussion » Road

Who is online

Users browsing this forum: mellowJohnny, oreoboreo, stax, Yahoo [Bot] and 87 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

	Author	Replies	Views	Last post
Quarq on a Foil? in Road	JBV	4	552	Sat Feb 02, 2013 8:32 am clarkson
Alternative to Quarq putty in Road	Martin.F	7	385	Sat Apr 20, 2013 1:14 pm Martin.F
Red Exogram Quarq with Campy 11-speed? in Road	bluingreen	6	504	Mon Jul 30, 2012 1:52 pm Dammit
Q-Factor Difference BB30/BSA using quarq in Road	ajminn	12	783	Sat Dec 08, 2012 2:35 pm drmutley
Rotor Power and Quarq Elsa in Road	Francois_Viviers	2	446	Mon Mar 04, 2013 10:08 pm djconnel