Dura Ace 9000 - ETA late 2012/early 2013

Page 48 of 73

[ 1082 posts ]

Go to page Previous 1 ... 45, 46, 47, 48, 49, 50, 51 ... 73 Next

Print view

Previous topic | Next topic

Author

Message

hjb1000

Post subject: Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Thu Jan 10, 2013 1:10 am

Joined: Wed Sep 16, 2009 10:25 am
Posts: 112
Location: Australia

bruno2000 wrote:

I have a KMC 11spd link on a Dura-Ace 11spd chain and it work fine.

Thanks for confirming!
This is the 11 speed link that says 'Campagnolo 11 speed only', right?

Top

skinnywellfed

Post subject: Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Thu Jan 10, 2013 1:39 am

Joined: Sun Aug 19, 2012 5:41 am
Posts: 63

upside wrote:

I just installed the KMC 11 speed link. Unfortunately I am in New Hampshire and a bit cold and snowy, but hope to get out tomorrow. The chain went together as the 10 speeds went together, nice and solid. I don't see any issues.

bruno2000 wrote:

I have a KMC 11spd link on a Dura-Ace 11spd chain and it work fine.
Anyone has a complete manual for the DI2 11spd build up?

Thanks for the feedback guys.
Have you checked Shimano USA 'tech docs' for the DI2 manual?

hjb1000 wrote:

This is the 11 speed link that says 'Campagnolo 11 speed only', right?

No idea, never used the KMC links.............can you guys confirm?

@ member; "thisisatest", you were looking into the BEST product to use as a quick link. Did you reach a conclusion?

Top

thisisatest

Post subject: Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Thu Jan 10, 2013 2:59 am

Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1836
Location: NoVA/DC

KMC never got back to me about DA9k compatibility. So I'm taking a wait-and-see approach.

Top

MarkThailand

Post subject: Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Thu Jan 10, 2013 8:25 am

Joined: Thu Feb 23, 2012 1:19 pm
Posts: 57

Any ideas when the DA DI2 9070 groupset will be released?

_________________
2011 Cannondale Quick CX-1
2012 Lynskey Helix OS with SRAM Red
2013 Lynskey R330 with SRAM Red Quarq
2013 Parlee Z1 with DA 9070

Top

SvenNijs

Post subject: Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Thu Jan 10, 2013 11:13 am

Joined: Mon Dec 20, 2010 9:25 am
Posts: 129
Location: Sydaaneeeee

MarkThailand wrote:

Any ideas when the DA DI2 9070 groupset will be released?

I'm advised late Jan/early Feb for bikes fitted with the groupset. Loose product maybe later?

Top

petal666

Post subject: Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Thu Jan 10, 2013 11:28 am

Joined: Fri Dec 12, 2008 5:19 am
Posts: 510
Location: Brisbane, Oz

There are a couple of giants for sale here at the local giant concept store.

Top

bruno2000

Post subject: Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Thu Jan 10, 2013 12:57 pm

Joined: Fri Jun 17, 2005 4:11 pm
Posts: 428

I confirm the use of the KMC 11spd campa missing link.

Can not find an instruction manual to build up the Dura-Ace 11spd DI2???

Top

NCBikeGuy

Post subject: Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Thu Jan 10, 2013 5:17 pm

Joined: Tue Dec 04, 2012 4:00 pm
Posts: 11
Location: Off the back

petal666 wrote:

There are a couple of giants for sale here at the local giant concept store.

Do they have the new 9070 DA di2 or the mechanical 9000 gruppo?

Thanks

_________________
My rides:
2006 Look 555 Ultegra
2006 Felt B2 Dura Ace
2013 Cannondale Evo HiMod Dura Ace di2

Top

petal666

Post subject: Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Thu Jan 10, 2013 11:08 pm

Joined: Fri Dec 12, 2008 5:19 am
Posts: 510
Location: Brisbane, Oz

NCBikeGuy wrote:

petal666 wrote:

There are a couple of giants for sale here at the local giant concept store.

Do they have the new 9070 DA di2 or the mechanical 9000 gruppo?

Thanks

Sorry meant to quote the 9070 Di2 question, which it is. Someone is also paying them top $ to strip a Giant and put 9070 on his Venge this weekend.

