Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Sun Dec 04, 2016 9:26 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Sat Jan 26, 2013 9:26 pm 
Offline

Joined: Sun Nov 14, 2010 10:25 pm
Posts: 482
Hi,

Maybe a weird question but I'm building a road bike with discs. I wanted to use the standard steel fork that came with my frame but my disc is just touching the fork ever so slightly. One option would be to try and dent the fork in this particular area, but it is risky and after that I would need to weld disc tabs on the fork.

As an alternative I could by a new CX disc ready fork. Only problem is I also want to run some electronic gizmo's on the bike that requires a cable to enter through the steerer tube. So is it possible to enter the steerer tube through the brake mounting holes on the crown of this particular fork?
Image

Thanks

_________________
  • 2011 Cannondale Flash F1
  • 2010 Cannondale Caad9
  • 2000 Caad 4 aero



Top
   
PostPosted: Sat Jan 26, 2013 10:34 pm 
Offline
User avatar

Joined: Mon Aug 06, 2012 12:28 pm
Posts: 62
if the fork steerer tube has an exit hole at the bottom then you should be able to route the electronic cables down and out, minding clearance for the tyre, I have done this and it is a neat looking improvement. As for the brake lines, I would avoid and stay safe, plus the cable would have to bend in ways that would make the inner wire keep sticking with the friction.
Because they are brakes, I would leave as is.

_________________
No, I am not trying to sell you something.


Top
   
Posted: Sat Jan 26, 2013 10:34 pm 


Top
   
 
PostPosted: Sat Jan 26, 2013 10:39 pm 
Offline

Joined: Sun Nov 14, 2010 10:25 pm
Posts: 482
I meant electronic cables, yes.

This fork is not open on the bridge in between the legs. That's why I want to know if it's possible to run a cable through the mounting holes for a road brake or mudguards.

_________________
  • 2011 Cannondale Flash F1
  • 2010 Cannondale Caad9
  • 2000 Caad 4 aero



Top
   
PostPosted: Sun Jan 27, 2013 2:51 am 
Offline

Joined: Tue Nov 11, 2003 9:47 pm
Posts: 2196
Location: Santa Cruz, California, USA
If the end of the steerer is closed, then the brake mounting hole is not open to the steerer tube.

You could drill a small hole from inside the steerer to break into the brake hole, but that would require a long drill extension and the likelyhood of being able to drill an accurate and straight hole like that is low. I would not be comfortable drilling a big hole in it, especially when I can't see what's going on down there.


Top
   
PostPosted: Sun Jan 27, 2013 3:04 am 
Offline
Shop Owner / Manufacturer
User avatar

Joined: Thu Jan 24, 2013 8:48 am
Posts: 104
Location: Taiwan
You could drill a hole through the bottom of the bridge into the steerer tube and then block the external hole with a Velo Plug or even a piece of PU (like the clear pieces that are used to protect your HT from wear caused by the shift cables).
Having the hole there might even help you while you are routing the electric cable(s). Covering it over would be the last step.

_________________
BDop Cycling Co., Ltd.
www.bdopcycling.com


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. steerer tube fatigue and fatality

[ Go to page: 1 2 3 4 ]

in Road

mrgray

48

2653

Fri Dec 02, 2016 4:18 pm

joec View the latest post

There are no new unread posts for this topic. Scott Addict SL Cable Stops for internal cable routing

in Road

kulivontot

3

419

Sat Sep 10, 2016 4:33 am

kulivontot View the latest post

There are no new unread posts for this topic. Bar/stem combo for 1.25" steerer?

in Road

kkibbler

5

887

Sun Aug 07, 2016 7:17 am

A2ON View the latest post

There are no new unread posts for this topic. MCFK Steerer for Lefty on New Cannondale Slate

in Road

Snicks

7

1002

Sat Dec 12, 2015 2:49 pm

morrisond View the latest post

There are no new unread posts for this topic. Pinarello fork steerer compression plug

in Road

caballero

0

151

Thu Nov 10, 2016 3:37 pm

caballero View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Baidu [Spider], Bing [Bot], Google Adsense [Bot], Yahoo [Bot] and 29 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited