Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Thu Jul 28, 2016 9:28 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Coda hubs?
PostPosted: Tue Jan 15, 2013 6:56 pm 
Offline

Joined: Fri Dec 26, 2008 2:32 am
Posts: 147
Location: Mid. PA. USA
I picked up a rear wheel the other day on CL. It is a areohead rim laced to a coda hub.
It is pretty heavy @ 1000 grams due to the straight gauge spokes and steel nipples.
I am thinking about getting it rebuilt with butted spokes and alloy nipples.
Is the Coda hub any good? I only paid $10 for the wheel and I need a Shimano based wheel anyhow.
Brian


Top
   
 Post subject: Re: Coda hubs?
PostPosted: Wed Jan 16, 2013 6:27 am 
Offline

Joined: Mon Jan 14, 2013 10:57 pm
Posts: 82
Location: Denver
skiezo wrote:
I picked up a rear wheel the other day on CL. It is a areohead rim laced to a coda hub.
It is pretty heavy @ 1000 grams due to the straight gauge spokes and steel nipples.
I am thinking about getting it rebuilt with butted spokes and alloy nipples.
Is the Coda hub any good? I only paid $10 for the wheel and I need a Shimano based wheel anyhow.
Brian


I was more into MTB at the time, but Coda was Cannondale's house brand in the late 90s. I think they quit stamping stuff with that label but you can still find bits and bobs for very low prices. I would guess they are a bit heavy. Some of them were made for Cannondale by DT and some Sachs, others... I don't know. It's probably fine, though if it's as old as I suspect, I'd replace the bearings.


Top
   
 Post subject: Re: Coda hubs?
PostPosted: Wed Jan 16, 2013 1:04 pm 
Offline

Joined: Thu Aug 23, 2012 11:19 pm
Posts: 195
I was a Cannondale dealer during the Coda era. Quite well done for the time. The DT ones are obviously DT and even say so right on them. The other ones are not. Just a word of advice. Don't get them wet. The seals are awful. Outside of that one issue, they should hold up well.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 3 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. DT Swiss 350 hubs

in Road

burglarboycie

3

540

Fri May 13, 2016 10:28 pm

burglarboycie View the latest post

There are no new unread posts for this topic. Weight ZIPP Hubs

in Road

Schulbub

2

411

Wed Aug 19, 2015 9:49 am

rasmussloth View the latest post

There are no new unread posts for this topic. HED Jet with Tune Hubs from Planet X?

in Road

cccycle

3

1020

Fri Oct 30, 2015 11:11 pm

Jmdesignz2 View the latest post

There are no new unread posts for this topic. Carbon-Ti Road SL Hubs

in Road

NiFTY

11

809

Tue Dec 08, 2015 12:19 am

NiFTY View the latest post

There are no new unread posts for this topic. zipp safety recalls - QRs and also front hubs

in Road

sungod

3

495

Fri Mar 18, 2016 4:38 pm

tinozee View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: beanbiken, Bing [Bot], Google Adsense [Bot], pdlpsher1, reknop, Yahoo [Bot] and 24 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited