Hi guys, I'd like to present you my internal DIY Di2 setup

internal battery from ebay


head tube drilling


inner chainstays drilling


dropout drilling


bottom bracket drilling


Bike ready! (6.340kg)

_________________
Ride safe!
Eduardo
2008 Scott Addict R2

nice look except stem I want it black in your setup.

Looking great.

Nicely done!

Hi there,
What battery are you using? what did you use to physically do the drilling?
thanks
Bruce

Nice work but as I was very interested in this sort of project myself, it stopped me when I was reading in another WW topic that Scott would be against drilling cause the carbon tubes are too thin.

_________________
ciclismo-espresso.com

did it with a dremel and the battery is from ebay seller "eapathome", who is a member in this forum

_________________
Ride safe!
Eduardo
2008 Scott Addict R2

that's BS
my previous frame was a FACTORY DRILLED 2009 scott addict R1 - the tubes are exactly the same and the holes are also on the same locations.

_________________
Ride safe!
Eduardo
2008 Scott Addict R2

a video of the process would have been cool. How inconvenient is charging?

it´s CONvenient: the charger that comes with the internal battery charges thru the front wiring harness. You don't need to connect it to battery for charging. Just unplug the head unit cable and plug the charger to the wire.

_________________
Ride safe!
Eduardo
2008 Scott Addict R2

But do they still sell them like that or have they stopped having learned from experience

I don't have Di2 at all but am just curious if the battery just drops all they way down to the bottom, hangs there, weges some how, stops at the bottle cage bolt area??? Just curious. Looks good though. Nothing like drilling a perfectly nice frame! Well done!

_________________
09 Pinella w/ Record 10spd
http://1spd.blogspot.com/

of course they still sell them like that - but now it's the FO1L version (addict R1 are no longer made)

_________________
Ride safe!
Eduardo
2008 Scott Addict R2

i wrapped the battery with rubber (old inner tube) so it fits tight against the inside of the seatpost - this way it doesn't slip up/down.

_________________
Ride safe!
Eduardo
2008 Scott Addict R2

excellent work!

what do you do to ensure the wires do not rub on the crank spindle? gravity will want to pull them down a bit. that bend from the downtube wire as it curves up the seat tube is an issue (minor one!) i've had on a similar project i did.

was it difficult to get a dremel inside the bottom bracket? i'd imagine the angles are tight.

thanks for sharing!