Top

zail4me

Post subject: Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Fri Jan 11, 2013 1:10 am

Joined: Fri Jan 11, 2013 1:04 am
Posts: 3
Location: Iceland

hi there

My Trek P1 with di2 9070 is shipped and will be in my shop next week . :up:

Top

mann2

Post subject: Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Fri Jan 11, 2013 4:53 am

Joined: Sun Nov 04, 2012 11:36 am
Posts: 72

Grill wrote:

Anybody had a chance to try out the new C50 clincher? Waiting on reviews before I decide on it over a Hed Jet...

i got the c50s. very good rims but a bit porky at 1780~1790. reviewed them on my blog.

_________________
http://www.roadiemanila.com

Top

SvenNijs

Post subject: Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Fri Jan 11, 2013 10:03 am

Joined: Mon Dec 20, 2010 9:25 am
Posts: 129
Location: Sydaaneeeee

petal666 wrote:

There are a couple of giants for sale here at the local giant concept store.

Are they definitely the TCR Advanced SL0 with 11spd Dura Ace Di2 (black frame/blue highlights)?? :noidea:

If so, that's potentially good news for me...... :wink:

EDIT 15/01/13: Talked to the shop concerned today and they are not Giant production TCR Advanced SL0's (they're built from parts by the shop) therefore my news is bad... :cry:

Seems shops are getting 9070 groupsets/parts arriving though, so those waiting for them may be in luck.

Last edited by SvenNijs on Tue Jan 15, 2013 6:15 am, edited 1 time in total.

Top

Tinea Pedis

Post subject: Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Fri Jan 11, 2013 10:30 am

Moderator

Joined: Sat Mar 14, 2009 6:08 am
Posts: 6565
Location: Geeeelong!

Just off a Guerciotti with 9000.

Holy cow, it is nice!

Never thought I would say that about Shimano...

Now, to test a Campag 11 wheel in it. Then the Mavic wheel on my Campag bike

_________________
Baum Ristretto, Baum Mondrian Corretto & the '89 Merckx! | "If you could eat it in one sitting, hold your line." | twitter.com/Tinea_Pedis

Top

stevec1975

Post subject: Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Fri Jan 11, 2013 10:33 am

Joined: Tue Nov 24, 2009 12:37 pm
Posts: 71

Not sure its been pictured before, bikerumor has the first shots and weight of the Shimano internal seatpost battery:

http://www.bikerumor.com/2013/01/10/clo ... more-53447

_________________
Scott CR1 - 12.84Ib

Top

BdaGhisallo

Post subject: Re: Dura Ace 9000 - ETA late 2012/early 2013

Posted: Fri Jan 11, 2013 4:13 pm

Joined: Wed Mar 17, 2004 1:38 pm
Posts: 1222

I have heard repeatedly that the 9070 RD and FD are less bulky than their 7970 predecessors due to smaller motors, but I have never seen them compared.

Does anyone have any pics of them side by side so that size difference can be seen?

Top

Page 48 of 73

[ 1082 posts ]

Go to page Previous 1 ... 45, 46, 47, 48, 49, 50, 51 ... 73 Next

Board index » Discussion » Road

Who is online

Users browsing this forum: Bing [Bot], erik$, ferrarista, jeffbong and 60 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

	Author	Replies	Views	Last post
Dura ace 9000 di2 vs Campy EPS [ Go to page: 1, 2 ] in Road	Ufgators	17	3843	Tue Sep 04, 2012 9:24 am thisisatest
Dura Ace 9000 FD compatibility [ Go to page: 1, 2, 3 ] in Road	TimmS	33	4254	Mon Mar 04, 2013 8:16 pm Berg
Dura Ace 9000 compatibility in Road	insightt47	2	278	Thu May 16, 2013 5:47 am insightt47
Dura Ace 9000 hubs [ Go to page: 1, 2 ] in Road	upside	26	4508	Wed Feb 20, 2013 7:52 am eric01
Dura Ace 9000 Demo Bike in Road	rOYk	3	1139	Thu Jul 26, 2012 11:14 am rOYk